Investigation into a new incremental forming process using an adjustable punch set for the manufacture of a doubly curved sheet metal

Abstract

For flexible manufacture of a doubly curved sheet metal, a new sheet metal forming process is proposed that uses a movable punch set composed of two pairs of lower support punches and one upper centre punch. The process is characterized by flexibility compared with the existing conventional processes because it does not require any complex-shaped die and the loss of material is minimized by unconstrained forming. The process involves very little thickness. strain by applying the principle of bending deformation instead of stretching. In the preliminary finite element method (FEM) simulation it is found that the curvature of the formed sheet metal is determined by the distance between the supporting punches working in pairs and the forming depth of the centre punch. In the experiments using sheets of aluminium, a method with edge forming is proposed for producing sheet metal in the desired shape. The equation using process variables such as the distance between supporting punches in pairs and the forming depth of the centre punch is proposed for the prediction of curvature of the formed shape. The equation is revised by the experimental results and the FEM simulation results containing springback information. It is then shown that the radius of curvature for the formed sheet metal can be predicted by the revised equation unless a very large amount of springback occurs.

Keywords

incremental sheet metal forming new forming process dieless forming unconstrained forming doubly curved sheet

References

Avitzur

Yang

C. T.

Analysis of power spinning of cones. Trans. ASME, J. Engng for Industry, 1960, 82, 231–245.

Kalpakcioglu

A study of shear—spinnability of metals. Trans. ASME, J. Engng for Industry, 1961, 83, 485–495.

Powell

N. N.

Andrew

Incremental forming of flanged sheet metal components without dedicated dies. Proc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 1992, 206(BI), 41–47.

Matsubara

Tanaka

Nakamura

Forming process of spherical surface by incremental press forming system. J. Jap. Soc. Technol. Plasticity, 1994, 35(406), 1330–1335.

Matsubara

Incremental backward bulge forming of a sheet metal with a hemispherical head tool. J. Jap. Soc. Technol. Plasticity, 1994, 35(406), 1311–1316.

Iseki

Kumon

Forming limit of incremental sheet metal stretch forming using spherical rollers. J. Jap. Soc. Technol Plasticity, 1994, 35(406), 1336–1341.

Kitazawa

Wakabayashi

Murata

Seino

A CNC incremental sheet metal forming method for producing the shell components having sharp corners. J. Jap. Soc. Technol. Plasticity, 1994, 35(406), 1348–1353.

Shima

Kotera

Murakami

Development of flexible spin-forming method. J. Jap. Soc. Technol. Plasticity, 1997, 38(440), 814–818.

Cho

C. H.

Development of a new NC-controlled trial manufacturing process for sheet metal forming. MS thesis, KAIST, 1997.

10.

Kim

T. J.

Yang

D. Y.

Improvement of formability for the incremental sheet metal forming process. Int. J. Mech. Sci., 2000, 42, 1271–1286.

11.

Yoon

J. W.

Song

I. S.

Yang

D. Y.

Chung

Barlat

Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system. Int. J. Mech. Sci., 1995, 37(7), 733–752.

12.

Yoon

J. W.

Yang

D. Y.

Chung

Barlat

A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming. Int. J. Plasticity, 1999, 15(1), 35–67.