Influence of the volume fraction of fibre-reinforced orthotropic composite on the mode-I stress intensity factor

Abstract

In the case of infinite bodies involving self-equilibrating loads, stress intensity factors (SIFs) for isotropic and orthotropic materials are the same. However, when the specimen is bounded, material orthotropy does influence the value of SIFs. Delale and Erdogan evaluated the mode-I SIF by solving singular integral equations numerically and showed that the SIF can be greater than the isotropic material value for certain types of orthotropic materials and can be smaller than the isotropic material value for certain other types of materials. They also observed that the mode-I SIF is not altered when either the crack is parallel or perpendicular to the fibre. These observations are verified by finite element analysis. The contours of iso-chromatics observable in a photoelasticity experiment are plotted to verify the suitability of finite element (FE) modelling and discretization. Using the FE code developed, the variation of the mode-I SIF for a single-edge notched (SEN) specimen as a function of volume fraction for unidirectional glass fibre-polyester laminate is obtained. The volume fraction is varied from 0.1 to 0.8 and the a/w ratio is varied from 0.1 to 0.8 in steps of 0.1. The contours of isochromatics observable in a photo-orthotropic elasticity experiment are plotted for the case of the a/w ratio of 0.3 as a function of fibre volume fraction.

Keywords

orthotropic composite stress intensity factor E-glass fibre-polyester laminate FE modelling photoelasticity photo-orthotropic elasticity

Get full access to this article

View all access options for this article.

References

Sih

G. C.

Paris

P. C.

Irwin

G. R.

On cracks in rectilinearly anisotropic bodies. Int. J. Fracture Mechanics, 1965, 1, 189–203.

Delale

Erdogan

The problem of internal and edge cracks in an orthotropic strip. Trans. ASME, J. Appl. Mechanics, 1977, 44, 237–242.

Sethuraman

Maiti

S. K.

Finite element based computation of strain energy release rate by modified crack closure integral. Engng Fracture Mechanics, 1988, 30, 227–231.

Binienda

Wang

A. S.D.

Delale

Analysis of bent crack in unidirectional fibre reinforced composites. Int J. Fracture, 1991, 47, 1–24.

Cook

R. D.

Malkus

D. S.

Plesha

M. E.

Concepts and Applications of Finite Element Analysis, 1989 (John Wiley, Chichester).

Bert

C. W.

Anisotropic material behaviour. In Manual on Experimental Methods for Mechanical Testing of Composites (Eds Pendelton

R. L.

Tuttle

M. E.

), 1989, pp. 5–10 (SEM).

Irwin

G. R.

Fracture I. In Handbuch der Physik, Vol. VI (Ed. Flügge

), 1958, pp. 558–590 (Springer-Verlag, Berlin).

Rybicki

E. F.

Kanninen

M. F.

A finite element calculation of stress intensity factors by a modified crack closure integral. Engng Fracture Mechanics, 1977, 9, 931–938.

Ramamurthy

T. S.

Krishnamurthy

Badri Narayana

Vijayakumar

Dattaguru

Modified crack closure integral method with quarter point elements. Mech. Res. Commun., 1986, 13, 179–186.

10.

Harrop

L. P.

The optimum size of quarter-point crack-tip element. Int. J. Numer. Meth. Engng, 1982, 17, 1101–1103.

11.

Dally

J. W.

Prabhakaran

Photo-orthotropic-elasticity. Expl Mechanics, 1971, 11, 346–356.

12.

Ramesh

Yadav

A. K.

Pankhawalla

V. A.

Plotting of fringe contours from finite element results. Commun. Numer. Meth. Engng, 1995, 11, 839–847.

13.

Kobayashi

A. S.

(Ed.) Handbook on Experimental Mechanics, 1993 (SEM).

14.

Rooke

D. P.

Cartwright

D. J.

Compendium of Stress Intensity Factors, 1976 (HMSO, London).

15.

Delale

Bakirtas

Erdogan

The problem of an inclined crack in an orthotropic strip. Trans. ASME, J. Appl. Mechanics, 1979, 46, 90–96.

16.

Ramesh

Tiwari

A brief review of photo-orthotropic elasticity theories. Sadhana, 1993, 18, 985–997.