Diagnostic information on gearbox condition for mechatronic systems

Abstract

To maintain mechatronic systems, operational current diagnostic information on gearing condition is needed. Diagnostic information on gearbox condition can be gained from vibration signals. To extract suitable information from the signal we need to know the relation between factors influencing the diagnostic signal and the gearbox condition. There are several factors that have influence on diagnostic signals and these may be divided into four groups: design (DF), production technology (PTF) operational (OF) and change of condition (CCF). To gain information from the vibration signal, many experiments have to be carried out. Because many factors influence the vibration signal, the experiments on real objects are very expensive. To reduce the cost, mathematical modelling and computer simulation may be used. Papers devoted to mathematical modelling and computer simulation are concentrated on one-stage gearboxes. In this research work, a system that consists of a driving motor, coupling, double-stage gearbox and driven machine is considered. Using the model, it is possible to investigate the above-mentioned factors that influence the vibration signal. Faults occur during a gearbox operation. Gearing faults may be divided into single faults (a crack in a tooth or its breakage) and distributed faults caused by gearing wear (pitting, scuffing, abrasion and erosion). The methods of fault detection using signal analysis is given in this paper. The paper shows how mathematical modelling and computer simulations help signal interpretation, taken from real measurements. Frequency, time and time-frequency analysis are used for signal interpretation. As a result, we obtain spectra, cepstra and time-frequency spectrograms. The paper refers to the condition monitoring method, which used simple wide-band signal estimators. The method may be easily adopted for use in monitoring the online gearbox condition in mechatronics systems, whereas an advanced signal interpretation may be used for offline condition monitoring.

Keywords

computer simulation condition monitoring diagnostics gearbox

Get full access to this article

View all access options for this article.

References

Bartelmus, W. 1992: Vibration condition monitoring of gearboxes. Machine Vibration 1. London: Springer-Verlag, 178-189.

and in International Journal of Rotating Machinery 5, 203-218.

Bartelmus, W. 2000: Mathematical modelling of gearbox vibration for fault detection. Condition Monitoring & Diagnostic Engineering Management 3, 961-970.

Bartelmus, W. 2001: Mathematical modelling and computer simulations as an aid to gear-box diagnostics. Mechanical Systems and Signal Processing 15, 855-871.

Chen, J. and Patton, R. J. 1999: Robust model-based fault diagnosis in dynamic systems. Dordrecht: Kluwer Academic.

Koriath, H. J. and Romer, M. 2000: Mechatronics. Theory and applications. Ditzingen: OMEGON.

Patton, R. J. , Frank, P. M. and Clack, R. N. 2000: Issues of fault diagnosis for dynamic systems. Berlin: Springer.

Penter, A. J. A. 1991: Practical diagnostic monitoring system. Proceedings of an International Conference on Condition Monitoring, Erding, Germany. Swansea: Pineridge Press, 79-96.

Rettig, H. 1977: Gearbox inner dynamic overload (in German). Antriebstechnik 16, 655-663.

10.

Zimroz, R. 2002: Diagnostic method for belt conveyor transmissions with multistage gearboxes by using modelling. PhD thesis, Wroclaw University of Technology, Poland.