Low friction silicon carbide (SiC) ceramic seals were prepared by combining liquid phase sintering (LPS) with pore creation, the effects of polyethylene oxide (PEO) as pore former on the sintering and mechanical properties, microstructure, and friction properties of LPS–SiC ceramic seals were investigated. The PEO firstly forms cross-linking aggregates with loose structure in SiC granules, which uniformly creates macropores on the surface and inside of LPS–SiC ceramic seals during the sintering. The addition of PEO decreases the sintering and mechanical properties of LPS–SiC ceramic seals obviously, while significantly reduces the dry friction coefficient of LPS–SiC ceramic seals. When the PEO content increases from 0 to 15 wt-%, the dry friction coefficient drops from 0·403 to 0·126. The pore creation of PEO improves the friction performances of SiC ceramic seals in sliding wear applications.
ChenD, SixtaME, ZhangXF, De JoungheLC and RitchieRO: ‘Role of the grain-boundary phase on the elevated-temperature strength, toughness, fatigue and creep resistance of silicon carbide sintered with Al, B and C’, Acta Mater., 2000, 48, 4599–4608.
2.
van DijenFK and MayerE: ‘Liquid phase sintering of silicon carbide’, J. Eur. Ceram. Soc., 1996, 16, 413–420.
3.
MagnaiG, BeltramiG, MinoccariGL and PilottiL: ‘Pressureless sintering and properties of αSiC-B4C composite’, J. Eur. Ceram. Soc., 2001, 21, 633–638.
4.
LeeSK, IshidaW, LeeSY, NamKW and AndoK: ‘Crack-healing behavior and resultant strength properties of silicon carbide ceramic’, J. Eur. Ceram. Soc., 2005, 25, 569–576.
5.
JungE, AhnJP, LeeYJ, GuoX, CaiX, HuangY, ZhangL, YangH: ‘Synthesis of beta-SiC powder from alkoxide precursor and study of its sintering behaviour’, Adv. Appl. Ceram., 2012, 111, 502–507.
6.
ZhangLJ, YangH, GuoXZ, ShenJC and ZhuXY: ‘Preparation and properties of silicon carbide ceramics enhanced by TiN nanoparticles and SiC whiskers’, Scr. Mater., 2011, 65, 186–189.
7.
ChoSJ, UmCD and KimSS: ‘Wear and wear transition in silicon carbide ceramics during sliding’, J. Am. Ceram. Soc., 1996, 79, 1247–1251.
8.
Borrero-LópezO, OrtizAL and GuiberteauF: ‘Effect of microstructure on sliding-wear properties of liquid-phase-sintered α-SiC’, J. Am. Ceram. Soc., 2005, 88, 2159–2163.
9.
DongX, JahanmirS and IvesLK: ‘Wear transition diagram for silicon carbide’, Tribol. Int., 1995, 28, 559–572.
10.
SangKZ, LüZ.L. and JinZH: ‘A study of the SiC-L composite ceramics for self-lubrication’, Wear, 2002, 253, 1188–1193.
11.
Zum GahrKH, BlattnerR, HwangDH and PöhlmannK: ‚Micro- and macro-tribological properties of SiC ceramics in sliding contact’, Wear, 2001, 250, 299–310.
12.
GuoXZ, CaiXB, ZhangLJ, GuoX, CaiX, HuangY, ZhangL, YangH: ‘Sintering, properties and microstructure of low friction SiC ceramic seals containing graphite fluoride’, Adv. Appl. Ceram., 2013, 112, 341–344.
13.
ChenM, KatoK and AdachiK: ‘Friction and wear of self-mated SiC and Si3N4 sliding in water‘, Wear, 2001, 250, 246–255.
14.
YuXQ, HeS and CaiRL: ‘Frictional characteristics of mechanical seals with a laser-textured seal face’, J. Mater. Process. Technol., 2002, 129, 463–466.
15.
JiangZY, LiuXH and BuJL: ‘Numerical analysis on tribological properties of mechanical seals with a laser-textured face’, Adv. Mater. Res., 2011, 154–155, 1266–1270.
16.
GaoJ: ‘Mechanical seal face texturing by the acousto-optic q-switched pulsed Nd:YAG laser’, Adv. Mater. Res., 2011, 314–316, 1948–1954.
17.
DeyA, KayalN and ChakrabartiO: ‘Preparation of mullite bonded porous SiC ceramics by an infiltration method’, J. Mater. Sci., 2011, 46, 5432–5438.
18.
EomJH and KimYW: ‘Effect of additives on mechanical properties of macroporous silicon carbide ceramics’, Met. Mater. Int., 2010, 16, 399–405.
19.
KimYW, JinYJ, EomJH, SongIH and KimHD: ‘Engineering porosity in silicon carbide ceramics’, J. Mater. Sci., 2010, 45, 2808–2815.
20.
EomJH and KimYW: ‘Effect of template size on microstructure and strength of porous silicon carbide ceramics’, J. Ceram. Soc. Jpn, 2008, 116, 1159–1163.
21.
MatsudaM, KatoK and HashimotoA: ‘Friction and wear properties of silicon carbide in water from different sources’, Tribol. Lett., 2011, 43, 33–41.
22.
SongIH, KwonIM, KimHD and KimYW: ‘Processing of microcellular silicon carbide ceramics with a duplex pore structure’, J. Eur. Ceram. Soc., 2010, 30, 2671–2676.
23.
CuiWG, JiangDL, HuangZR and TanSH: ‘Investigation of preparation and sintering of SiC porous ceramics’, Acta Chim. Sinica, 2003, 61, 2002–2007.
24.
GuoXZ, YangH, HuangYY and ZhangLJ: ‘Microstructure and properties of pore-created SiC ceramics with calcium chloride as pore former’, Ceram. Int., 2013, 39, 1299–1305.
25.
GuoXZ, YangH, ZhuXY, ZhuL and ZhangLJ: ‘Rheological properties and spray-drying behaviors of nano-SiC based aqueous slurry’, Mech. Mater., 2012, 46, 11–15.
26.
GuoXZ, LiHM, ZhuXY, YangH, FuPX and GaoHL: ‘Characteristics of SiC/nano-TiN aqueous mixed slurry and its spray drying behavior’, J. Inorg. Mater. (China), 2008, 23, 1211–1215.
27.
GuoXZ, ZhuXY, ZhangLJ, YangH, FuPX and GaoLH: ‘Pressureless sintering of silicon carbide nanocomposite ceramics’, J. Chin. Ceram. Soc., 2010, 38, 258–264.
