Strengthening mechanism and metal/ceramic bonding interface of cold sprayed TiN p /Al5356 deposits

Abstract

As the literature reported, the microhardness of particle reinforced metal matrix composite coatings fabricated by cold spraying (CS) could be significantly increased compared to pure metallic coatings by CS. However, the correlation between the strengthening mechanism of reinforcements and the microhardness increment is still not well revealed. Therefore, in this study, two strengthening mechanisms of reinforcement particles in CSTiN_p/Al5356 coatings, i.e. the strain hardening effect of reinforcement particles tamping on the metal matrix and the dispersion strengthening effect of uniformly dispersed reinforcement particles, were studied, and the proportions by two strengthening effects were qualitatively characterised as a first approximation by a proposed microhardness calculation model based on the hardness data of both the as sprayed and heat treated coatings. Results show that the dispersion strengthening effect of TiN particles plays a greater role in microhardness increment than the strain hardening effect of TiN tamping on the Al5356. In addition, the bonding interface of metal/ceramic particles in TiN_p/Al5356 coatings was characterised using a transmission electron microscope for revealing the bonding features at the interface. Results show that although an intimate contact (i.e. bonding) is formed at the TiN_p/Al5356 interface, the bonding is relatively weak, with some cracks or pores possibly present at the interface.

Keywords

Cold spraying Particles reinforced metal matrix composite Strengthening mechanism Microhardness Bonding interface

Get full access to this article

View all access options for this article.

References

Seo

, Ogawa

, Suzuki

, Ichimura

, Shoji

and Murata

: ‘Comparative study on oxidation behavior of selected MCrAlY coatings by elemental concentration profile analysis’, Appl. Surf. Sci., 2008, 255, 2581–2590. doi: 10.1016/j.apsusc.2008.07.141

C. J.

and Li

W. Y.

: ‘Characterization of cold-sprayed nanostructured Fe-based alloy’, Appl. Surf. Sci., 2010, 256, 2193–2198. doi: 10.1016/j.apsusc.2009.09.072

Rolland

, Sallamand

, Guipont

, Jeandin

, Boller

and Bourda

: ‘Damage study of cold-sprayed composite materials for application to electrical contacts’, J. Therm. Spray Technol., 2012, 21, 758–772. doi: 10.1007/s11666-012-9756-z

Ning

X. J.

, Kim

J. H.

, Kim

H. J.

and Lee

C. H.

: ‘Characteristics and heat treatment of cold-sprayed Al-Sn binary alloy coatings’, Appl. Surf. Sci., 2009, 255, 3933–3939. doi: 10.1016/j.apsusc.2008.10.074

Wang

, Birbilis

and Zhang

M. X.

: ‘Process optimisation of cold spray Al coating on AZ 91 alloy’, Surf. Eng., 2014, 30, 323–328. doi: 10.1179/1743294413Y.0000000224

W. Y.

, Yang

C. L.

and Liao

H. L.

: ‘Effect of vacuum heat treatment on microstructure a nd microhardness of cold-sprayed TiN particle-reinforced Al alloy-based composites’, Mater. Des., 2011, 32, 388–394. doi: 10.1016/j.matdes.2010.06.002

W. Y.

, Zhang

, Guo

X. P.

, Liao

H. L.

and Coddet

: ‘Characterizations of Cold-sprayed TiN Particle-reinforced Al Alloy-based Composites-from Structures to Tribological Behaviour’, Adv. Eng. Mater., 2007, 9, 577–583. doi: 10.1002/adem.200700085

, Li

W. Y.

, Suo

X. K.

and Liao

H. L.

: ‘Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed Si Cp/Al 5056 composite coatings’, Surf. Coat. Technol., 2013, 220, 102–106. doi: 10.1016/j.surfcoat.2012.05.050

Meydanoglu

, Jodoin

and Kayali

E. S.

: ‘Microstructure, mechanical properties and corrosion Performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process’ Surf. Coat. Technol., 2013, 235, 108–116. doi: 10.1016/j.surfcoat.2013.07.020

10.

