Magnetic ceramics of the type of spinel nanoferrites of Co1−xCuxFe2O4 with Cu concentrations of x = 0·00, 0·25, 0·50, 0·75 and 1·00 were prepared by chemical co-precipitation method. X-ray diffraction results confirmed the formation of a single spinel ferrite structure with crystallite size in the range of 20–63 nm. Scanning electron microscopy and EDS were used to study the morphological and compositional changes taking place with varying Cu concentration. DC electrical resistivity, activation energy and drift mobility are strongly influenced by both Cu concentration and temperature. Resistivities of the prepared magnetic ceramics were found to decrease with the increase in Cu concentration to follow Verwey mechanism. The semiconductor behaviour of the prepared nanoparticles was confirmed from the standard Arrhenius relation of resistivity versus temperature. The dielectric constants were measured in the frequency range of 100 Hz–3·0 MHz and are explained by the Maxwell–Wagner interfacial type of polarisation.
GreenwoodNN, EarnshawA: ‘Chemistry of the elements’; 1984, Oxford, Pergamon Press Ltd.
3.
PantP, BhuvaneswariS, GhoshNN: ‘Chemical methodologies for preparation of micron and nanometer scale ferrites – a mini review of patents’, Recent Pat. Nanotechnol., 2008, 2, 8–18.
4.
KasapogluN, BaykalA, KoseoglubY, ToprakMS: ‘Microwave-assisted combustion synthesis of CoFe2O4 with urea, and its magnetic characterization’, Scr. Mater., 2007, 57, 441–444.
5.
BidS, PradhanSK: ‘Preparation of zinc ferrite by high-energy ball-milling and microstructure characterization by Rietveld's analysis’, Mater. Chem. Phys., 2003, 82, 27–37.
6.
MahmoudMH, HamdehHH, HoJC, O'SheaMJ, WalkerJC: ‘Mössbauer studies of manganese ferrite fine particles processed by ball-milling’, J. Magn. Magn. Mater., 2000, 220, 139–146.
7.
LeeSW, RyuYG, YangKJ, JungK.-D, AnSY, KimCS: ‘Magnetic properties of Zn2+ substituted ultrafine Co-ferrite grown by a sol–gel method’, J. Appl. Phys., 2002, 91, 7610–7612.
8.
CarpenterEE, O’ ConnorCJ, HarrisVG: ‘Atomic structure and magnetic properties of MnFe2O4 nanoparticles produced by reverse micelle synthesis’, J. Appl. Phys., 1999, 85, 5175–5177.
9.
ArulmuruganR, JeyadevanB, VaidyanathanG, SendhilnathanS: ‘Effect of zinc substitution on Co–Zn and Mn–Zn ferrite nanoparticles prepared by co-precipitation’, J. Magn. Magn. Mater., 2005, 288, 470–477.
10.
GeeSH, HongYK, EricksonDW, ParkMH, SurJC: ‘Synthesis and aging effect of spherical magnetite (Fe3O4) nanoparticles for biosensor applications’, J. Appl. Phys., 2003, 93, 7560–7562.
11.
GulIH, MaqsoodA: ‘Structural, magnetic and electrical properties of cobalt ferrites prepared by the sol–gel route’, J. Alloys Compd, 2008, 465, 227–231.
12.
GulIH, MaqsoodA, NaeemM, AshiqMA: ‘Optical, magnetic and electrical investigation of cobalt ferrite nanoparticles synthesized by co-precipitation route’, J. Alloys Compd, 2010, 507, 201–206.
13.
SrivastavaP, KapoorIPS, SinghG: ‘Nanoferrites: preparation, characterization and catalytic activity’, J. Alloys Compd, 2009, 485, 88–92.
14.
LiahiraP, SenguptaSK: ‘Spinel ferrites as catalysts: a study on catalytic effect of coprecipitated ferrites on hydrogen peroxide decomposition’, Can. J. Chem., 1991, 69, 33–36.
15.
MathewT, ShijuNR, SreekumarK, RaoBS, GopinathCS: ‘Cu–Co synergism in Cu1−xCoxFe2O4—catalysis and XPS aspects’, J. Catal., 2002, 210, 405–417.
16.
SaadiS, BougueliaA, TrariM: ‘Photoassisted hydrogen evolution over spinel CuM2O4 (M = Al, Cr, Mn, Fe and Co)’, Renewable Energy, 2006, 31, 2245–2256.
17.
SreekumarK, JyothiTM, MathewT, TalawarMB, SugunanS, RaoBS: ‘Selective N-methylation of aniline with dimethyl carbonate over Zn1−xCoxFe2O4 (x = 0, 0.2, 0.5, 0.8 and 1.0) type systems’, J. Mol. Catal. A, 2000, 159A, 327–334.
18.
VerweyEJW, HeilmannEL: ‘Physical properties and cation arrangements of oxides with spinel structures, I. Cation arrangements in spinels’, J. Chem. Phys., 1947, 15, 174–180.
