Stresses in the vicinity of an unreinforced mitre intersection: An experimental and finite element comparison

Abstract

The experimental investigation reported provides elastic stresses in the vicinity of the unreinforced intersection of a single 90° mitred bend, subjected to an in-plane bending moment. The specimen was extensively strain gauged on the outer surface. A small number of rosettes were also laid on the inside surface close to the welded intersection. The procedures used for the successful installation of the inside surface gauges are discussed. In the experiment, consideration was also given to deflections and rotations. Satisfactory comparisons with adaptive-p thin-shell finite element results were obtained in general and differences are explained in terms of the known experimental variables and finite element approximations. The nature of the stresses at such intersections is discussed and various methods of obtaining fatigue ‘hot-spot’ stresses are considered.

Keywords

single unreinforced mitred bend elastic stress experimental investigation finite element analysis hot-spot stress

Get full access to this article

View all access options for this article.

References

Wood

Observations on shell intersections. In Proceedings of the Fourth World Congress on

Finite element methods, Interlaken, Switzerland, September 1984, pp. 461–472 (Robinson and Associates, Okehampton, Devon).

Wood

Procedural benchmarks for common fabrication details in plate/shell structures, 2005 (NAFEMS, Glasgow).

Niemi

Friche

Maddox

S. J.

Fatigue analysis of welded components: designer's guide to the structural hot-spot stress approach, 2006 (Woodhead, Abington, Cambridge).

BS PD5500. Specification for unfired fusion welded pressure vessels, 2000 (British Standards Institution, London).

BS EN 1993–1-9. Design of steel structures, 2005 (British Standards Institution, London).

Peckover

R. S.

Fraser

R. A. W.

Crisp

H. G.

United Kingdom Offshore Steels Research Project - Phase 1, Final report OTH 88 282; UK Department of Energy, London 1985.

BS 3601. Specification for carbon steel pipes and tubes with specified room temperature properties for pressure purposes, 1987 (British Standards Institution, London).

BS EN 1002–1. Tensile testing of metallic materials: method of test at ambient temperature, 2001 (British Standards Institution, London).

Pople

BSSM strain measurement reference book, 1979 (British Society of Strain Measurement, Bedford).

10.

Strain Gage Installations with M-Bond 200 adhesive. Instruction bulletin B-127–14, Vishay micro-measurements, 2005 (Intertechnology, Don Mills, Ontario).

11.

Sobieszczanski

Strength of a pipe mitred bend

Trans. ASME, J. Engng Industry, 1970, 54, 767–773.

12.

Edwards

Cylindrical shell hybrid finite elements. PhD Thesis, University of Nottingham, 1974.

13.

Wood

A review of the literature for the structural assessment of mitred bends

Int. J. Pressure Vessels Piping, 2007 (submitted for publication).

14.

Hobbacher

Recommendations for fatigue design of welded joints and components, IIW report XIII-1539–96, International Institute of Welding, London, update June 2002.

15.

Dong

A structural stress definition and numerical implementation for fatigue analysis of welded joints

Int. J. Fatigue, 2001, 23, 865–876.