High density bulk zirconium diboride was successfully produced by pressureless sintering with the Ni additive as sintering aid. Microstructure and phase formation were investigated by using scanning electron microscopy and X-ray diffractometry respectively. Microhardness, fracture toughness and compressive strength of the sintered samples were measured. Results showed that the higher Ni content led to higher densification, fracture toughness and hardness and lower compressive strength. A significant grain growth was observed during sintering at 2000°C, which may be due to the oxygen impurity in the surface of particles. The addition of 1 wt-%C led to oxygen removing and smaller grains after sintering.
LowI. M. and McphersonR.: ‘Fabrication of new zirconium deboride ceramics’, J. Mater. Sci. Lett., 1989, 8, 1281–1283.
7.
UpadhyaK., YangJ. and HoffmanW.: ‘Materials for ultra high temperature structural applications’, Am. Ceram. Soc. Bull., 1997, 76, (12), 51–56.
8.
GaschM. J., EllerbyD. T. and JohnsonS. M.: ‘Ultra high temperature ceramic composites’, in ‘Handbook of ceramic composites’, (ed. BansalN. P.., 197–226; 2005, Boston, MA, Kluwer Academic Pubilsher.
9.
TelleR., SiglL. S. and TakagiK.: ‘Boride-Based hard materials’, in ‘Handbook of ceramic hard materials’, (ed. RiedelR.), Vol. 2, 802–945; 2000, Weinheim, Germany, Wiley-VCH.
10.
FahrenholtzW. G., HilmasG. E., TalmyI. G. and ZaykoskiJ. A.: ‘Refractory diborides of zirconium and hafnium’, J. Am. Ceram. Soc., 2007, 90, (5), 1347–1364.
11.
OpekaM. M., TalmyI. G. and ZaykoskiJ. A.: ‘Oxidation-based materials selection for 2000°C+hypersonic aerosurfaces: theoretical considerations and historical experience’, J. Mater. Sci., 2004, 39, (19), 887–904.
12.
GuoSh. Q.: ‘Densification of ZrB2-based composites and their mechanical and physical properties’, J. Eur. Ceram. Soc., 2009, 29, 995–1011.
13.
ZhuS., FahrenholtzW. G., HilmasG. E. and ZhangS. C.: ‘Pressureless sintering of Carbon-Coated zirconium diboride powders’, Mater. Sci. Eng. A, 2007, A459, 167–171.
14.
MonteverdeF., BellosiA. and GuicciardiS.: ‘Processing and properties of zirconium diboride-based composites’, J. Eur. Ceram. Soc., 2002, 22, (3), 279–288.
15.
Melendez-MartinezJ. J., Dominguez-RodriquezA., MonteverdeF., MelandriC. and de PortuG.: ‘Characterisation and high temperature mechanical properties of zirconium boride-based materials’, J. Eur. Ceram. Soc., 2002, 22, 2543–2549.
16.
EinarsrudM. A., HagenE., PettersenG. and GrandeT.: ‘Pressureless sintering of titanium diboride with nickel, nickel boride, and iron additives’, J. Am. Ceram. Soc., 1997, 80, (12), 3013–3020.
17.
TelleR. and PetzowG.: ‘Strengthening and toughening of Boride and Carbide hard material composites’, Mater. Sci. Eng. A, 1988, A105/A106, 97–104.
18.
ChamberlainA. L., FahrenholtzW. G. and HilmasG. E.: ‘Reactive hot pressing of zirconium diboride’, J. Eur. Ceram. Soc., 2009, 29, 3401–3408.
19.
KisluiP. S. and KuzenkovaA. M.: ‘Regularities of sintering of zirconium diboride-molybdenum alloys’, Sov. Powder Metall. Met. Ceram., 1966, 5, 360–365.
20.
CechB., OliveriusP. and SejbalJ.: ‘Sintering of zirconium diboride with activating additions’, Powder Metall., 1965, 8, (15), 142–151.
21.
KisliyP. S., KuzenkovaM. A. and ZaveruhaO. V.: ‘On the sintering process of zirconium diboride with tungsten’, Phys. Sint., 1971, 3, (1), 29–44.
22.
SpeyerR. F. and LeeH.: ‘Advances in pressureless sintering of boron carbide’, J. Mater. Sci., 2004, 39, (19), 6017–6021.
23.
ScitiD., BrachM. and BellosiA.: ‘Oxidation behavior of a pressureless sintered ZrB2-MoSi2 ceramic composites’, J. Mater. Res., 2005, 20, (4), 922–930.
24.
ScitiD., GuicciardiS., BellosiA. and PezzottiG.: ‘Properties of a pressureless-sintered ZrB2-MoSi2 ceramic composite’, J. Am. Soc., 2006, 89, (7), 2320–2322.
25.
ZhuS., FahrenholtzW. G. and HilmasG. E.: ‘Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride-silicon carbide ceramics’, J. Eur. Ceram. Soc., 2007, 27, 2077–2083.
26.
PadovanoE., BadiniC., BiaminoS., et al.: ‘Pressureless sintering of ZrB2-SiC composite laminates using boron and carbon as sintering aids’, Adv. Appl. Ceram., 2013, 112, 478–486.
27.
MonteverdeF. and BellosiA.: ‘Effect of the addition of silicon nitride on sintering behavior and microstructure of zirconium diboride’, Scr. Mater., 2002, 46, 223–228.
28.
SonberJ. K., MurthyT. S. R. Ch. and SubramanianC.: ‘Effect of WSi2 addition on densification and properties of ZrB2’, Adv. Appl. Ceram., 2014, 113, 114–119.
29.
ZhuS., FahrenholtzW. G., HilmasG. E. and ZhangS. C.: ‘Pressureless sintering of zirconium diboride using boron carbide and carbon additions’, J. Am. Ceram. Soc., 2007, 90, (11), 3660–3663.
30.
FahrenholtzW. G., HilmansG. E., ZhangS. C. and ZhuS.: ‘Pressureless sintering of zirconium diboride: particle size and additive effects’, J. Am. Ceram. Soc., 2008, 91, (5), 1398–1404.
31.
ChamberlainA. L., FahrenholtzW. G. and HilmasG. E.: ‘Pressureless sintering of zirconium diboride’, J. Am. Ceram. Soc., 2006, 89, (2), 450–456.
32.
RanS., BiestO. V. and VleugelsJ.: ‘ZrB2 powders synthesis by borothermal reduction’, J. Am. Ceram. Soc., 2010, 93, (6), 1586–1590.
33.
RicoJ. R., BoutistaM. A., FernandezJ. M. and SinghM.: ‘Compressive strength degradation in ZrB2-based ultra-high temperature ceramic composites’, J. Eur. Ceram. Soc., 2011, 31, 1345–1352.
