Stress-Strain Response of Wood Under Radial Compression. Part 3

Abstract

As most wood-based composite products are made by compressing wood in the transverse direction, usually at elevated temperature, stress-strain response of wood under this stressing mode has a great influence not only on the design of the manufacturing process, but also on the end product properties. This paper describes a study to develop a mechanics-based method of predicting the complete stress-strain response of wood under radial compression, based on material properties of the cell wall and the dimensions of the cellular structure. The basis of the method is two previously developed micro-mechanical models for predicting gross elastic modulus and yield stress of wood under radial compression. Verification tests were conducted using white spruce specimens. It is demonstrated that using these two models, the entire stress-strain response encompassing the elastic, plastic and densification regions can be predicted with good accuracy.

Keywords

RADIAL COMPRESSION STRESS-STRAIN MICRO-MECHANICAL MODEL CELLULAR THEORY COMPACTION YIELD STRESS ELASTIC MODULUS

Get full access to this article

View all access options for this article.

References

BODIG

. 1963. A study of the mechanical behaviour of wood in transverse compression. Ph.D thesis. University of Washington, Seattle, Washington, USA.

DAI

, and STEINER

P. R

. 1993. Spatial structure of wood composites in relation to processing and performance characteristics. Part 1 Rationale for model development. Wood Science and Technology, 28: 45–51..

GIBSON

L. J.

, and ASHBY

M. F

. 1982. The mechanics of two-dimensional cellular materials. Proc. R. Soc. Lond., A 382: 25-42 DINVVOODIE, J. M. 1981. Timber, its nature and behaviour. Van Nostrand, New York, N.Y,

KENNEDY

R. W

. 1968. Wood in transverse compression. Forest. Prod. J., 18(3)36–40.

Kunesh

R. H

. 1968. Properties of wood in transverse compression. Forest. Prod. J., 18(1):65–72.

MAITI

S. K.

, GIBSON

L. J.

and ASHBY

M. F

. 1984. Deformation and energy absorption diagrams for cellular solids. Acta Metall, 32(11):1963–1975.

PANSHIN

A. J.

and DE ZEEUVV

1980. Textbook of wood technology : structure, identification, properties, and uses of the commercial woods of the United States and Canada. McGraw-Hill Book Co., New York, N.Y.

PERSSON

. 1997. Modelling of wood properties by a microscopic approach. Report TVSM-3020. Lund University, Lund, Sweden.

STEFANS SON

1995. Mechanical properties of wood at microstructure level. Report TVSM-5057, Lund Institute of Technology, Lund, Sweden.

10.

TABARSA

and CHUI

Y. H

. 1999. Microscopic observation of wood behaviour in radial compressing. Proceedings of the Forth International Conference on the Development of Wood science, Wood Technology and Forestry. Chilterns University College, Buckinghamshire, England. pp. 463–470.

11.

TABARSA

and CHUI

Y. H

. 2000. Stress-strain response of wood under radial compression. Part 1. Test Method and influences of cellular properties. Wood and Fiber Science, 32(2): 144–152

12.

TABARSA

and CHUI

Y. H

. 2001. Characterizing microscopic behavior of wood under transverse compression - Part 2: effect of species and loading direction. Wood and Fiber Science, 33(2): 223–232.

13.

WIMMER

., LUCAS

B. N.

, TSUI

T. Y.

and OLIVER

W. C.

1997. Longitudinal hardness and Young's modulus of spruce tracheid secondary walls using indentation technique. Wood Science and Technology, 31: 131–141

14.

WOLCOTT

M. P

., KAMKE

F. A.

, and. DILLARD

D. A.

1994. Fundamentals of flakeboard manufacture: Viscoelastic behaviour of the wood component. Wood and Fiber Science, 22 (4) :345–361.

Stress-Strain Response of Wood Under Radial Compression. Part 3 - Prediction Using Cellular Theory

Abstract

Keywords

Get full access to this article

References