Characterization of machining of AISI 1045 steel over a wide range of cutting speeds. Part 2: Evaluation of flow stress models and interface friction distribution schemes
Free accessResearch articleFirst published online May, 2007
Characterization of machining of AISI 1045 steel over a wide range of cutting speeds. Part 2: Evaluation of flow stress models and interface friction distribution schemes
To ensure that the simulation of the orthogonal metal-cutting process yields accurate results, the material and frictional behaviours during simulation have to be defined accurately. Flow stress models are used extensively in the simulations of deformation processes occurring at high strains, strain rates, and temperatures. In this work, the Johnson-Cook, Maekawa et al., Oxley, El-Magd et al., and Zerilli-Armstrong flow stress models are evaluated. AISI 1045 steel is used as the workpiece material because it is well characterized. First, the predictive capability of these flow stress models is compared with the published experimental data at high strain rates and the modelling errors are quantified. Different friction conditions along the tool rake face are also discussed. Then the friction conditions based on results of scanning electron microscopy-energy-dispersive X-ray analysis from Part 1 are implemented together with other friction models. The material flow stress models and friction conditions are assessed using an updated Lagrangian finite element code simulating continuous chip formation over a range of cutting speeds. The assessment of these models is carried out for their accuracy in predicting the cutting force and shear angle with those obtained experimentally in order to draw conclusions regarding their comparative performance.
UsuiE.ShirakashiT.Mechanics of machining - from descriptive to predictive theory. In On the art of cutting metals-75 years later, 1982, PED-Vol. 7, pp. 13–35 (American Society of Mechanical Engineers, New York).
2.
MerchantM. E.Mechanics of the cutting processJ. Appl. Phys., 1945, 16, 267–318.
3.
NakayamaK.AraiM.TakeiK.Semiempirical equations for three components of resultant cutting forceAnn. CIRP, 1983, 30(1), 33–36.
4.
PalmerW. B.OxleyP. L. B.Mechanics of metal cuttingProc. Instn Mech. Engs, 1959, 173, 623–654.
5.
ChildsT. H. C.MaekawaK.ObikawaT.YamaneY.Metal machining: Theory and application, 2000, pp. 226–262 (Arnold, London).
6.
ChildsT. H. C.Material properties requirement in modelling metal machiningMachining Sci. Technol., 1998, 2(2), 303–306.
7.
KlameckiB. E.Incipient chip formation in metal cutting - a 3-D finite element analysis, PhD Thesis, University of Illinois at Urbana Champaign, Illinois, USA, 1973.
8.
IwataK.OsakadaK.TerasakaY.Process modeling of orthogonal cutting by the rigid-plastic finite element methodTrans. ASME J. Engng Mater. Technol., 1984, 106, 132–138.
9.
StrenkowskiJ. S.CarrollJ. T.IIIA finite element model of orthogonal metal cuttingTrans. ASME, J. Mfg Sci. Engng, 1985, 107, 349–354.
10.
ChildsT. H. C.MaekawaK.Computer-aided simulation and experimental studies of chip flow and tool wear in the turning of low alloy steels by cemented carbide toolsWear, 1990, 139, 235–250.
11.
ZhangB.BagchiA.Finite element simulation of chip formation and comparison with machining experimentTrans. ASME, J. Engng Industry, 1994, 116, 289–297.
12.
MarusichT. D.OrtizM.Modelling and simulation of high-speed machiningInt J. Numer. Meth. Engng, 1995, 38, 3675–3694.
13.
KlockeF.RaedtH.-W.HoppeS.2D-FEM simulation of the orthogonal high speed cutting processMachining Sci. Technol., 2001, 5(3), 323–340.
14.
GrzesikW.Determination of temperature distribution in the cutting zone using hybrid analytical-FEM techniqueInt. J. Mach. Tools Mf, 2006, 46(6), 651–658.
15.
OzelT.The influence of friction models on finite element simulations of machiningInt. J. Mach. Tools Mf., 2006, 46(6), 518–530.
SartkulvanichV.AltanT.Effects of flow stress and friction models in finite element simulation of orthogonal cutting - a sensitivity studyMachining Sci. Technol., 2005, 9, 1–25.
18.
OxleyP. L. B.Mechanics of machining: An analytical approach to assessing machinability, 1989, pp. 223–227 (Ellis Horwood, Chichester, West Sussex).
