A new method of laser plasma deposition had been applied to synthesise the silicon carbonitride (SiCN) coatings on stainless steel substrates and cutting devices using hexamethyldisilazane Si2NH(CH3)6 as a precursor. The precursor vapours were activated by powerful optical pulsating discharge in a high velocity gas stream (Ar). Characterisation of the films has been carried out by complex methods. The deposited coatings are amorphous, uniform in thickness and decorate surfaces of different engineering materials quite well. The nanohardness of SiCN coatings was estimated as 15–24 GPa.
JervisTR: ‘Metal film deposition by gas-phase laser pyrolysis of nickel tetracarbonyl’, J. Appl.Phys., 1985, 53, (3), 1400–1401.
2.
KononovVI and UglovSA: ‘Laser-plasma synthesis of diamond films’, Quantum Electron., 1998, 25, (4), 291–294.
3.
BagayevSN, GrachevGN, DeminVN, SmirnovAL, SmirnovJu and SmirnovaTP: Patent RU 2 416 673 C2, May 20, 2011, Bul. 11.
4.
GrachevGN, IvanchenkoAI and PonomarenkoAG: ‘Pulsed-periodic q-switching mode of CO2 laser with an average power of 2 kW and peak power up to 500 kW’, Abstracts Int. Conf. Laser Optics 93, Saint-Petersburg, Russia, 1993, Russian Research Center/S.I.Vavilov State Optical Institute, 130.
5.
GrachevGN, PonomarenkoAG, SmirnovAL, TischenkoVN and TretiakovK: ‘Production of a powerful optical pulsating discharge (POPD) by CO2 pulse-periodic laser radiation in supersonic gas flow’, Laser Phys., 1996, 6, (12), 376–380.
6.
BeslingWFA, GoosensA, MeestersB and SchanmannJ: ‘Laser-induced chemical vapor deposition of nanostructed silicon carbonitride films’, J. Appl. Phys., 1998, 83, (1), 544–549.
7.
BadzianA, BadzianT, RoyR and DruwlW: ‘Silicon carbonitride, a new hard material and its relation to the confusion about harder than diamond C3N4’, Thin Solid Films, 1999, 354, 148–153.
8.
ZhifengS, WangY, DuC, HuangN, WangL and NingC: ‘The structure, surface topography and mechanical properties of Si-C-N films fabricated by RF and DC magnetron sputtering’, Appl. Surf. Sci., 2011, 258, 1328–1336.
9.
PetterssonM, BerlindT, SchmidtS, JacobsonS, HultmanL, PerssonC and EngqvistH: ‘Structure and composition of silicon nitride and silicon carbon nitride coatings for Joint replacements’, Surf. Coat. Technol., 2013, 295, 827–834.
10.
LiaoN, XueW, ZhouH and ZhangM: ‘Atomistic investigation of structural and mechanical properties of silicon carbon nitride with different SiC/Si3N4 ratios’, Mater. Chem. Phys., 2013, 143, 223–227.
11.
KaczmarekL, KyzolK, SawickiJ, SteglifiskiM, RadziszewskaH, SzymafiskiW, KolodziejczykL, AtraszkiewiczR, KottferD and ZawadzkiP: ‘The influence of chemical groups on the mechanical properties of SiCNH coatings deposited on 7075 aluminum alloy’, Thin Solid Films, 2013, 534, 15–21.
12.
SmirnovaTP, ShainyanBA, BorisovVO and RakhlinVI: ‘Effect of the chemical structure of silyl derivatives of unsymmetrical dimethylhydrazine on the composition and structure of silicon carbonitride films: theoretical and experimental studies’, Inorg. Mater., 2007, 43, (4), 373–378.
13.
PeterS, GüntherM, BergS, ClausnerA and RichterF: ‘Mid-frequency PECVD of a-SiCN:H films and their structural, mechanical and electrical properties’, Vacuum, 2013, 90, 155–159.
14.
Blaszczyk-LezakI, WrobelAM, AokiT, NakanishiY, KucinskaI and TraczA: ‘Remote nitrogen microwave plasma chemical vapor deposition from a tetramethyldisilazane precursor. Growth mechanism, structure and surface morphology of silicon carbonitride films’, Thin Solid Films, 2006, 497, (1–2), 24–34.
BagayevSN, GrachevGN, PonomarenkoAG, SmirnovAL, DeminVN, OkotrubAV, BaklanovAM and OnischukAA: ‘A new method of laser-plasma synthesis of nanomaterials. First results and prospects’, Proc. SPIE, 2007, 6732–673206.
17.
ManifacierJC, GasiotJ and FillardJP: ‘A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin film’, J. Phys. E, 1976, 9E, 1002–1004.
18.
JönssonB and HogmarkS: ‘Hardness measurements of thin films’, Thin Solid Films, 1984, 114, 257–269.
