An experimental investigation into the crack propagation in aluminium alloy 2014 is described. Panels, 120 mm wide by 300 mm long were pre-loaded to a constant force applied by two identical compressed gas cylinders following which a crack was induced by forcing open a pre-machined notch with a wedge travelling at approximately 30 m/s. The crack growth was recorded by high-speed photography. The crack tip opening angle of a rapidly propagating crack was measured from plain flat specimens. In addition, crack arrestors in the form of slots and ribs have been studied. The results highlight the effect of rolling direction of the material and constitute a basis for the validation of numerical modelling tools.
Inspection and repair of damaged steel pipelines. Report BGC/P5/P11, British Gas, 1983.
2.
CorranR. S. J.DaviesP. H.RuizC.Extremal elastic-ideally plastic solutions for assessment of flaws in notch-tough materialsEngng Fract. Mechanics, 1982, 16, 585–604.
3.
RuizC.Ductile growth of a longitudinal flaw in a cylindrical shell under internal pressureInt. J. Mech. Sci., 1978, 20, 277–282.
4.
RuizC.MartindaleI. M.Containment of high energy fragments in aero engines. In Proceedings of the Seminar onForeign Object Impact and Energy Absorbing Structures in Aerospace, London, 1998 (Professional Engineering Publishing, Bury St Edmunds and London).
5.
KanninenM. F.MarcharidK. A.O'DonoghueP. E.Analysis of deformation and fracture of aircraft fuselages subjected to blast loading. FAA Workshop, Pleasantville, New Jersey, April 1992.
6.
KanninenM. F.MarcharidK. A.O'DonoghueP. E.An advanced fracture mechanics analysis of deformation and fracture in aircraft fuselages subjected to on-board blastloading. FAA Workshop, Pleasantville, New Jersey, April 1992.
7.
TaoJ.RuizC.Appraisal of methods of analysis of ductile failure. UTC Report E24375, British Gas, 1996.
8.
KanninenM. F.GrantT. S.DemofoniG.VenziS.Development of theoretically based guidelines of ductile fracture in gas transmission pipelines. In Proceedings of the PRC-EPRG 9th Technical Meeting onLine Pipe Research, Houston, Texas, 1993.
9.
BaumM. R.Disruptive failure of pressure vesselsTrans. ASME, J. Pressure Vessel Technol., 1988, 110, 168–176.
10.
ShoemakerA. K.McCartneyR. F.Displacement considerations for a ductile fracture in a line pipeJ. Engng Mater., 1974, 95, 318–322.
11.
EmeryA. F.PerlM.LoveW. J.KobayashiA. S.On the motion of an axial through crack in a pipeTrans. ASME, J. Pressure Vessel Technol., 1981, 103, 281–286.
12.
KanninenM. F.GrantT. S.VenziS.The development and validation of theoretical ductile fracture model. In Proceedings of the 8th Symposium onGas Pipe Research, Houston, Texas, 1993.
13.
ASTM Standard E 1221–88 Standard test method for determining plane-strain crack arrest fracture toughness of ferritic steels. In Annual Book of ASTM Standards, 1988, pp. 798–813 (American Society of Testing and Materials, Philadelphia, Pennsylvania).
14.
TipperC. F.Testing for brittleness in structural steels. In Proceedings of the Conference onBrittle Fracture in Steel, Cambridge, 1959, 1962 (HMSO, London).
15.
CorranR. S. J.BenitezF. G.HardingJ.RuizC.Towards the development of a dynamic fracture initiation test In Application of Fracture Mechanics to Materials and Structures (Eds SihG.SommerE.DahlJ.), 1984, pp. 443–454 (Martinus Nijhoff, The Hague).
16.
PetrinicN.Deformation and failure of aluminium specimens subjected to uniaxial tensile loading at three distinct rates of strain. UTC Report 160, Department of Engineering Science, University of Oxford, 2001.
17.
BS 131–6: 1998Notched Bar Tests. Part 6: Method for Precision Determination of Charpy V-notch Impact Energies for Metals, 1998 (British Standards Institution, London).
18.
DowlingE. N.Mechanical Behavior of Materials, 1993 (Prentice-Hall, Englewood Cliffs, New Jersey).
19.
Medina-VelardeJ. L.Fast ductile crack growth in panels. DPhil thesis, Department of Engineering Science, University of Oxford, 2000.
20.
DawickeD. S.SuttonM. A.NewmanJ. J.C.BigelowC. A.Measurement and analysis of critical CTOA for an aluminium alloy sheet In Fracture Mechanics (25th Conference), ASTM STP 1220 (Ed. ErdoganF.), 1995 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
21.
KanninenM. F.Towards an elastic-plastic fracture mechanics predictive capability for reactor pipingNucl. Engng Des., 1978, 48, 117–134.
22.
DawickeD. S.PiascikR. S.NewmanJ. J. C.Analysis of stable tearing in a 7.6 mm thick aluminium plate alloy In Fatigue and Fracture Mechanics (28th Conference), ASTM STP 1321 (Eds UnderwoodJ. H.MacdonaldB. D.MitchellM. R.), 1997, pp. 90–104 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
23.
LeeJ.KokalyT.KobayashiA. S.Dynamic ductile fracture of aluminum SEN specimens. An experimental-numerical analysis. InAdvances in Fracture Research, Proceedings of the 9th International Conference on Fracture (ICF9), Sydney, Australia, 1997, pp. 2965–2972 (Pergamon, Oxford).
24.
SuttonM. A.DawickeD. S.NewmanJ. C.JrOrientation effects on the measurement and analysis of critical CTOA in an aluminium alloy sheet. Technical Memorandum NASA-TM-109153, Langley Research Center, National Aeronautics and Space Administration, 1994.
25.
OmoryY.et al. T* integral under plane stress crack growth. In Fatigue and Fracture Mechanics (27th Conference), ASTM STP 1296 (Eds PiascikR. S.NewmanJ. C.DowlingN. E.), 1997, pp. 61–71 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
26.
O'DonoghueP. E.The development and validation of a dynamic fracture propagation model for gas transmission pipelinesInt. J. Pressurised Vessels and Piping, 1997, 70, 11–25.
LawsonM.Some aspects of modelling the containment of fan blades. In Proceedings of the 1st European LS-DYNA Conference, Stratford-upon-Avon, 1997, pp. 21.1–21.8.
30.
BroekD.The Practical Use of Fracture Mechanics, 1989, 1st edition (Kluwer, Dordrecht, The Netherlands).
31.
Medina-VelardeJ. L.PetrinicN.RuizC.Parametric study of ductile crack propagation in aluminium panels. In Proceedings of the 6th International Conference onMechanical and Physical Behaviour of Materials under Dynamic Loading (DYMAT 2000), Krakow, Poland, September 2000 (EDP Sciences).
