A protective coating of 60SiO2–15CaO–10Al2O3–10Na2O–5TiO2 glass ceramic was performed on the ferritic stainless steel substrate by slurry technique. X-ray diffraction and scanning electron microscopy were used for detailed analyses of the coating. Open circuit potential, electrochemical impedance spectroscopy and potentiodynamic polarisation studies were carried out in artificial seawater to monitor the corrosion resistance behaviour of the coating at room temperature. The presence of coating reduced the corrosion current density Icorr and shifted corrosion potential Ecorr towards more noble values. It has been established through this study that glass ceramic coating on the steel substrate essentially improves the corrosion resistance property of the alloy and can be used for marine applications.
FernandesFAP, HeckSC, PiconCA, TottenGE, CastelettiLC: ‘Wear and corrosion resistance of pack chromised carbon steel’, Surf. Eng., 2012, 28, (5), 313–317.
3.
KimKM, KimJH, LeeYY, KimKY: ‘Effect of immersion in NaOH solution on ferritic steel as a bipolar plate for polymer electrolyte membrane fuel cells’, Int. J. Hydrogen Energy, 2011, 36, 13014–13021.
4.
SakaiRT, da CruzFMDL, de MeloHG, BenedettiAV, SantilliCV, SuegamaPH: ‘Electrochemical study of TEOS, TEOS/MPTS, MPTS/MMA and TEOS/MPTS/MMA films on tin coated steel in 3·5% NaCl solution’, Prog. Org. Coat., 2012, 74, 288–301.
De AraujoP, SteyerP, MilletJ.-P, DamondE, StauderB, JacquotP: ‘PVD, aluminium alloy coatings: environmentally friendly alternative to protect steel parts against corrosion’, Surf. Eng., 2003, 19, (4), 304–309.
7.
IostA, BigotR, BarbieuxF, VastP: ‘Mechanical behavior of metaphosphate glasses used as coating on metals in relation to their structure and preparation method’, J. Mater. Sci., 1999, 34, 3991–3996.
8.
KaurB, SinghK, PandeyOP: ‘Microstructural study of Crofer 22 APU–glass interface for SOFC application’, Int. J. Hydrogen Energy, 2012, 37, 3839–3847.
AlaviSH, DehghanianC, TaheriP: ‘Investigation of corrosion behaviour of carbon steel coated by pulsed plasma electrolytic boronising technique in 3·5 wt-% NaCl aqueous solution’, Surf. Eng., 2011, 27, (7), 509–514.
12.
VerdianMM, SalehiM, RaeissiK: ‘Microstructure formation and properties of HVOF sprayed NiTi coatings prepared from amorphous/nanocrystalline NiTi powders’, Surf. Eng., 2010, 26, (6), 491–496.
13.
JiangJ, WangY, ZhongQ, ZhouQ, ZhangL: ‘Preparation of Fe2B boride coating on low-carbon steel surfaces and its evaluation of hardness and corrosion resistance’, Surf. Coat. Technol., 2011, 206, 473–478.
14.
VijayakumarJ, MohanS: ‘Comparative study of microstructure and corrosion properties in 3·5% NaCl solution of electrodeposited nickel obtained from various baths’, Surf. Eng., 2011, 27, (1), 32–36.
15.
LiuC, BiQ, LeylandA, MatthewsA: ‘An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0·5 N NaCl aqueous solution. Part I: establishment of equivalent circuits for EIS data modelling’, Corros. Sci., 2003, 45, (6), 1243–1256.
16.
MacdonaldJR: ‘Impedance spectroscopy emphasizing solid materials and systems’; 1987, New York, John Wiley & Sons.
17.
SarmentoVHV, SchiavettoMG, HammerP, BenedettiAV, FugivaraCS, SuegamaPH: ‘Corrosion protection of stainless steel by polysiloxane hybrid coatings prepared using the sol–gel process’, Surf. Coat. Technol., 2010, 204, 2689–2701.
18.
ZhangX, van den BosC, SloofWG, TerrynH, HovestadA, de WitJHW: ‘Investigation of Cr(III) based conversion coatings on Electrogalvanised Steel’, Surf. Eng., 2004, 20, (4), 244–250.
19.
SubramanianB, AshokK, SubramanianK, SastikumarD, SelvanG, JayachandranM: ‘Evaluation of corrosion and wear resistance titanium nitride (TiN) coated on mild steel (MS) with brush plated nickel interlayer’, Surf. Eng., 2009, 25, (7), 490–495.
20.
CalataJN, LuG, ChuangT: ‘Constrained sintering of glass, glass–ceramic and ceramic coatings on metal substrates’, Surf. Interface Anal., 2001, 31, 673–681.
21.
AshrafiA, GolozarMA, MallakpourS: ‘Corrosion behaviour of 316L stainless steel coated by amorphous and semicrystalline polypyrrole’, Surf. Eng., 2009, 25, (2), 120–126.
22.
DattaS, DasS: ‘A new high temperature resistant glass-ceramic coating for gas turbine engine components’, Bull. Mater. Sci., 2005, 28, 689–696.
