Evaluation of CO 2 and Nd:YAG Lasers for the Selective Laser Sintering of HAPEX®

Abstract

This paper evaluates and compares the performance of a CO₂ and Nd:YAG laser for the selective laser sintering (SLS) of a commercial hydroxyapatite reinforced polyethylene (HA-HDPE) bioactive ceramic polymer composite material. Single-line and layer specimens were produced to compare the effects of different lasers on the material sintering. It was found that the processing window was much larger for the CO₂ laser as compared to the Nd:YAG laser. Furthermore, the Nd:YAG processing window was highly dependent on the pulse width and pulse repetition rate parameter settings. Furthermore, the processing windows for both the laser systems were affected by the particle size of the HA-HDPE powders. The degree and mechanism of particle fusion existing in the composites layers were greatly influenced by the laser source and particle size. The results presented in this work clearly indicate that the CO₂ laser would present a better performance than the Nd:YAG laser for the SLS of HAPEX® in terms of operation range, speed, processing efficiency, and, subsequently, greater potential as an SLS processing method for bioactive implant products.

Keywords

laser selective laser sintering hydroxyapatite polyethylene bioactive implants

References

Kruth

J. P.

Leu

M. C.

Nakagawa

Progress in additive manufacturing and rapid prototyping. Ann. CIRP, 1998; pp. 525–540.

Gill

T. J.

Hon

K. K. B.

Experimental investigation into the selective laser sintering of silicon carbide polyamide composites. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2004, 218, 1249–1256.

Leong

K. F.

Phua

K. K. S.

Chua

C. K.

Z. H.

Teo

K. O. M.

Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215(H2), 191–201.

Williams

J. D.

Deckard

C. R.

Advances in modelling the effects of selected parameters on the SLS process. Rapid Prototyping J., 1998, 4(2) 90–100.

Kruth

J. P.

Mercelis

Vaerenbergh

J. V.

Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping J., 2005, 11(1), 26–36.

Kruth

J. P.

Wang

Laoui

Froyen

Lasers and materials in selective laser sintering. Rapid Prototyping J., 2003, 23(4), 357–371.

Tolochko

N. K.

Laoui

Khlopkov

Y. V.

Mozzharouv

S. E.

Titov

V. I.

Ignatiev

M. B.

Absorptance of powder materials suitable for laser sintering. Rapid Prototyping J., 2000, 6(3), 155–160.

Steen

W. M.

In Laser material processing. 1998, p. 47 (Springer Verlag).

Vaucher

Paraschivescu

Andre

Beffort

Selective laser sintering of aluminium-silicon carbide metal matrix composites. In Materials Week, 2002.

10.

Bourell

D. L.

Marcus

H. L.

Barlow

J. W.

Selective laser sintering of metals and ceramics. Int. J. Powder Metal., 1992, 28(4), 369–381.

11.

Alexandre

Giovanola

Vaucher

Beffort

Vogt

Layered manufacturing of porous ceramic parts from SIC powders and preceramics polymers. Laser Assisted Net Shape Engng., 2004, 4, 497–506.

12.

Kruth

J. P.

Peeters

Smolderen

Bonse

Laoui

Froyen

Comparison bewteen CO2 and Nd: YAG lasers for use with selective laser sintering of steel-copper powders. Int. J. CADCAM and Computer Graphics, 1998, 13(4–6), 95–110.

13.

Tan

K. H.

Chua

C. K.

Leong

K. F.

Cheah

C. M.

Cheang

Bakar

Abu M. S.

Cha

S. W.

Scaffold development using selective laser sintering of poly-etheretherketone-hydroxyapatite biocomposite blends. Biomaterials, 2003, 24(18), 3115–3123.

14.

Chua

C. K.

Leong

K. F.

Wiria

F. E.

Tan

K. C.

Chandrasekara

Fabrication of poly(vinyl alcohol)/hydroxyapatite in tissue engineering. International conference on Competitive manufacturing, 2004.

15.

Bonfield

Behiri

J. C.

Doyle

Bowman

Abram

Hydroxyapatite reinforced polyethylene composites as analogous bone replacement materials. Biomaterials '84: Second world congress on Biomaterials, 10th annual meeting of the society for biomaterials, sixteenth international biomaterials symposium. 1984. Washington DC, USA.

16.

Bonfield

Doyle

Tanner

K. E.

In vivo evaluation of hydroxyapatite reinforced polyethylene composites. In Biological and Biomechanical performance of biomaterials, proceedings of the fifth European confererence on Biomaterials. 1986. Paris, France.

17.

Eniwumide

J. O.

Joseph

Tanner

K. E.

Effect of particle morphology and polyethylene molecular weight on the fracture toughness of hydroxyapatite reinforced polyethylene composite. J. Mater. Sci: Mater. Med., 2004, 15(10), 1147–1152.

18.

Ladizesky

N. H.

Wang

Miettinen

E. M.

Tanner

K. E.

Ward

I. M.

Bonfield

Hydrostatic extrusion of hydroxyapatite polyethylene composite. In Fifth World Biomaterials Congress. 1996. Toronto, Canada.

19.

Wang

Porter

Bonfield

Processing, characterisation, and evaluation of hydroxyapatite reinforced polyethylene composites. Br. Ceramic Trans., 1994, 93, 91–95.

20.

Morgan

Sutcliffe

C. J.

O'Neill

Experimental investigation of nanosecond pulsed Nd: YAG laser re-melted pre-placed powder beds. Rapid Prototyping J., 2001, 7(3), 159–172.

21.

Kruth

J. P.

Froyen

Vaerenbergh

J. V.

Mercelis

Rombouts

Lauwers

Selective laser melting of iron-based powder. J. Mater Process. Technol., 2004, 149, 616–622.

22.

W. N.

Erasenthiran

Dickens

P. M.

Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd: YAG laser. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2002, 217(C), 127–138.

23.

Simchi

The role of particle size on the laser sintering of iron powder. Metall. Mater. Trans. B, 2004, 35(B), 937–948.