Autonomous piezoelectric structural health monitoring system for on-production line use

Abstract

The aim of this study is to control aeronautical composite structures on production line since they are extremely vulnerable to impact damages due to tool drops for example. To detect such an event on the structure, a piezoelectric wireless sensor network has to be developed. Therefore the feasibility of an innovative technique based on a piezoelectric harvesting device is presented. The system carries out structural health monitoring tasks using piezoelectric transducers bonded onto the structure and is also fully autonomous since the same transducers are used to convert the mechanical vibrations of the structure into electrical power. As vibrations are not available during the production process, the autonomy of the system is provided thanks to a Lamb wave emitter located in the sensor array. After measurements, the system is able to harvest 7·36 milli-watts for a 100 milli-watts mechanical power applied to the structure. This electrical power can be used both by the electronic detector and the WIFI transmitter for the detection of impacts of less than 1 Joule.

Keywords

Structural health monitoring Piezoelectric power harvesting Impact detection Piezoelectric ceramic

Get full access to this article

View all access options for this article.

References

Paget

, Tiplady

, Kluge

, Becker

and Schalk

: ‘Feasibility study on wireless impact damage assessment system for thick aeronautical composites’, Proc. 5th Eur. Workshop on ‘Structural health monitoring’; 2010, DEStech Publications, Inc, Lancaster, PA, USA.

Viktorov

: ‘Rayleigh and Lamb waves: physical theory and applications’; 1970, New York, Plenum Press.

Mathuna

, O'Donnell

, Martinez-Catala

, Rohan

and O'Flynn

: ‘Energy scavenging for long-term deployable wireless sensor networks’, Talenta, 2007, 75, (3), 613–623.

Harb

: ‘Energy harvesting: State-of-the-art’, Renew. Energy, 2011, 36, (10), 2641–2654.

Park

, Farrar

, Todd

, Hodgkiss

and Rosing

: ‘Energy harvesting for structural health monitoring sensor networks’, LA-14314-MS, Los Alamos Laboratory, Los Alamos, NM, USA, 2007.

Samson

, Kluge

, Becker

and Schmid

: ‘Energy harvesting for Autonomous Wireless Sensor Nodes in Aircraft’, Proc. Eng., 2010, 5, 1160–1163.

Roundy

, Wright

and Rabaey

: ‘A study of low level vibrations as a power source for wireless sensor nodes’, Comput. Commun., 2003, 26, (11), 1131–1144.

Ferrari

, Ferrari

, Guizzetti

, Marioli

and Taroni

: ‘Piezoelectric multi-frequency energy converter for power harvesting in autonomous microsystems’, Sens. Actuators A: Phys., 2008, 142A, (1), 329–335.

Lefeuvre

, Badel

, Richard

, Petit

and Guyomar

: ‘A comparison between several vibration-powered piezoelectric generators for standalone systems’, Sens. Actuators A: Phys., 2006, 126A, (2), 405–416.

10.

Paget

, Sainthuile

, Delebarre

and Grondel

: ‘Wireless power transmission’, Patent US 20130236038 A1, 2013.

11.

Grondel

, Paget

C.A.

, Delebarre

, Assaad

and Levin

. ‘Design of optimal configuration for generating A0 Lamb mode in a composite plate using piezoceramic transducers’. J. Acoust. Soc. Am., 2002, 112, (1), 84–90.

12.

Delebarre

, Sainthuile

, Grondel

and Paget

: ‘Power harvesting capabilities of SHM ultrasonic sensors’, Smart Mater. Res., 2012, 2012, 387638.

13.

Sainthuile

, Grondel

, Delebarre

, Godts

and Paget

: ‘Energy harvesting process modelling of an aeronautical structural health monitoring system using a bond-graph approach’, Int. J. Aerosp. Sci., 2012, 1, (5), 107–115.