Laser overlap welding of zinc-coated steel is an attractive process for the automotive industry, but specific problems can occur where apparently good welds may be produced but with no join between the two sheets of material. This paper describes a simple and reliable technique for detecting these errors by analysing the light generated by the welding process, using an optical sensor which is non-intrusive to the process.
HaranF. M.HandD. P.PetersC.JonesJ. D. C.Focus control system for laser welding. Appl Opt., 1997, 36, 5246–5251.
2.
FoxM. D. T.PetersC.BlewettI. J.HandD. P.JonesJ. D. C.Real-time optical monitoring of gas shield condition during Nd:YAG laser welding. In Proceedings of International Congress on Applications of Lasers and Electro-Optics (ICALEO 1998), Orlando, Florida, 1998, paper 1501 (Laser Institute of America, Orlando, Florida).
3.
HaranF. M.HandD. P.EbrahimS. M.PetersC.JonesJ. D. C.Optical signal oscillations in laser keyhole welding and potential application to lap welding. Measmt Sci. Technol., 1997, 8, 627–633.
4.
HandD. P.PetersC.JonesJ. D. C.Nd: YAG laser welding process monitoring by non-intrusive optical detection in the fibre optic delivery system. Measmt Sci. Technol., 1995, 6, 1389–1394.
