After outlining introductory research on a proposed reinforcing system for adobe housing using straps cut from used car tires, the paper reports on full-scale tests. One dynamic and two static tests are described and results presented. The most significant outcome was that a single-room adobe house reinforced by tire straps successfully withstood the strong shaking that routinely collapses unreinforced adobe dwellings. The reinforced house strength, as measured during the shaking, exceeded the requirements of the Peruvian seismic code. This type of reinforced adobe can undergo large horizontal deformations without collapse. Design, construction, economic, and cultural issues are discussed prior to concluding that the proposed system can prevent collapse of adobe houses during damaging earthquakes.
Get full access to this article
View all access options for this article.
References
1.
AdhikaryA., and MukhopadhyayR., 2004. Ozone attack and tire sidewall protection, Rubber World, Sept. 16–20, Lippincott & Peto, Inc., Akron, OH, 15 pp.
2.
BauerD. R., BaldwinJ. M., and EllwoodK. R., 2005. Correlation of rubber properties between field aged tires and laboratory aged tires, Rubber Chemistry and Technology78, 777–792.
3.
BlondetM., Villa-GarciaG. V., and BrzevS., 2003. Earthquake-resistant construction of adobe buildings: a tutorial, World Housing Encyclopedia, www.world-housing.net.
4.
CharlesonA. W., and FrenchM. A., 2005. Improving seismic safety of adobe construction with used car-tire straps: preliminary investigations, Proceedings of the Conference of the NZ Society for Earthquake Engineering, 11–13 March, Paper 32.
5.
CharlesonA. W., 2006. Low-cost tension resistance to improve seismic safety of adobe construction: strips cut from used car tires, Proceedings of the 8th U.S. National Conference on Earthquake Engineering, April 18–22, San Francisco, California.
6.
CharlesonA. W., and FrenchM. A., 2008. Used car tires as seismic reinforcement for adobe houses, Proceedings of the 14th World Conference on Earthquake Engineering, October 12–17, Beijing, China.
7.
CrockerE., 2000. Earthen architecture and seismic codes: lessons from the field, Proceedings of the UNESCO, ICOMOS and Turkish Ministry of Culture, International Conference on the Seismic Performance of Traditional Buildings, November 16–18, Istanbul, Turkey.
8.
Earthquake Engineering Research Institute (EERI), 2007. The Pisco, Peru, Earthquake of August 15, 2007, EERI Special Report, Oakland, CA.
9.
International Association for Earthquake Engineering (IAEE), 2004. Guidelines for earthquake resistant non-engineered construction, Revised edition of Basic Concept of Seismic Codes, Volume 1, Part 2, 1980, International Association for Earthquake Engineering, Tokyo, reprinted by the National Information Centre of Earthquake Engineering, Kanpur, India.
10.
MarklandM. E., 2006. Appropriate Housing in Peru: The Socioeconomic & Cultural Feasibility of Using Tire-Strips for Seismic Reinforcement of Adobe Houses, Research report in partial fulfilment of a Masters Degree in Development Studies, Victoria University of Wellington (unpublished).
11.
MayorcaP., and MeguroK., 2009. A step towards the formulation of a simple method to design PP-band mesh retrofitting for adobe/masonry houses, Proceedings of the 14th World Conference on Earthquake Engineering, October 12–17, Beijing, China.
12.
OttazziG. P., 1989. Ensayos de Simulacion Sismica de Viviendas de Adobe, Publicacion DI-89-01, Pontifica Universidad Católica del Perú, Departamento de Ingenieria, Lima.
13.
Servicio Nacional de Capacitación para la Industria de la Construcción (SENCICO), 2003. Norma Téchnica de Edificación E. 030 Diseño Sismorresistente, Lima, Peru.
14.
TollesE. L., KimbroE. E., and GinellW. S., 2002. Planning and Engineering Guidelines for the Seismic Retrofitting of Historic Adobe Structures, Getty Conservation Institute, Getty Publications, Los Angeles, CA, 160 pp.
15.
TurerA., KorkmazS. Z., and KorkmazH. H., 2007. Performance improvement studies of masonry houses using elastic post-tensioning straps, Earthquake Engng Struct Dyn.36, 683–705.
16.
Vargas-NeumannJ., TorrealvaD., and BlondetM., 2007. Constructión de Casas Saludables y Sismorresistentes de Adobe Reforzado con Geomallas, Fondo Editorial, Pontifica Universidad Católica del Perú.
17.
Villa-GarciaG. V. et al, 2009. Basic Report INF–LE 302.08, Laboratorio de Estructuras, Pontifica Universidad Católica del Perú.
