Stress analysis of some nut-bolt connections with modifications to the external shape of the nut

Abstract

The effect on the stress levels in an axially loaded bolt has been investigated for the case where a nut which incorporated a circumferential groove in its outer surface was used. It was found from a three-dimensional photoelastic frozen stress study that the modified nut reduced the maximum stress in the bolt by 5 per cent. The addition of a bevel to the load bearing face of this nut further reduced the maximum stress to 74 per cent of its value in a standard connection. It has been established that these modifications reduce the maximum shear stress in the roots of the nut threads, and that the stress concentration associated with the groove was smaller than the maximum stress concentration in both the nut and bolt thread roots. The increase indicated by photoelastic analyses in the strength of the connection produced by these modifications, has also been substantiated by fatigue tests of steel connections, but these results are not reported in this paper.

Get full access to this article

View all access options for this article.

References

Den Hartog

J. P.

‘The mechanics of plate rotors for turbogenerators’, Trans ASME, 1929, 51, 1–10.

Sopwith

D. G.

‘The distribution of load in screw threads’, Proc. Instn mech. Engrs, 1948, 159, 373–383.

Motosh

‘Load distribution on threads of titanium tension nuts and steel bolts’, J. Eng. Ind., Trans ASME, 1975, 97(B), 162–166.

Miller

D. L.

Marshek

K. M.

Naji

M. R.

‘Determination of load distribution in a threaded connection’, Mech. Mach. Theory, 1983, 18, 421–430.

Goodier

J. H.

‘Distribution of load on threads of screws’, Trans ASME, 1940, 62, A10–A16.

Stoeckley

E. E.

Macke

H. J.

‘Effect of taper on screw thread load distribution’, Trans ASME, 1952, 74, 103–112.

Kenny

Patterson

E. A.

‘Load and stress distribution in screw threads’, Expt. Mech., 1985, 25, 208–214.

Hetenyi

‘The distribution of stress in threaded connections’, Expt. Stress Analysis, 1943, 1, 147–156.

Brown

A. P. C.

Hickson

‘A photoelastic study of stresses in screw threads’, Proc. Instn mech. Engrs, 1952, IB, 605–612.

10.

Patterson

E. A.

Kenny

‘The optimisation of the design of nuts with partly tapered threads’, J. Strain Analysis, 1986, 21, 77–84.

11.

Seika

Sasaki

Hosono

‘Measurement of stress concentrations in threaded connections’, Bull. JSME, 1974, 17, 1151–1156.

12.

Doniselli

Mondina

‘Influence of shape on stresses in threaded connections’, Proc. 6th Canadian Congress of Applied Mechanics, 1977, University of British Columbia, Vancouver, pp. 317–318.

13.

Moore

R. R.

‘Effect of grooves, threads, and corrosion upon the fatigue of metals’, Proc. ASTM, 1926, 26, 255–280.

14.

Weigand

Uber die dauerfestigkeit von schranbenwekstoffen und schrauben-verbuidungen, (Bauer and Schaurte, A. G., Neuss, Germany) 1934.

15.

Tanaka

Hongo

Asaba

‘Finite element analysis of the threaded connections subjected to external loads’, Bull. JSME, 1982, 25, 291–298.

16.

Kenny

Patterson

E. A.

‘New design of nut redistributes axial load’, Des. Engng, June 1986, 30–36.

17.

Fessler

Jobson

P. K.

‘Stresses in a bottoming stud assembly with chamfer at the ends of the threads’, J. Strain Analysis, 1983, 18, 15–22.

18.

Fessler

Wang

Jiong-Hua

‘Stress analysis of some unsymmetric screwed connections’, J. Strain Analysis, 1984, 19, 111–119.

19.

Kenny

Patterson

E. A.

‘Stress analysis of some nut-bolt connections with modification to the nut thread form’, J Strain Analysis, 1985, 20, 35–40.