Preliminary study of the effects of crystal orientation of a CVD monocrystalline diamond in micromilling of Ti—6Al

Abstract

Monocrystalline diamond structures (synthetic and naturally occurring), offer the potential to exploit the anisotropic characteristics of this material in cutting tools by enabling the best crystallographic orientation to be selected to suit the application conditions of the tool. This paper investigates the performance of monocrystalline chemical vapour deposition (CVD) diamond tools in micromilling of a titanium based alloy, Ti—6Al—4V. A comparison of single-blade milling cutters using two different crystallographic orientations is made on a high-precision four-axis miniature machine tool. Employing the cutting edges of the monocrystalline diamond with the rake/flank faces of {100}/{110} and {110}/{100} orientations respectively, the progressive wear of the tools has been micrographed, the coincidental workpiece surface quality assessed, and machined chips inspected. Examinations using scanning electron microscopy reveal clear differences in the predominant failure modes of the cutting edges: the {110} rake orientation showing abrasion; the {100} rake orientation showing fracture/cleavage. While the measured roughness (R_a, R_z) of the micromilled workpiece surfaces for the two diamond cutting edge orientations were not significantly different, the surface morphologies show the transition from cutting to tearing and dragging of the workpiece material. The analyses of tool wear and workpiece surface quality proved that monocrystalline CVD diamond cutting edges with preferential crystallographic orientation along rake and clearance faces can be successfully utilized for interrupted cutting operations (i.e. micromilling) of alloys which react with diamond, such as those based on titanium.

Keywords

monocrystalline CVD diamond crystallographic orientation micromilling titanium-based alloy

References

Field

J.E.

. The properties of natural and synthetic diamond, (Academic Press 1992).

Bailey

M. W.

Cook

M. W.

. The future of ultrahard machining in the aerospace industry. Ind. Diamond Rev., 2/02 (2002): 125–132.

Komanduri

. Some clarifications on the mechanics of chip formation when machining titanium alloys. Wear, 76 (1) (1982): 15–34.

Colafemina

J. P.

Jasinevicius

R. G.

Duduch

J. G.

. Surface integrity of ultra-precision diamond turned Ti (commercially pure) and Ti alloy (Ti—6Al—4V). Proc. IMechE, Part B: J. Engineering Manufacture, 221 (B6) (2007): 999–1006 DOI: 10.1243/09544054JEM798.

König

Neises

. Turning Ti-6Al-4V with PCD. Ind. Diamond Rev., 2/93 (1993): 85–88.

Element Six . The properties of CVD diamond, 2009, available from www.e6.com/en/education/materialsresourcecentre/materialsproperties/thepropertiesofcvddiamond/.

Clark

I. E.

Sen

P. K.

. Advances in the development of ultrahard cutting tool materials. Ind. Diamond Rev., 2/98 (1998): 40–44.

Uhlmann

Wörner

Brücher

. More efficient cutting processes due to the heat-spreading effect of CVD diamond. Ind. Diamond Rev., 1/03 (2003): 25–29.

Telling

R. H.

Pickard

C. J.

Payne

M. C.

Field

J. E.

. Theoretical strength and cleavage of diamond. Am. Phys. Soc., 84 (22) (2000): 5160–5163.

10.

Grillo

S. E.

Field

J. E.

van Bouwelen

F. M.

. Diamond polishing: The dependency of friction and wear on load and crystal orientation. J. Physics, D: Appl. Physics, 33 (2000): 985–990.

11.

Uddin

M. S.

Seah

K. H. W.

Rahman

X. P.

Liu

. Performance of single crystal diamond tools in ductile mode cutting of silicon. J. Mater. Processing Technol., 185 (2007): 24–30.

12.

Uddin

M. S.

Seah

K. H. W.

X. P.

Rahman

Liu

. Effect of crystallographic orientation on wear of diamond tools for nano-scale ductile cutting of silicon. Wear, 257 (2004): 751–759.

13.

Zong

W. J.

Sun

Cheng

. Design criterion for crystal orientation of diamond cutting tool. Diamond Rel. Mater., 18 (2009): 642–650.

14.

Casey

Wilks

. Some experiments to study turning tools using the scanning microscope. Int. J. Mach. Tool — Des. Res., 16 (1976): 13–22.

15.

Zong

W. J.

Cheng

Sun

Liang

Y. C.

. The ultimate sharpness of single-crystal diamond cutting tools — Part I: Theoretical analyses and predictions. Int. J. Mach. Tools Mf., 47 (2007): 852–863.

16.

Ding

Lim

G. C.

Cheng

C. K.

Butler

D. L.

Shaw

K. C.

Liu

Fong

W. S.

. Fabrication of a micro-size diamond tool using a focused ion beam. J. Micromech. Microengng, 18 (2008): 1–10.

17.

Biddut

A. Q.

Rahman

Neo

K. S.

Rezaur Rahman

K. M.

Sawa

Maeda

. Performance of single crystal diamond tools with different rake angles during micro-grooving on electroless nickel plated die materials. Int. J. Advd Mfg Technol., 33 (2007): 891–899.

18.

Shivpuri

Hua

Mittal

Srivastava

A. K.

. Microstructure—mechanics interactions in modelling chip segmentation during titanium machining. Ann. CIRP, Mfg Technol., 51 (1) (2002): 71–74.

Preliminary study of the effects of crystal orientation of a CVD monocrystalline diamond in micromilling of Ti—6Al—4V

Abstract

Abstract

Keywords

References