In this paper, an experimental investigation into laser transmission welding of acrylics is carried out. The Taguchi method of parameter design is used as a statistical design of experiment technique to set the optimal process parameters. Experiments are designed and conducted by using Taguchi's L16 orthogonal array. Maximization of weld strength is selected as the quality target. The signal-to-noise ratio and the analysis of variance are used to find the optimum levels within the window of parameters selected and to identify the order of importance of the process parameters. With the frame of this work the effects of process parameters on weld strength is also discussed. Finally, a confirmation test is conducted, which verifies that optimal laser transmission welding parameters can be determined effectively so as to improve weld strength through the Taguchi method.
HanschD.HaffD.PutzH.TreuschH. G.GillnerA.PopraweR.Welding of plastics with diode laser & electro-optics, Orland o, FL, November 16–19 1998 pp. 131–140.
2.
BaylisBWelding thermoplastic elastomers to polypropylene with a diode laser. In Proceedings of the 21st International COngress on Applications of lasers & International Congress on Applications of lasers & electro-optics. Scottsdale, AZ, October 14–17 2002.
3.
KaganV. A.BrayR.ChambersA., Forward to better understand ing of optical characterization and development of colored polyamides for the infra-red/laser welding: Part I - Efficiency of polyamides for infra-red weldingJ. Reinf. Plast. Compos.2003, 22(6) 533–547.
4.
KaganV. A.BrayR. G.KuhnW. P.Laser transmission welding of semi-crystalline thermoplastics: part I: Optical characterization of nylon based plasticsJ. Reinf. Plast. Compos.21(12), 1101–1122.
5.
JanssonA.KouvoS.KujanpääV.Preliminary investigations of laser welding of plastics in massproduction. In Proceedings of the 23rd International Congress on Applications of lasers and electro-optics, San Francisco, CA, October 4–7 2004, Paper 504.
6.
AbedS.LaurensP.CarrétéroC.DeschampsJ. R.DuvalC.Diode laser welding of polymers: microstructures of the welded zones for polypropylene. In Proceedings of the 20th International COngress on Applications of lasers & electro-optics, Jacksonville, FL, October 15–18 2001, Paper 527.
7.
GrewellD.RooneyP.KaganV. A.Relationship between optical properties and optimized processing parameters for through-transmission laser welding of thermoplastics. J. Reinf. Plast. Compos.2004, 23(3), 239–247.
JanssonA.KouvoS.SalminenA.KujanpááV.The effect of parameters on laser transmission welding of polymers. In Proceedings of the 22nd International Congress on Applications of lasers & electro-optics, Jacksonville, FL, October 13–16 2003, Paper 609.
10.
JuangS. C.TarngY. S.Process parameters selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steelJ. Mater. Process. Technol.2002, 122, 33–37.
11.
PanL. KWangC. C.HsisoY. C.HoK. C.Optimization of Nd-YAG laser welding onto magnesium alloy via Taguchi analysisOpt. Laser. Technol.2004, 37, 33–42.
12.
MaghsoodlooS.OzdemirG.JordenV.HuangC. H.Strength and limitations of Taguchi's contributions to quality, manufacturing, process engineering. J. Mfg. Syst.2004, 23(2), 73–126.
13.
AnawaE. M.OlabiA. G.HashmiM. S. J.Optimization of ferritic/ austenitic laesr welded components. In Proceedings of the International Conference on Advances in Materials and processing technology, Las Vegas, NV, July 30-August 2006.
14.
AnawaE. M.OlabiA. G.Effect of laser welding conditions on toughness of dissimilar welded componentsAppl. Mech. Mater.5-6 (2006): 375–380.
15.
LeeH. K.HanH. S.SonK. J.HongS. B.Optimization of Nd-YAG laser welding parameters for sealing small titanium tube endsMater. Sci. Engng A2006, 415, 149–155.
16.
HsuY. C.ChenT. Y.Applying Taguchi methods for solvent-assisted PMMA bonding technique for static and dynamic μ-TAS devicesBiomed. Microdevices, 2007, 9, 513–522.
17.
NalbantM.GokkayaH.SurG.Application of Taguchi method in the optimization of cutting parameters for surface roughness in turningMater Des.2007, 28, 1379–1385.
18.
AnawaE. M.OlabiA. G.Using Taguchi method to optimize welding pool of dissimilar laser-welded componentsOpt. Laser Technol.2008, 40, 379–388.
19.
CaoX.XiaoM.JahaziM.FournierJ.AlainM.Optimisation of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method. Mater. Mfg Process.2008, 23, 413–418.
20.
NgK. W.ManH. C.LawrenceJ.YueT. M.Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi methodProc IMechE Part B: J. Engineering Manufacture.2009, 223(8), 969–979 DOI: 10.1243/09544054JEM1291.
21.
RossP. J.Taguchi technique for quality engineering1998 (McGraw Hill, New York, NY).
