Influence of reactivity of fly ash on geopolymerisation

Abstract

The reactivity of fly ash has been altered through an increase in glass content by air classification and mechanical activation using vibratory and attrition mills. The effect of the reactivity on fly ash geopolymerisation has been investigated with specific reference to edging of fly ash with alkali at 27°C and geopolymerisation schemes involving edging and thermal curing or direct thermal curing at 60°C. The effect of improved reactivity of fly ash on the resulting geopolymers was studied through determination of compressive strength, phase formation by X-ray diffraction and microstructural evaluation by scanning electron microscopy. The improvement in compressive strength is found to be related to the improved reactivity and resulting formation of compact microstructure. Selection of geopolymerisation scheme is found to be a key factor to realise beneficial effect of improved reactivity. Isothermal conduction calorimetry studies along with differential thermal analysis (TG/DTA) were carried out to elucidate the influence of improved reactivity during geopolymerisation. Finer particle size resulted in greater dissolution of fly ash during edging. However, the overall process of geopolymerisation and strength development was found to depend not only on dissolution but also on subsequent stages of geopolymerisation. Mechanically induced reactivity is found to have far greater influence on geopolymerisation and strength development vis-à-vis reactivity induced by finer particle size and higher glass content obtained through air classification.

Keywords

FLY ASH CLASSIFICATION MECHANICAL ACTIVATION REACTIVITY ALKALIS GEOPOLYMERISATION COMPRESSIVE STRENGTH

Get full access to this article

View all access options for this article.

References

Breck

D. W.

: ‘Zeolite molecular sieves: Structure, chemistry and use’; 1974, New York, John Wiley.

Barrer

R. M.

and Baynham

J. W.

: J. Chem. Soc., 1956„ 2892–2903.

Davidovits

: Proc. 1st Eur. Conf. on ‘Soft mineralogy’, Compiegne, France, 1988, Geopolymer Institute and Universite de Technologie, 25–48.

and Van Deventer

J. S. J.

: Int. J. Miner. Process., 2000, 59, (3), 247–266.

Palomo

, Grutzeck

M. W.

and Blanco-Varela

M. T.

: Gem. Concr. Res., 1999, 29, 1323–1329.

Swanepoel

J. C.

and Strydom

C. A.

: Appl. Geochem., 2002, 17, 1143–1148.

Van Jaarsveld

J. G. S.

and van Deventer

J. S. J.

: Ind Eng. Chem. Res., 1999, 38, (10), 3932–3941.

Bakharev

: Gem. Concr. Res., 2005, 35, 1233–1246.

Hardjito

and Rangan

B. V.

Curtin research report on fly ash based geopolymer concrete’, Report GC 2, Curtin University of Technology, Australia, 2006.

10.

Rangan

B. V.

, Hardjito

, Wallah

S. E.

and Sumajouw

D. M. J.

: Proc. 4th World Cong. on ‘Geopolymer’, Saint Quentin, France, June 2005, 133–137.

11.

van Jaarsveld

J. G. S.

, van Deventer

J. S. J.

and Lorenzen

: Miner. Eng., 1996, 10, 659–669.

12.

Bankowski

, Zou

and Hodges

: J. Haz. Mater., 2004, B114, 59–67.

13.

Fernandez-Jimenez

, Palomo

, Sobrados

and Sanz

: Micropor. Mesopor. Mater., 2006, 91, 111–119.

14.

Weng

, Sagoe-Crentsil

, Brown

and Song

: Mater. Set Eng. B, 2005, 117B, (2), 163–168.

15.

Palomo

, Alonso

, Fernandez-Jimenez

, Sobrados

and Sanz

: J. Am. Ceram. Soc., 2004, 87, (6), 1141–1145.

16.

Fernandez-Jimenez

and Palomo

: Fuel, 2003, 82, 2259–2265.

17.

Skvara

and Bohunek

: Ceram. Silikaty, 1999, 43, (3), 111–116.

18.

Kumar

, Rajinikanth

, Alex

T. C.

, Mittra

B. K.

, Khan

Z. H.

, Mishra

I. B.

, Bandopadhyay

and Kumar

: Proc. Int. Conf. on ‘Advances in concrete composites and structures (ICACS-2005)’, Chennai, India, Vol. 1, 113–120; 2005, Allied Publishers.

19.

Juhasz

A. Z.

and Opoczky

: ‘Mechanical activation of minerals by grinding: Pulverizing and morphology of particles’; 1994, New York, Ellis Horwood Ltd.

20.

Boldyrev

V. V.

: Chem. Sustain. Devel, 1986, 83, (11/12), 821–822.

21.

Fernandez-Bertran Jose

: Pure Appl. Chem., 1999, 71, (4), 581–586.

22.

Baomin

and Li-Jiu

: Proc. Int. Conf. World Coal Ash, KY, USA, April 2005, 159–169.

23.

RamaMurthy

, UdayaBhaskar

, Ramakrishnan

, Srivastava

J. K.

and Kumar

: Proc. Intl. Cong. Fly Ash India, New Delhi, December 2005, X21.1–21.8.

24.

Huang

, Hwang

J. Y.

and Gillis

J. M.

: J. Miner. Mater. Charact. Eng., 2003, 2, (1), 11–31.

25.

Kumar

, Kumar

, Alex

T. C.

, Bandopadhyay

and Mehrotra

S. P.

: Proc. 4th World Cong. on ‘Geopolymer’, Saint Quentin, France, June 2005, Geopolymer Institute, 113–116.

26.

Kumar

, Kumar

, Bandopadhyay

, Alex

T. C.

and Mehrotra

S. P.

: Proc. Int. Conf. Fly Ash Utilization, India, December 2005.

27.

Kumar

, Kumar

, Bandopadhyay

and Mehrotra

S. P.

: Proc. Int. Conf. on ‘Mineral processing technology’, Chennai, India, Vol.2, 24–30; 2006, Allied Publishers.

28.

Barbosa

V. F. F.

and MacKenzie

K. J. D.

: Mater. Res. Bull., 2003, 38, 319–331.

29.

Granizo

M. L.

, Blanco-Verela

M. T.

and Palomo

: J. Mater. Set, 2000, 35, 6309–6315.

30.

Granizo

M. L.

, Alonso

, Blanco-Verela

M. T.

and Palomo

: J. Am. Ceram. Soc., 2002, 85, (1), 225–231.