Kiln Drying Canadian Softwoods and Hardwoods: Different Species

Abstract

A mail survey on kiln drying problems faced by Canadian companies processing softwood and/or hardwood timbers revealed important differences in drying methodologies, and dried product quality. Two significant differences in the drying process were identified related to electrical energy consumption and spraying systems, but none in kiln control. For kiln drying problems, softwood mills preferred the assistance of kiln manufacturers, while operations drying hardwoods or both softwoods and hardwoods more frequently consulted research institutes. Dried product quality problems were more crucial to mills that only dried hardwoods. Results of this research could provide companies with a better understanding of their sector, point out possible opportunities for increasing the profitability and stability of the wood products industry, as well as assist in focusing research efforts.

Keywords

KILN DRYING SOFTWOODS HARDWOODS DRYING PROCESS DRYING DEFECTS

Get full access to this article

View all access options for this article.

References

ALEXIADIS

, COHEN

D. H.

, KOZAK

R. A.

, AVRAMIDIS

and WELLING

. 2005. Canadian

Kiln Drying Survey: Benchmarks of problems and issues and a comparison to Europe. Journal of the Institute of Wood Science (in press).

Canada's National Forest Inventory (CANFI) . 2004. Canfi Quick Facts. Retrieved February 18, 2005 from http://nacfs.nrcan.gc.ca/canfi/facts_e.html

DILLMAN

D. A

. 2000. Mail and Internet Surveys: The Tailored Design Method, 2nd ed. John Wiley & Sons, Inc., New York.

HAQUE

M. N.

, RILEY

S. G.

, LANGRISH

T. A. G.

and PANG

2005. Model Predicted Effects of Process Variables on Kiln Drying of Pinus Radiata Boards. In: Lianbai

, Shouyue

and Tao

(Eds.) 9th International IUFRO Wood Drying Conference Proceedings. Quality Control and Energy Saving in Wood Drying, August 21–26, 2005. Nanjing, China, pp 115–120.

HAYGREEN

J. G.

and BOWYER

J. L

. 1996. Forest Products and Wood Science: An Introduction, 3rd ed. Iowa State University Press, Ames.

KOZAK

R. A.

, MANESS

T. C.

and CALDECOTT

. 2003. Solid wood supply impediments for secondary wood producers in British Columbia. The Forestry Chronicle. 79(6), pp 1107–1120.

LAMB

F. M

. 1990. Reducing stresses and moisture content variation when drying hardwood lumber. In: Hamel

M. P.

(Ed.), Drying Softwood and Hardwood Lumber for Quality and Profit. Conference held in Charlotte, North Carolina, October 15–17, 1986. Forest Products Research Society, Madison, WI, pp 76–78.

MILOTA

M. R.

and SMITH

W. B

. 1994. Contrasting Drying Practices For Hardwoods and Softwoods. In: Drycon: Wood Technology's Drying Management Conference, December 9–10, 1994. Vancouver, B.C., pp 1–4.

10.

OLIVEIRA

L. C

. 1995. Drying Rates of SPF Lumber. Forintek Canada Corp. Technical Report No. 1212K039, Vancouver, B.C.

11.

OLIVEIRA

L. C

. 2003. Drying Sorted Spruce-Pine-Fir (spf) Lumber. In: Proceedings of the 8^th International IUFRO Wood Drying Conference, August 24–29, 2003, Transilvania University of Brasov, Romania, pp 178–184.

12.

WARD

J. C

and SIMPSON

W. T

. 1997. Drying Defects. In: Simpson

W.T.

(Ed.), Dry kiln operator's manual. Reprinted from U.S.D.A. Agricultural Handbook No. 188, Madison, WI, pp 179–205.

13.

ZAR

J. H

. 1999. Biostatistical Analysis, 4th edition. Prentice Hall, Upper Saddle River, NJ.

Kiln Drying Canadian Softwoods and Hardwoods: Different Species – Different Problems

Abstract

Keywords

Get full access to this article

References