Sansoucy

, Marcoux

, Ajdelsztajn

and Jodoin

: ‘Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process’ Surf. Coat. Technol., 2008, 202, 3988–3996. doi: 10.1016/j.surfcoat.2008.02.017

11.

Yandouzi

, Richer

and Jodoin

: ‘SiC particulate reinforced Al-12Si alloy composite coatings produced by the pulsed gas dynamic spray process: microstructure and properties’ Surf. Coat. Technol., 2009, 203, 3260–3270. doi: 10.1016/j.surfcoat.2009.04.001

12.

Tao

Y. S.

, Xiong

T. Y.

, Sun

, Du

and Li

T. F.

: ‘Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy’ Appl. Surf. Sci., 2009, 256, 261–266. doi: 10.1016/j.apsusc.2009.08.012

13.

Hodder

K. J.

, Izadi

, McDonald

A. G.

and Gerlich

A. P.

: Mater. Sci. Eng. A, 2012, A556, 114–121. doi: 10.1016/j.msea.2012.06.066

14.

Wang

, Spencer

, Birbilis

and Zhang

M. X.

: ‘The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate’ Surf. Coat. Technol., 2010, 205, 50–56. doi: 10.1016/j.surfcoat.2009.08.035

15.

Hodder

K. J.

, Nychka

J. A.

and McDonald

A. G.

: ‘Comparison of 10 μm and 20 nm Al-Al2O3 metal matrix composite coatings fabricated by low-pressure cold gas dynamic spraying’ J. Therm. Spray Technol., 2014, 23, 839–848. doi: 10.1007/s11666-014-0094-1

16.

Bakshi

S. R.

, Singh

, Balani

, McCartney

D. G.

, Seal

and Agarwal

: ‘Carbon nanotube reinforced aluminum composite coating via cold spraying’ Surf. Coat. Technol., 2008, 202, 5162–5169. doi: 10.1016/j.surfcoat.2008.05.042

17.

, Li

W. Y.

, Chen

, Suo

X. K.

and Liao

H. L.

: ‘Effect of matrix/reinforcement combination on cold sprayed coating deposition behavior’ Surf. Eng., 2014, 30, 796–800. doi: 10.1179/1743294414Y.0000000346

18.

Phani

P. S.

, Vishnukanthan

and Sundararajan

: ‘Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings’ Acta Mater., 2007, 55, 4741–4751. doi: 10.1016/j.actamat.2007.04.044

19.

Luo

X. T.

, Yang

G. J.

, Li

C. J.

and Kondohb

: ‘High strain rate induced localized amorphization in Cubic BN/NiCrAl nanocomposite through high velocity impact’ Scr. Mater., 2011, 65, 581–584. doi: 10.1016/j.scriptamat.2011.06.030

20.

Kim

H. J.

, Lee

C. H.

and Hwang

S. Y.

: ‘Superhard nano WC-12% Co coating by cold spray deposition’ Mater. Sci. Eng. A, 2005, A391, 243–248.

21.

Wang

H. T.

, Yang

G. J.

and Li

C. X.

: ‘Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating’ Vacuum, 2008, 83, 146–152. doi: 10.1016/j.vacuum.2008.03.094

22.

K. H.

, Choi

J. O.

and Lee

: ‘Intermixing and interfacial morphology of cold-sprayed Al coatings on steel’ Mater. Lett., 2014, 136, 45–47. doi: 10.1016/j.matlet.2014.07.142

23.

Borchers

, Gartner

, Stoltenhoff

and Kreye

: ‘Microstructural bonding features of cold sprayed face centered cubic metals’ J. Appl. Phys., 2004, 96, 4288–4292. doi: 10.1063/1.1789278

24.

Borchers

, Gartner

and Stoltenhoff

: Microstructural and macroscopic properties of cold sprayed copper coatings J. Appl. Phys., 2003, 93, 10064–10070. doi: 10.1063/1.1573740