Human interface and vibration control of robotic manipulator suspended from ceiling

Abstract

A robotic manipulator, suspended from a ceiling of a general house, with an easily operated human interface and vibration-reduction control of a suspended hand, is proposed in this paper. A bedridden user can easily manipulate his/her belongings by using the robotic manipulator. The human interface is a laser pointer. When a bedridden user wishes to pick up a target object, the user exposes the target object to the laser beam spot by manipulating a joystick lever. Then, the user pushes a switch on the joystick lever. After this simple operation, the robotic hand moves automatically to the target object following a laser beam trajectory, and the user can capture the object. The robotic manipulator used in our research does not require ‘oor installation on a ‘oor because it is installed on the ceiling of a house. Two linear motion actuators are fixed on the ceiling, and the carriage is moved horizontally. The robotic hand is suspended from the carriage. An active vibration-reduction control system is designed to decrease the suspended hand vibrations. The swings of the suspended hand are detected by a hand-swing detection system using a laser position sensor. The validity of the proposed robotic manipulator has been confirmed by the experimental and simulation results.

Keywords

human interface laser pointer robotic manipulator trajectory following vibration control

Get full access to this article

View all access options for this article.

References

Doyle, J. C. , Glover, K. , Khargonekar, P. and Francis, B. 1989: State space solutions to H2 and H control problems. IEEE Transactions on Automatic Control AC-34, 831-831.

Furuta, K. , Kawaji, S. , Mita, T. and Hara, S. 1984: Mechanical system seigyo (Control of mechanical system). Ohmsha, Japan

Hashino, S. 1996: Daily life support robot. Journal of the Robotics Society of Japan 14, 614-618.

Ifukube, T. 1993: Human interface technology required for supporting devices of the elderly. Journal of the Robotics Society of Japan 11, 633-638.

Sato, T. 1997: Ubiquitous robotic system. Journal of the Robotics Society of Japan 15, 496-500.

Takahashi, Y. and Hayase, M. 1996: Design of H controller for precise positioning and comparison with PID control. Transactions of The Institute of Measurement and Control 18, 175-182.

Takahashi, Y. and Takahashi, A. 1989: A direct linear drive system with a laser interferometer and digital state variable feedback control. Transactions of The Institute of Measurement and Control 11, 155-162.

Takahashi, Y. and Uchida, N. 1990: A scheme for reducing vibration during precise positioning control. Review of Scientific Instruments 61, 3883-3889.

Tanaka, Y. , Ueta, T. , Kawakami, H. and Sumitomo, T. 1994: A robotic truck crane with vibration sensors. Proceedings of the Japan-France Congress on Mechatronics, 731-736.