An improved boundary element formulation for calculating stress intensity factors: Application to aerospace structures

Abstract

In order to compute stress intensity factors accurately, the standard boundary element method is modified to take explicit account of the singularity in the stresses at a crack-tip. The known expansion terms of the crack tip displacement and stress fields are subtracted to remove the numerical difficulties associated with the representation of a singular stress field at the crack-tip. Hence the accuracy of calculation is much improved, without appreciably increasing the amount of computation involved. Furthermore, the stress intensity factor is directly obtained as a part of a solution and no extrapolations are required. The improved formulation is applied to a configuration, which is representative of a part of the wing in a civil transport aeroplane. This configuration consists of a pair of circular cut-outs (supply ports) near to which smaller holes exist; these small holes are particularly susceptible to cracking.

Get full access to this article

View all access options for this article.

References

Cruse

T. A.

‘Two dimensional BIE fracture mechanic analysis’, Appl. Math. Modell., 1978, 2, 287–293.

Mason

J. C.

Smith

R. N. L.

Thompson

R. M.

‘Stress intensity factor evaluation by boundary element methods for crack at holes’, Proc. 3rd Int. Conf. on Numerical Methods in Fracture Mechanics, 1984 (Pineridge Press, Swansea).

Cruse

T. A.

‘General solution procedure for fracture mechanics weight function evaluation based on the boundary element method’, to be published.

Crouch

S. L.

‘Solution of plane elasticity problems by the displacement discontinuity method’, Int. J. numer. Methods Engng., 1976, 10, 301–343.

Blandford

G. E.

‘Two-dimensional stress intensity factor computations using the boundary element method’. Int. J. numer. Methods Engng, 1981, 17, 387–404.

Cruse

T. A.

The surface crack physical and computational solutions, 1972 (Edited by Swedlow

J. L.

), (ASME), pp. 153–170.

Cartwright

D. J.

Rooke

D. P.

‘An efficient boundary element model for calculating Green's functions in fracture mechanics’, Int. J. Fracture, 1985, 27, R41–R50.

Papamichael

Symm

G. T.

‘Numerical techniques for two-dimensional Laplaciar problems’, Comp. Meth. appl. mech. Engng, 1975, 6, 175–194.

Xanthis

L. S.

Bernal

M. J. M.

Atkinson

‘The treatment of sigularities in the calculation of stress intensity factors using the boundary element method’, Comp. Meth. appl. mech. Engng, 1981, 26, 285–304.

10.

CHING-BING LING , ‘On the sresses in a plate containing two circular holes’, J. appl. Phys., 1941, 19, 77–82.

11.

Newman

J. C.

‘An improver method of collocation for the stress analysis of cracked plates with various shaped boundaries’. NASA TN D-6371, 1971.

12.

Isida

‘Method of Laurent series expansion for internal crack problems’, Method of analysis and solution of crack problems’, Mechanics of fracture I, 1973 (Edited by Sih

G. C.

) (Noordhoff. Leyden), pp. 56–130.

13.

Cartwright

D. J.

Rooke

D. P.

‘Approximate stress intensity factors compounded from known solutions’, Engng Fracture Mech., 1974, 6, 563–571.

14.

Rooke

D. P.

Compounding sress intensity factors (Research reports in materials science, Series I, 1986 (Edited by Evans

P. E.

) (Parthenon Press, Carnforth).

15.

Williams

M. L.

‘On the stress distribution at the base of a stationary crack’. J. appl. Mech., 1957, 24, 109–114.