19.
MaekawaK.ShirakashiT.UsuiE.Flow stress of low carbon steel at high temperature and strain rate (part 2) - flow stress under variable temperature and variable strain rateBull. Japan Soc. Precision Engng, 1983, 17(3), 167–172.
20.
JohnsonG. R.CookW. H.A constitutive model and data for metals subjected to large strains, high strain rates and high temperature. In Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, 1983, pp. 541–547 (American Defense Preparedness Association, The Netherlands).
21.
ZerilliF. J.ArmstrongR. W.Dislocation-mechanices based constitutive relations for material dynamics calculationsJ. Appl. Physics, 1987, 61(6), 1816–1825.
22.
El-MagdE.TreppmannC.KorthäuerM.Constitutive modelling of CK45N, AlZnMgCu1.5 and Ti-6Al-4V in a wide range of strain rate and temperatureJ. Physique, 2003, 110, 141–146.
23.
JaspersS. P. F. C.DautzenbergJ. H.Material behaviour in conditions similar to metal cutting: Flow stress in the primary shear zoneJ. Mater. Processing Technol., 2002, 122(2–3), 322–330.
24.
ChildsT. H. C.RoweG. W.Physics in metal cuttingRep. Prog. Physics, 1973, 36(3), 223–288.
25.
NgE.-G.AspinwallD. K.BrazilD.MonaghanJ.Modelling of temperature and forces when orthogonally machining hardened steelInt. J. Mach. Tools Mf., 1999, 39, 885–903.
26.
McClainB.BatzerS.MaldonadoG. I.A numeric investigation of rake face stress distribution in orthogonal machiningJ. Mater. Processing Technol., 2002, 123, 114–119.
27.
XieL.-J.SchmidtJ.SchmidtC.BiesingerF.2D FEM estimate of tool wear in turning operationWear, 2005, 258, 1479–1490.
28.
ZorevN. N.Interrelationship between shear processes occurring along tool face and on shear plane in metal cutting. In Proceedings of the International Production Engineering Research Conference, Pittsburgh, Pennsylvania, USA, 1963, pp. 42–49 (ASME, New York).
29.
DirikoluM. H.ChildsT. H. C.MaekawaK.Finite element simulation of chip flow in metal machiningInt. J. Mech. Sci., 2001, 43, 2699–2713.
30.
PerssonU.ChandrasekaranH.MerstallingerA.Adhesion between some tool and work materials in fretting and relation to metal cuttingWear, 2001, 249, 293–301.
31.
GrzesikW.The influence of thin hard coatings on frictional behaviour in the orthogonal cutting processTribology Int., 2000, 33(2), 131–140.
32.
GrzesikW.Friction behaviour of heat isolating coatings in machining: Mechanical, thermal and energy-based considerationsInt. J. Mach. Tools Mf., 2003, 43(2), 145–150.
33.
ChildsT. H. C.DirikoluM. H.SammonsM. D. S.MaekawaK.KitagawaT.Experiments on and finite element modeling of turning free-cutting steels at cutting speeds up to 250 m/min. In Proceedings of the First French and German Conference on High Speed Machining, Metz, France, 1997, pp. 325–331 (University of Metz, France).
34.
DeVriesW. R.Analysis of material removal processes, 1992, pp. 39–77 (Springer, New York).
35.
DaviesM. A.YoonH.SchmitzT. L.BurnsT. J.KennedyM. D.Calibrated thermal microscopy of the tool-chip interface in machiningMachining Sci. Technol., 2003, 7(2), 167–190.
KalhoriV.LundbladM.LindgrenL. E.Numerical and experimental analysis of orthogonal metal cutting. In Proceedings of the 1997 International Mechanical Engineering Congress and Exposition, Manufacturing Science and Engineering, Dallas, Texas, USA, 1997, MED-Vol. 6, pp. 29–35 (American Society of Mechanical Engineers, New York).
38.
Metals handbook: Properties and selection: Iron and steels, 1990, 10th Edition, pp. 506–511 (American Society for Metals, Metals Park, Ohio).
39.
GrzesikW.NieslonyP.Prediction of friction and heat flow in machining incorporating thermophysical properties of the coating-chip interfaceWear, 2004, 256(1–2), 108–117.
