The coating is considered as one of the best solutions to enhance the life of engineering components against hot corrosion. In the present study the NiCoCrAlY coating was successfully deposited on Superni 600 superalloy with cold spray process. The microstructure of the developed coating is appropriate to protect the components of power plant industry against hot corrosion. The evaluation of the coating has been done for porosity, microhardness, microstructure and phase formation with the help of optical microscopy, scanning electron microscopy (SEM)/ Energy Dispersive Spectroscopy (EDS) and X-ray diffraction (XRD) examination.
SidhuT. S., AgrawalR. D. and PrakashS.: ‘Hot corrosion of some superalloys and role of high-velocity oxy-fuel spray coatings – a review’, Surf. Coat. Technol., 2005,
198, 441–446.
2.
KalsiS. B. S., SidhuT. S. and SinghH.: ‘Performance of cold spray coatings on Fe-based superalloy in Na2SO4-NaCl environment at 900°C’, Surf. Coat. Technol., 2014,
240, 456–463.
ZhuQ. J., WangK., WangX. H. and HouB. R.: ‘Electrochemical impedance spectroscopy analysis of cold sprayed and arc sprayed aluminium coatings serviced in marine environment’, Surf. Eng., 2012,
28, 300–305.
5.
SinghH., SidhuT. S., KarthikeyanJ. and KalsiS. B. S.: ‘Development and characterization of Cr3C2-NiCr coated superalloy by novel cold spray process’, Material. Manufact. Process., 2014, DOI: 10.1080/10426914.2014.973599.
6.
GoyalT., WaliaR. S. and SidhuT. S.: ‘Study of coating thickness of cold spray process using taguchi method’, Mater. Manufact. Process., 2012,
27, (2), 185–192.
7.
KarthikeyanJ.: ‘Cold spray technology: International status and USA efforts’, report by ASB Industries, 2004.
8.
SinghH., SidhuT. S. and KalsiS. B. S.: ‘Cold spray technology: future of coating deposition processes’Frattura Integr. Struttur., 2012,
22, 69–84.
9.
KalsiS. B. S., SidhuT. S., SinghH. and KarthikeyanJ.: ‘Behavior of cold spray coating in real incineration environment’, Mater. Manufact. Process., 2014, DOI: 10.1080/10426914.2014.912319.
10.
KalsiS. B. S., SidhuT. S. and SinghH.: ‘Chlorine based hot corrosion study of cold sprayed NiCrAlY coating’, Surf. Eng., 2014,
30, (6), 422–431, DOI: 10.1179/1743294413Y.0000000233.
11.
KalsiS. B. S., SidhuT. S. and SinghH.: ‘Performance of cold spray coating in industrial medical waste incinerator’, Surf. Eng., 2014,
30, (5), 352–360.
12.
BalaN., SinghH. and PrakashS.: ‘Characterization and high-temperature oxidation behavior of cold-sprayed Ni-20Cr and Ni-50Cr coatings on boiler steel’, Metall. Mater. Trans. A, 2011,
42A, 3399–3416.
13.
BalaN., SinghH., KarthikeyanJ. and PrakashS.: ‘Cold spray coating process for corrosion protection: a review’, Surf. Eng., April 2013.
14.
ManapA., NooririnahA., MisranH., OkabeT. and OgawaK.: ‘Experimental and SPH study of cold spray impact between similar and dissimilar metals’, Surf. Eng.2014,
30, (5), 335–341.
15.
SinghH., SidhuT. S. and KalsiS. B. S.: ‘Development of cold spray from innovation to emerging future coating technology’, J. Brazilian Soc. Mech. Sci. Eng., 2013,
35, (3), 231–245.
16.
GhelichiR. and GuaglianoM.: ‘Coating by the cold spray process: a state of the art’, Frattura Integr.` Struttur., 2009,
8, 30–44.
17.
DickinsonM. E. and YamadaM.: ‘A new method for measuring shear adhesion strength of ceramic cold spray splats’, Nanosci Nanotechnol. Lett., 2010,
2, (4), 348–351.
18.
LiC.-J and LiW.-Y: ‘Deposition characteristics of titanium coating in cold spraying’, Surf. Coat. Technol., 2003,
167, 278–283.
19.
LiX.-B: ‘Investigation of cold sprayed NiCoCrAlY bond coating’, Adv. Mater. Res., 2009,
79–82, 863–866.