ArulmuruganR, VaidyanathanG, SendhilnathanS, JeyadevanB: ‘Co–Zn ferrite nanoparticles for ferrofluid preparation: study on magnetic properties’, Physica B2005, 363B, 225–231.
21.
AhmedYMZ, HessienMM, RashadMM, IbrahimIA: ‘Nano-crystalline copper ferrites from secondary iron oxide (mill scale)’, J. Magn. Magn. Mater., 2009, 321, 181–187.
22.
ZinovikEV, ZinovikMA: Powder Metall. Met. Ceram., 2005, 44, 481–488.
GoldmanA: ‘Modern ferrite technology’, 2nd edn; 2005, New York, Springer.
25.
MisraRDK, KaleA, SrivatsavaRS, SenkovO: ‘Synthesis of nanocrystalline nickel and zinc ferrites by microemulsion technique’, Mater. Sci. Technol., 2003, 19, 826–830.
26.
ShultzMD, CalvinS, FatourosPP, MorrisonSA: ‘Enhanced ferrite nanoparticles as MRI contrast agents’, J. Magn. Magn. Mater., 2007, 311, 464–468.
27.
AshiqMN, SaleemS, MalanaMA, RehmanA.-U: ‘Physical, electrical and magnetic properties of nanocrystalline Zr–Ni doped Mn-ferrite synthesized by the co-precipitation method’, J. Alloys Compd, 2009, 486, 640–644.
28.
AjmalM, ShahNA, MaqsoodA, AwanMS, ArifM: ‘Influence of sintering time on the structural, electrical and magnetic properties of polycrystalline Cu0.6Zn0.4Fe2O4 ferrites’, J. Alloys Compd, 2010, 508, 226–232.
29.
SmitJ, WijinHPJ: ‘Ferrites’, 233; 1959, New York, Wiley.
30.
BarakatMM, HenaishMA, OlofaSA, TwafikA: ‘Sintering behaviour of the spinel ferrite system Ni0.65Zn0.35Fe2−xCuxO4’, J. Therm. Anal. Calorim., 1991, 37, 241–248.
DeyS, GhoseJ: ‘Synthesis and characterization and magnetic studies on nanocrystalline Co0.2Zn0.8Fe2O4’, Mater. Res. Bull., 2003, 38, 1653–1660.
33.
LvW.-Z, LiuB, LuoZ.-K, RenX.-Z, ZhangP.-X: ‘XRD studies on the nanosized copper ferrite powders synthesized by sonochemical method’, J. Alloys Compd, 2008, 465, 261–264.
34.
CullityBD: ‘Elements of X-ray diffraction’; 1956, Reading, MA,Addison-Wesley Pub. Co. Inc.
35.
DevanRS, KolekarYD, ChouguleBK: ‘Effect of cobalt substitution on the properties of nickel–copper ferrite’, J. Phys. Condens. Matter, 2006, 18, 9809–9821.
36.
AshrafizadehA, GhasemiA, PaesanoA, MachadoCFC, LiuaX, MorisakoA: ‘Structural and magnetic properties of CuxMg0.5−xZn0.5Fe2O4 (x = 0–0.5) particles’, J. Alloys Compd, 2010, 506, 279–284.
37.
El HitiMA: ‘DC conductivity for ZnxMg0.8−xNi0.2Fe2O4 ferrites’, J. Magn. Magn. Mater., 1994, 136, 138–142.
38.
IrvineJTS, HuanostaA, ValenzuelaR, WestAR: ‘Electrical properties of polycrystalline nickel–zinc ferrites’, J. Am. Ceram. Soc., 1990, 73, 729–732.
39.
BrabersAM: ‘Infrared spectra of cubic and tetragonal manganese ferrites’, Phys. Stat. Solidi, 1969, 33, 563–572.
40.
KavasH, BaykalA, ToprakMS, KoseogluY, SertkolM, AktasB: ‘Cation distribution and magnetic properties of Zn doped NiFe2O4 nanoparticles synthesized by PEG-assisted hydrothermal route’, J. Alloys Compd, 2009, 479, 49–55.
41.
HessienMM, RashadMM, El-BarawyK, IbrahimIA: ‘Influence of manganese substitution and annealing temperature on the formation, microstructure and magnetic properties of Mn–Zn ferrites’, J. Magn. Magn. Mater., 2008, 320, 1615–1621.
42.
MaxwellJC: ‘Electricity and magnetism’, Vol. 1, Section 328; 1929, Oxford, Oxford University Press.
43.
WagnerKW: ‘Zur Theorie der unvollkommenen Dielektrika’, Annalen der Physik, 1913, 40, 817–855.
44.
KoopsCG: ‘On the dispersion of resistivity and dielectric constant of some semiconductors at audiofrequencies’, Phys. Rev., 1951, 83, 121–124.
