Cutting Parameters for the Reduction in Material Degradation in the Laser Cutting of Advanced High-Strength Steels

Abstract

This article presents the optimum cutting conditions for advanced high-strength steel (AHSS) laser cutting. Different series of AHSSs, used in the automotive industry at present, have been tested with different laser cutting parameters. The influence of laser cutting in the material and the changes in metallurgical characteristics have been studied. The results, as expected, demonstrate very different behaviours as a function of sheet thickness, while the variation in cutting parameters due to the influence of the material is less important. The results have been divided into two large groups with thicknesses of more than 1 mm and less than 1 mm. Parameter variation inside each group mainly depends on sheet material coating. The optimum cutting areas and the quality of the cut evaluated with different criteria are presented. Finally, the best position for the laser beam has been observed to be underneath the sheet.

Keywords

advanced high-strength steels laser cutting parameter optimization

References

European Welding Institute, EWI explores advanced high strength steels for the auto industry. Mater. Joining Newslett., 2003, 16(2), 1–2.

Yilbas

B. S.

Effect of process parameters on the kerf width during the laser cutting process. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(10), 1357–1365.

Tani

Tomesani

Campana

Prediction of melt geometry in laser cutting. Appl. Surf. Sci., 2003, 208-209, 142–147.

Rajaram

Sheikh-Ahmad

Cheraghi

S. H.

CO₂ laser cut quality of 4130 steel. Int. J. Mach. Tools Mf, 2003, 43, 351–358.

Wang

Wong

W. C. K.

CO₂ laser cutting of metallic coated sheet steels. J. Mater. Processing Technol., 1999, 95, 164–168.

Steen

W. M.

Laser material processing, 1991 (Springer-Verlag, Berlin).

Yilbas

B. S.

The analysis of CO₂ laser cutting. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 1997, 211(3), 223–232.

Kim

M. J.

3D finite analysis of evaporative laser cutting. Appl. Math. modelling, 2005, 29, 938–954.

Bitzel

Borcherdt

Müller

Neidhart

Parey

Rau

Riecke

Schmid

Trentmann

Vorländer

Zimmermann

The fascinating world of sheet metal, 1996 (TRUMPF, Ditzingen).

10.

Powell

CO₂ laser cutting, 1998. (Springer-Verlag, Berlin).

11.

Chen

S. L.

The effects of high-pressure assistant-gas flow on high-power CO₂ laser cutting. J. Mater. Processing Technol., 1999, 88, 57–66.

12.

Wang

An experimental analysis and optimisation of the CO₂ laser cutting process for metallic coated sheet steels. Int. J Advd Mfg Technol., 2000, 16, 334–340.

13.

Lamikiz

López de Lacalle

L. N.

Sanchez

J. A.

del Pozo

Etayo

J. M.

López

J. M.

CO₂ laser cutting of AHSS. Appl. Surf. Sci., 2005, 242, 362–368.

14.

DIN EN ISO 9013, 2002, Thermal cutting - classification of thermal cuts - geometrical product specification and quality tolerances (Deutsches Institut für Normung, Berlin) (International Standardization Organization, Geneva).