Densification is an exothermic process according to the classical sintering theories; however, it has never been explored experimentally. In the present work, such heat release was successfully detected from nanosized BaTiO3 nanopowder compact, which was rapidly consolidated by spark plasma sintering. A reduction of total power consumption was observed immediately when rapid densification occurred. The effects of the deviation of overall electric resistance on total power consumption were analysed. The temperature at which a falling inflection point of the power supply was observed can be used as an indicator of the minimum temperature required for densification. This would be of help for defining the ‘kinetic window’ for processing of nanoceramics in sintering practice.
ShawN. J.: ‘Densification and coarsening during solid-state sintering of ceramics—a review of the models. 2. Grain-growth’, Powder Metall. Int., 1989, 21, 31–33.
2.
ChaimR., MarderR., EstournésC. and ShenZ.: ‘Densification and preservation of ceramic nanocrystalline character by spark plasma sintering’, Adv. Appl. Ceram., 2012, 111, (5&6), 280–285.
3.
KimH. C., ShonI. J., GarayJ. E. and MunirZ. A.: ‘Consolidation and properties of binderless sub-micron tungsten carbide by field-activated sintering’, Int. J. Refract. Met. Hard Mater., 2004, 22, (6), 257–264.
4.
ShenZ. J., XiongY., HocheT., SalamonD., FuZ. Y. and BelovaL.: ‘Ordered coalescence of nanocrystals: a path to strong macroporous nanoceramics’, Nanotechnology, 2010, 21, (20), 1–5.
5.
HuJ. F. and ShenZ. J.: ‘Grain growth by multiple ordered coalescence of nano-crystals during spark plasma sintering of SrTiO3 nanopowders’, Acta Mater., 2012, 60, (18), 6405–6412.
6.
LiuJ., ShenZ. J., NygrenM., SuB. and ButtonT. W.: ‘Spark plasma sintering behavior of nano-sized (Ba,Sr)TiO3 powders: determination of sintering parameters yielding nanostructured ceramics’, J. Am. Ceram. Soc., 2006, 89, (9), 2689–2694.
7.
OmoriM.: ‘Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)’, Mater. Sci. Eng. A., 2000, A287, (2), 183–188.
8.
MunirZ. A., Anselmi-TamburiniU. and OhyanagiM.: ‘The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method’, J. Mater. Sci., 2006, 41, (3), 763–777.
9.
ShenZ. J., JohnssonM., ZhaoZ. and NygrenM.: ‘Spark plasma sintering of alumina’, J. Am. Ceram. Soc., 2002, 85, (8), 1921–1927.
10.
LinY.-S., MeyersM. A. and OlevskyE. A.: ‘Microchannelled hydroxyapatite components by sequential freeze drying and free pressureless spark plasma sintering’, Adv. Appl. Ceram., 2012, 111, (5&6), 269–274.
11.
TamariN., TanakaT., TanakaK., KondohI., KawaharaM. and TokitaM.: ‘Effect of spark plasma sintering on densification and mechanical properties of silicon-carbide’, J. Ceram. Soc. Jpn, 1995, 103, (1199), 740–742.
12.
VanmeenselK., LaptevA., HennickeJ., VleugelsJ. and Van der BiestO.: ‘Modelling of the temperature distribution during field assisted sintering’, Acta Mater., 2005, 53, (16), 4379–4388.
13.
ErikssonM., LiuY., HuJ. F., GaoL., NygrenM. and ShenZ. J.: ‘Transparent hydroxyapatite ceramics with nanograin structure prepared by high pressure spark plasma sintering at the minimized sintering temperature’, J. Eur. Ceram. Soc., 2011, 31, (9), 1533–1540.
14.
YoonS., DornseifferJ., XiongY., GrunerD., ShenZ. J. and IwayaS.: ‘Spark plasma sintering of nanocrystalline BaTiO3-powders: consolidation behavior and dielectric characteristics’, J. Eur. Ceram. Soc., 2011, 31, (9), 1723–1731.
15.
SalamonD., ErikssonM., NygrenM. and ShenZ.: ‘Homogeneous TiB2 ceramics achieved by electric current-assisted self-propagating reaction sintering’, J. Am. Ceram. Soc., 2007, 90, (10), 3303–3306.
16.
WakaiF.: ‘Modeling and simulation of elementary processes in ideal sintering’, J. Am. Ceram. Soc., 2006, 89, (5), 1471–1484.
OlevskyE. A. and FroyenL.: ‘Impact of thermal diffusion on densification during SPS’, J. Am. Ceram. Soc., 2009, 92, (s1), S122–S132.
20.
PappacenaK. E., FaberwK. T., WangH. and PorterW. D.: ‘Thermal conductivity of porous silicon carbide derived from wood precursors’, J. Am. Ceram. Soc., 2007, 90, (9), 2855–2862.
21.
VanmeenselK., HuangS. G., LaptevA., SalehiS. A., SwarnakarA. K., Van der BiestO. and VleugelsJ.: ‘Pulsed electric current sintering of electrically conductive ceramics’, J. Mater. Sci., 2008, 43, (19), 6435–6440.
22.
ZhangD. M., FuZ. Y., YuanR. Z. and GuoJ. K.: ‘Equivalent resistance in pulse electric current sintering’, J. Wuhan Univ. Technol.-Mater. Sci. Ed., 2002, 17, (2), 30–32.
23.
OlevskyE. A., CardonaC. G., BradburyW. L., HainesC. D., MartinD. G. and KapoorD.: ‘Fundamental aspects of spark plasma sintering: II. Finite element analysis of scalability’, J. Am. Ceram. Soc., 2012, 95, (8), 2414–2422.
