Preparation of nanocrystalline ZrB2–based powder by aluminothermic and magnesiothermic reductions in M/ZrO2/B2O3 (M = Al or Mg) systems was investigated. In this research, high energy ball milling was employed to persuade necessary conditions for the occurrence of a mechanically induced self-sustaining reaction (MSR). The course of MSR reactions were recorded by a noticeable pressure rise in the system during milling. Ignition times for ZrB2 formation by aluminothermic and magnesiothermic reductions were found to be 13 and 6 min, respectively. Zirconium diboride formation mechanism in both systems was explained through the analysis of the relevant sub-reactions.
BalcO, AgaogullarD, DumanI, OvecogluML: ‘Carbothermal production of ZrB2–ZrO2 ceramic powders from ZrO2–B2O3/B system by high-energy ball milling and annealing assisted process’, Ceram. Int., 2012, 38, 2201–2207.
11.
ZhaoH, HeY, JinZ: ‘Preparation of zirconium boride powder’, J. Am. Ceram. Soc., 1995, 78, 2534–2536.
12.
SonberJK, MurthyTSRCh, SubramanianC, KumarS, FotedarRK, SuriAK: ‘Investigations on synthesis of ZrB2 and development of new composites with HfB2 and TiSi2’, Int. J. Refract. Met. H., 2011, 29, 21–30.
13.
GuoWM, ZhangGJ: ‘Reaction processes and characterization of ZrB2 powder prepared by boro/carbothermal reduction of ZrO2 in vacuum’, J. Am. Ceram. Soc., 2009, 92, 264–267.
NishiyamaK, NakamurT, UtsumiS, SakaiH, AbeM: ‘Preparation of ultrafine boride powders by metallothermic reduction method’, J. Phys. Conf. Ser., 2009, 176, 012043.
16.
SetoudehN, WelhamNJ: ‘Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg’, J. Alloy Compd., 2006, 420, 225–228.
17.
MishraSK, DasS, PathakLC: ‘Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis’, Mater. Sci. Eng., 2004, A364, 249–255.
18.
MishraSK, DasSK, SherbacovV: ‘Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: a novel approach’, Compos. Sci. Tech., 2007, 67, 2447–2453.
19.
LeeYB, ParkHC, OhKD, BowenCR, StevensR: ‘Self-propagating high-temperature synthesis of ZrB2 in the system ZrO2–B2O3–Fe2O3–Al’, J. Mater. Sci. Lett., 2000, 19, 469–471.
20.
AkgunB, CamurluHE, TopkayaY, SevincN: ‘Mechanochemical and volume combustion synthesis of ZrB2’, Int. J. Refract. Met. H., 2011, 29, 601–607.
GotorFJ, AchimovicovaM, RealC, BalazP: ‘Influence of the milling parameters on the mechanical work intensity in planetary mills’, Powder Tech., 2013, 233, 1–7.
23.
SarkarS: ‘The removal of alumina and silica from iron rejects slime by chemical leaching’, Hydrometallurgy, 2011, 105, 364–369.
24.
LiuJ, OwnbyPD: ‘Enhanced mechanical properties of alumina by dispersed titanium diboride particulate inclusions’, J. Am. Ceram. Soc., 1991, 74, 241–243.
