Development,evaluation,and selection of rapid tooling process chains for sand casting of functional prototypes

Abstract

This paper discusses the results obtained from studies on different rapid tooling process chains for improved design and manufacture of foundry equipment for sand casting of prototypes in final material for functional and pre-production tests of vehicles, using the three-dimensional printing process as core technology. Subsequently, while considering aspects such as time, cost, quality (accuracy and surface roughness), and tool life, a framework for evaluation and selection of the most suitable process chain in accordance to specific requirements is presented. Apart from only using these process chains for prototype manufacturing, initial results from a study to apply one of these process chains in automated sand casting full production is also presented. This research builds on an in-depth characterization of the accuracy and repeatability of a three-dimensional printing process.

Keywords

rapid tooling (RT)three-dimensional printing casting

References

Levy

G. N.

Schindel

Kruth

J.-P.

Rapid manufacturing and rapid tooling with layer manufacturing technologies, state of the art and future perspectives

Ann. CIRP, 2003, 52(2), 589–610.

Levy

G. N.

Schindel

Schleiss

Micari

Fratini

On the use of SLS tools in sheet metal stamping

Ann. CIRP, 2003, 52(1), 249–252.

Shi

Sun

Huang

Rapid manufacturing metal parts using SLS and vacuum pressure difference casting technologies. In Proceedings of the First International Conference on Advanced research in virtual and rapid prototyping (VRP), Leiria, Portugal, 1–4 October 2003, pp. 463–496.

Levy

G. N.

Schumacher

B. M.

Rapid prototyping of EPS models (expandable polystyrene) for ‘LostFoam’ castings. In Proceedings of the 36th CIRP International Seminar on Manufacturing systems, Saarbrücken, Germany, 3–5 June 2003, pp. 561–566.

Wohlers

Wohlers report, rapid prototyping, tooling & manufacturing state of the industry, 2005 (Wohlers Associates, Fort Collins, Colorado, USA).

Dieckhues

Rapid production of functional castings components

Casting SA, October 2005, 6(3), 35–38.

Ederer

Höchsmann

Patternless production of furan bonded sand moulds in rapid prototyping

Casting SA, December 2005, 6(4), 35–38.

Dimitrov

Van Wijck

Schreve

De Beer

An investigation of the capability profile of the three dimensional printing process with an emphasis on the achievable accuracy

Ann. CIRP, 2003, 52(1), 189–192.

Dimitrov

Van Wijck

Schreve

De Beer

On the achievable accuracy of the three dimensional printing process for rapid prototyping. In Proceedings of the First International Conference on Advanced research in virtual and rapid prototyping (VRP), Leiria, Portugal, 1–4 October 2003, pp. 575–582.

10.

Centner

Development of optimal process chains for sand casting of automotive prototype parts using layer manufacturing methods as core technology. Thesis Report, 2005, University of Stellenbosch, South Africa.

11.

Eckert

Investigation and design of optimised process chains using additive methods for sand casting of automotive parts. Thesis Report, 2005, University of Stellenbosch, South Africa.

12.

Anonymous. Product information from Z Corporation, available at: www.zcorp.com [4 June 2007].

13.

Dimitrov

De Beer

Developing capability profile for the three dimensional printing process

R & D J. SAIMechI, 2006, 22(3), 17–25.

14.

Dimitrov

Schreve

De Beer

Advances in three dimensional printing - state of the art and future perspectives

Rapid Prototyping J., 2006, 12(3), 136–147.

15.

Krouth

T. J.

Foundry tooling and metal castings in days. In Proceedings of the International Conference on Worldwide advances in rapid and high-performance tooling, 2002, EuroMold, Frankfurt, Germany.

16.

Ambos

Hoffmann

Krötzsch

Miersch

Pfisterer

Scheler

Effektivitätsstegerung durch Einsatz rechentechnischer Lösungen in der Arbeitsvorbereitung

Newspaper GIESSEREI, 10 October 2000, 87(10), 39–45.

17.

Chua

C. K.

Leong

K. F.

Lim

C. S.

Rapid prototyping, principles and applications, 2nd edition, 2003 (World Scientific, Singapore).

18.

Poli

Design for manufacturing, a structured approach, 1st edition, 2001 (Butterworth Heinemann, Oxford, UK).

19.

Campbell

Castings practice, 2004 (Elsevier Butterworth-Heinemann, Oxford, UK).

20.

Mueller

Siemer

Wohlers

Cast metal parts. In Wohlers report 2005: Rapid prototyping, tooling & manufacturing state of the industry, annual worldwide progress report, 2005, pp. 142–148 (Wohlers Associates, Fort Collins, Colorado, USA).