A rig for controlled cyclic strain and temperature testing

Abstract

A servo-hydraulic test rig capable of applying combined temperature and strain or load cycles has been developed and commissioned. The nature of the test has dictated the specimen form as a hollow, hour-glass type.

The critical problem of a suitable extensometer for temperature and strain cycling has been solved. The device designed and produced shows negligible transient temperature effects, has a high resolution of better than 0.1 μm, and is mechanically very stable.

The heating and cooling is controlled by an induction heating system with grip cooling; additional cooling is available using compressed air passing through the hollow specimen. The system is capable of following a temperature ramp to within 1°C linearity. The thermal strain associated with a temperature cycle is compensated for using a microprocessor system specially developed for the purpose, which also enables a mechanical strain-stress loop to be plotted during a test.

Both ‘in-phase’ and ‘out-of-phase’ temperature/strain cycles have been carried out and development continues to include dwell periods.

Get full access to this article

View all access options for this article.

References

Carden

A. E.

Kyzer

R. D.

Vogel

W. H.

‘Low cycle fatigue of three super alloys under cyclic extension and cyclic temperature conditions’, ASTM-67-MET, 19, April, 1967.

Jaske

C. E.

‘Thermal mechanical low cycle fatigue of AISI 1010 steel’, Thermal fatigue of materials and components, ASTM STP 612, 1976.

Kuwabara

Nitta

‘Thermal-mechanical low cycle fatigue under creep-fatigue interaction on Type 304 stainless steel’, Fatigue Engng Metals Structures, 1979, 2, 293–304.

Sheffler

K. D.

Doble

G. S.

‘Thermal fatigue behaviour of T-111 and ASTAR 811C in ultra high vacuum’, Fatigue at elevated temperatures, ASTM STP 520, 1973, pp. 491–499.

Ellison

E. G.

Paterson

A. J. F.

‘Behaviour of a 1 Cr Mo V steel subject to combinations of fatigue and creep under strain control’, Proc. Instn mech. Engrs, 1976, 190, 333–340.

Paterson

A. J. F.

Ellison

E. G.

‘Predictions of deformation and life under fatigue/creep conditions’, Proc. Instn mech. Engrs, 1976, 190, 341–350.

Priest

Ellison

E. G.

‘An assessment of life analysis techniques for fatigue/creep situations’, Res. Mechanica, 1984, 4, March.

Van Leeuwen

H. P.

Mucuoglu

M. C.

‘Requirements for an axial fatigue machine capable of fast cyclic heating and loading’, Agardograph 66, 1961 (NATO, London).

Slot

Stentz

P. H.

Berling

J. T.

‘Controlled strain testing procedures’, Manual on low cycle fatigue testing, ASTM STP 465, 1969, pp. 100–128.

10.

Beauchamp

D. J.

Ellison

E. G.

‘Development of a temperature and strain cycling rig’, University of Bristol, Department of Mechanical Engineering, Report No. 79/7, 1979.

11.

Bui-Quoc

Biron

‘Comparison of low cycle fatigue results with axial and diametral extensometers’, Expl Machines, 1978, 18, 127–133.

12.

Cook

Cavill

‘An experimental arrangement for direct high strain fatigue tests at elevated temperatures’, J. Scientific Instruments (J. Physics), 1968, 1, 337–340.

13.

Hopkins

S. W.

‘Low cycle thermal mechanical fatigue testing’, Thermal fatigue of materials and components, ASTM STP 612, 1976, pp. 157–169.