Factors influencing the elastic stability of orthotropic plates containing a rectangular cut-out

Abstract

A parametric study of the elastic buckling loads for rectangular orthotropic plates with square or rectangular cut-outs has been carried out. The effect of cut-out size, cut-out location and orientation of principal material directions were all investigated, as well as the effects of changing the material modular ratio and shear modulus. Simply supported and fully fixed boundaries were both considered. The analyses employed the conjugate load-displacement method for elastic instability analysis applied to element discretization of the plates.

The main conclusion from this work was confirmation that the presence of a hole could equally well raise the elastic critical load just as much as lower it, depending on the hole size, shape and location and also the aspect ratio of the plate. From the viewpoint of material properties, it was found that the shear modulus, an independent property for orthotropic materials, has a major influence on the critical load.

Keywords

plates elastic stability cut-out orthotropic

Get full access to this article

View all access options for this article.

References

Harik

I. E.

Ekambaram

Elastic stability of orthotropic plates

Thin-Walled Structs, 1988, 6, 405–416.

Lee

K. J.

Buckling analysis of orthotropic plates using a finite element method of assumed displacement functions

Computers Structs, 1992, 42, 159–166.

Nair

S. L.

Singh

Rao

G. V.

Stability of laminated composite plates subjected to various types of in-plane loadings

Int. J. Mech. Sci., 1996, 38, 191–202.

Brown

C. J.

Yettram

A. L.

Elastic stability of orthotropic plates using the conjugate load/displacement method

Computers Structs, 1994, 53, 1493–1496.

Yettram

A. L.

Awadalla

E. S.

A direct matrix method for the elastic stability analysis of plates

Int. J. Mech. Sci., 1968, 10, 887–901.

Marshall

I. H.

Little

El Tayeby

M. M.

Composite panels with circular cut-outs. In Proceedings of the Reinforced Plastics Conference, Nottingham, 1986, pp. 91–94.

Larsson

P.-L.

On buckling of orthotropic compressed plates with circular holes

Composite Structs, 1987, 7, 103–121.

Yasui

Buckling of rectangular composite plates with cutout under uniaxial and biaxial compression. In Proceedings of the Eighth International Conference on

Composite Materials (Eds Tsai

S. W.

Springer

G. S.

), Honolulu, Hawaii, 1991, pp. 4-B-1–4-B-8.

Srivatsa

K. S.

Krishna Murty

A. V.

Stability of laminated composite plates with cut-outs

Computers Structs, 1992, 43, 273–279.

10.

Walker

Optimal design of symmetric laminates with cut-outs for maximum buckling load

Computers Structs, 1999, 70, 337–343.

11.

Yasui

Tsukamura

Buckling strength of rectangular FRP plate with a hole (in the case of CFRP and GFRP cross-ply laminated plates)

J. Soc. Mater. Sci., Japan, 1988, 37, 1050–1056.

12.

Nemeth

M. P.

Buckling and postbuckling behaviour of laminated composite plates with a cut-out In Buckling and Postbuckling of Composite Plates (Eds Turvey

G. J.

Marshall

I. H.

), 1995 (Chapman and Hall, London).

13.

Rockey

K. C.

Evans

H. R.

Griffiths

D. W.

Nethercot

D. A.

The Finite Element Method—a Basic Introduction, 1975 (Crosby Lockwood Staples, London).

14.

Shakerley

T. M.

Brown

C. J.

Elastic buckling of plates with eccentrically positioned rectangular perforations

Int. J. Mech. Sci., 1996, 38, 825–838.

15.

Bulson

P. S.

The Stability of Flat Plates, 1970 (Chatto and Windus, London).