The microstructure, blood biocompatibility and corrosion resistances, and mechanical properties of multinary ZrTiCN and ZrTiC composite films are investigated and compared to those of ZrCN film, ZrC film and NiTi shape memory alloy. The quaternary ZrTiCN and ternary ZrTiC composite films with ZrC and TiC as the predominant phases have a poor crystallinity but a higher adhesion strength with the NiTi substrate than both ZrCN and ZrC films due to the increased deposition temperature and the presence of TiC/TiN phases. Both coatings can improve the surface mechanical properties of biomedical NiTi shape memory alloy while simultaneously offering distinct advantages such as improved blood biocompatibility and corrosion resistances.
CaicedoJC, AperadorW and AguilarY: ‘Tribological performance evidence on ternary and quaternary nitride coatings applied for industrial steel’, Rev Mex. Fís., 2013, 59, 364–373.
2.
NingshenS, GuptaRK, KamalS, ChawlaV, ChandraR and MudaliUK: ‘Corrosion study of ZrN deposited on 304L stainless steel’, Surf. Eng., 2013, 29, 264–270.
3.
DemirAG, LecisN, PrevitaliB and UguesD: ‘Scratch resistance of fibre laser surface textured TiN coatings’, Surf. Eng., 2013, 29, 654–659.
4.
BalázsiK, LukácsIE, GurbánS, MenyhárdM, BacákováL, VandrovcováM and BalázsiC: ‘Structural, mechanical and biological comparison of TiC and TiCN nanocomposites films’, J. Eur. Ceram. Soc., 2013, 33, 2217–2221.
5.
BalázsiK, VandrovcováM, BačákováL and BalázsiCs: ‘Structural and biocompatible characterization of TiC/a:C nanocomposite thin films’, Mater. Sci. Eng. C, 2013, C33, 1671–1675.
6.
ChuCL, JiHL, YinLH, PuYP, LinPH and ChuPK: ‘Microstructure, mechanical properties, and blood compatibility of zirconium nitride deposited on nickel–titanium shape memory alloy’, Surf. Coat. Technol., 2010, 204, 2841–2845.
7.
XueXY, ChuCL, YinLH, PuYP and ChuPK: ‘Cytocompatibility and haemocompatibility of Zr, ZrC and ZrCN films’, Surf. Eng., 2012, 28, 448–452.
8.
HollsteinF, KittaD, LoudaP, PacalF and MeinhardtJ: ‘Investigation of low-reflective ZrCN PVD-arc coatings for application on medical tools for minimally invasive surgery’, Surf. Coat. Technol., 2001, 142–144, 1063–1068.
9.
GalindoRE, ManninenNK, PalacioC and CarvalhoS: ‘Advanced surface characterization of silver nanocluster segregation in Ag-TiCN bioactive coatings by RBS, GDOES, and ARXPS’, Anal. Bioanal. Chem., 2013, 405, 6259–6269.
10.
ZhengYF, LiuXL and ZhangHF: ‘Properties of Zr–ZrC–ZrC/DLC gradient films on TiNi alloy by the PIIID technique combined with PECVD’, Surf. Coat. Technol., 2008, 202, 3011–3016.
11.
OtsukaK and WaymanCM: ‘Shape memory materials’; 1998, Cambridge, Cambridge University Press.
WilliamsDF: ‘Toxicology of implanted metals. Fundamental aspects of biocompatibility’, in ‘CRC series in biocompatibility’, Vol. II, 45–61; 1981, Boca Raton, FL, CRC Press.
14.
TakamuraK, HayashiK, IshinishiN, YamadaT and SugiokaY: ‘Evaluation of carcinogenecity and chronic toxicity associated with orthopedic implants in mice’, J. Biomed. Mater. Res., 1994, 28, 583–589.
15.
BrownR and AliasMN: ‘Effect of composition and thickness on corrosion behavior of TiN and ZrN thin films’, Surf. Coat. Technol., 1993, 62, 467–473.
16.
KumarA and KaurD: ‘Nanoindentation and corrosion studies of TiN/NiTi thin films for biomedical applications’, Surf. Coat. Technol., 2009, 204, 1132–1136.
17.
TongQF, ShiJL, SongYZ, HuXF and LiuL: ‘Research on properties and microstructures of ZrC/C composites’, Aerosp. Mater. Technol., 2004, 2, 45–48.
18.
XiangDY, LiYY: ‘Carbothermal reduction synthesis and phase evolution of TiC powder’, Mater. Rev., 2009, 23, 106–108.
19.
TungHM, HuangJH, TsaiDG, AiCF and YuGP: ‘Hardness and residual stress in nanocrystalline ZrN films: effect of bias voltage and heat treatment’, Mater. Sci. Eng. A, 2009, A500, 104–108.
20.
ZhangJ, RenX, OtsukaK and AsaiM: ‘Reversible change in transformation temperatures of a Ti–51at%Ni alloy associated with alternating aging’, Scr. Mater., 1999, 41, 1109–1113.
