Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites

In the current study, the possibility of replacing woven glass fibres (WGFs) with seed oil palm fibres (SOPFs) as reinforcements for tribopolymeric composites is investigated. Mainly, two different polyester composites based on woven glass reinforced polyester (WGRP) and seed oil palm reinforced polyester (SOPRP) are developed. Different volume fractions (25, 35, and 45 vol.-%) of SOPFs were considered. The experiments were performed using a block on disc (BOD) machine and the tests were conducted under dry contact condition against smooth stainless steel counterface at 2˙8 m s^–1 sliding velocity, 20 N applied load for different sliding distances (up to 5 km). The wear mechanism was categorised using a Scanning Electron Microscope (SEM). The results revealed that the steady state was reached after 4 km sliding distance for both WGRP and SOPRP composites. Seed oil palm reinforced polyester composites showed very high friction coefficient compared to WGRP. 35 vol.-% SOPRP composite exhibited a promising wear result, i.e. SOPFs are possible to replace WGFs in polymeric composites reinforcements whereas the wear resistance of the synthetic and natural composite were almost the same. The wear mechanisms for SOPRP composites were predominated by microcracks, deformation and pulledout of fibres while in the WGRP composite, abrasive nature was observed.