The present study investigates the effects of four controllable variables on the metallurgy and geometry of acute (30° to surface) laser percussion drilled holes in 2 mm thick flat pieces of nickel superalloy: CMSX-4. Design of experiment (DOE) and statistical modelling were used in the experimental study to understand parameter interactions. Assist gas pressure, nozzle stand-off distance, focal plane position (FPP), and number of pulses were chosen as the independent process variables. A central composite design (CCD) was chosen as it offered the most economical number of experiments for the required information. The response surface method (RSM) was used to develop three models. The significant factors in each model were identified based on the analysis of variance (ANOVA), and the models were checked by complete residual analysis. It was found that a high FPP and high nozzle stand off gave the minimum entrance oxide layer thickness whereas the recast layer was minimized for a zero FPP and high pulse number.
YeoC.Y.‘A technical review of the laser drilling of aersopace materials. J. Mater. Process. Technol.42 (1) (1994): 15–49.
2.
SarkarS.DasK.BasuD., Film cooling on a turbine guide vane: A numerical analysis with a multigrid technique. Proc. IMechE, Part A: J. Power and Energy215 (A1) (2001): 9–53 DOI: 10.1243/0957650011536552.
3.
DijkM. H. H. V.VliegerJ. E. D.BrouwerJ. E., Laser precision hole drilling in aero-engine components. In Sixth International Conference on Lasers in manufacturing, 1989 (IFS Publications, Birmingham).
4.
HoK. H.NewmanS. T., State of the art electrical discharge machining (EDM). Int. J. Machine Tools Mf.43 (13) (2003): 1287–1300.
5.
McNallyC. A.FolkesJ.PashbyI. R., Laser drilling of cooling holes in aeroengines: State of the art and future challenges. Mater. Sci. Technol.20 (2004):.
6.
BunkerR. S., A review of shaped hole turbine film- cooling technology. J. Heat Transfer127 (4) (2005): 441–453.
7.
BolinS. R., Nd:YAG laser applications survey. In Laser Materials Processing (BassM. Ed.) (Oxford: North-Holland Publications1983): Pp. 407–438.
8.
OroszR.KruppU.ChristH-J., Study of the oxide scale integrity on Ni-base alloy CMSX-4 during isothermal and thermal-cycling exposure. Mater. Corrosion57 (2) (2006): 154–158.
9.
TiffanyW. B., Drilling Marking and other applications for industrial Nd:YAG laser. Proc. SPIE, 527 (1985): 28–37.
10.
YilbasB. S.YilbasZ., Parameters affecting hole geometry in laser drilling of nimonics 75. SPIE. Lasers in Motion for Industrial Applications, 744 (1986): 87–91.
11.
YilbasB. S., A study of affecting parameters in the laser hole drilling of sheet metals. J. Mech. Working Technol., 13 (1986): 303–315.
12.
YilbasB. S., Investigation into drilling speed during laser drilling of metals. Optics and Laser Technol.20 (1) (1988): 29–32.
13.
TamS. C.YeoC. Y.JanaS.LauM. W. S.LiraL. E. N.YangL. J.Md NoorY., Optimization of laser deep-hole drilling of Inconel 718 using the Taguchi method. J. Mater. Processing Technol., 37 (1993): 741–757.
14.
YilbasB. S., Parametric study to improve laser hole drilling process. J. Mater. Processing Technol., 70 (1996): 264–273.
15.
KamaluJ.ByrdJ. P., Statistical design of laser drilling experiments. In Proceedings of the Laser Materials Processing Conference (ICALEO'98), Orlando, Florida, 16–19 October 1998.
16.
FrenchP. W.HandO. P.PetersC.ShannonG. J.ByrdP.SteenW. M., Investigation of Nd:YAG laser percussion drilling process using factorial experimental design. In Proceedings of ICALEO'99, San Diego, California, 1999, pp. 51–60.
17.
GhoreishiM.LowD. K. Y.LiL., Comprehensive statistical analysis of hole taper and circularity in laser percussion drilling. Int. J. Machine Tool Mf.42 (2002): 985–995.
18.
NgG. K. L.LiL., Optimisation of laser percussion drilling for improved reliability. In Proceedings of ICALEO 02, Scottsdale, Arizona, 14–17 October 2002.
19.
GhoreishiM.LowD. K. Y.LiL., Statistical modelling of laser percussion drilling for hole taper and circularity control. Proc. IMechE, Part B: J. Engineering Manufacture216 (B3) (2002): 307–319 DOI: 10.1243/0954405021519988.
20.
BandyopadhyayS.GokhaleH.Sarin SundarJ. K.SundararajanG.JoshiS. V., A statistical approach to determine process parameter impact in Nd:YAG laser drilling of IN718 and Ti-6Al-4V sheets. Optics and Lasers Engng, 43 (2006): 163–182.
21.
GhoreishiM.NakhjavaniO. B., Optimisation of effective factors in geometrical specifications of laser percussion drilled holes. J. Mater. Processing Technol., 196 (2008): 303–310.
22.
YilbasB. S.AleemA., Laser hole drilling and efficiency assessment. Proc. IMechE, Part B: J. Engineering Manufacture218 (B2) (2004): 225–233 DOI: 10.1243/095440504322886541.
23.
NakhjavaniO. B.GhoreishiM.AghanajafiS., Modeling of laser percussion drilling process using artificial neural network method. WSEAS Trans. Circuits Syst. (3) (2004): 2098–2104.
24.
LowD. K. Y., Spatter and taper control in laser percussion drilling (UMIST, Manchester: Processing and Research Centre2001).
25.
SezerK., Laser drilling of thermal barrier coated jet engine components. In Mechanical Aerospace and Civil Engineering (Manchester University2007).
26.
Hernandez-CastanedaJ. C.SezerH. K.LiL., Statistical analysis of ytterbium-doped fibre laser cutting of dry pine wood. Proc. IMechE, Part B: J. Engineering Manufacture223 (B7) (2009): 775–789 DOI: 10.1243/09544054JEM1397.
27.
MontgomeryD. C., Design and analysis of experimentsFourth edition (New York: Wiley).
28.
GrossM.Goitia BigordJ.KolarikV.EngelW., Oxidation of the turbine blade material CMSX4 studied by X-ray diffraction. J. Phys. IV France08 (PR5) (1998): Pr5–505–Pr5–510.
29.
MyersR. H.MontgomeryD. C., Response surface methodology (New York: Wiley1995).
30.
GhoreishiM.NakhjavaniO. B., Optimisation of effective factors in geometrical specifications of laser percussion drilled holes. J. Mater. Processing Technol., 196 (2008): 303–310.
31.
GhoreishiM.LowD. K. Y.LiL., Hole taper control in laser percussion drilling using statistical modelling. In Proceedings of ICALEO, 2001, Jacksonville, Florida, 15–18 October 2001, pp. 344–352.
