The use of thermal imaging,temperature and distortion models for machine tool thermal error reduction

Abstract

Research has shown that up to 75 per cent of the total machining error can be produced by thermal distortion. Thermal error compensation can provide an attractive solution to this accuracy problem. Research has shown that thermal error compensation can reduce thermal errors to an acceptable level, but the techniques adopted have had inherent disadvantages that make them impractical for general use. This paper describes a novel indirect measurement based thermal error compensation technique that overcomes the main difficulties of applying thermal compensation, making it practical and generally applicable. The technique makes extensive use of thermal imaging for rapid assessment of machine tool thermal behaviour and off-line development of the compensation models. To illustrate the use of the technique it is applied to the head slide of a vertical machining centre.

Keywords

machine tool accuracy thermal errors compensation thermal imaging

References

Push

A. V.

Prediction of thermal displacements in spindle units. Sov. Engng Res., 1985, 56(5), 15–19.

Reidman

L. G.

Determination of spatial displacement of the spindle axis on high precision machines. Sov. Engng Res., 1987, 58(11), 22–23.

Bryan

International status of thermal error research. Ann. CIRP, 1990, 39, 645–656.

McMurtry

Footprinting. In University of Huddersfield Short Course on Applied Metrology and Error Compensation Techniques for CNC Machine Tools, 1993, pp. 15–21.

McMurtry

Renishaw's advanced machining project, machining to a traceable standard using artefact comparison techniques in an unmanned system. In University of Huddersfield Short Course on Applied Metrology and Error Compensation Techniques for CNC Machine Tools, 1993, pp. 22–34.

Kreng

V. B.

Liu

C. R.

Chu

C. N.

A kinematic model for machine tool accuracy characterisation. Int. J. Adv. Mfg Technol., 1994, 9(2), 79–86.

Ziegert

Kalle

Error compensation in machine tools: A neural network approach. J. Intell. Mfg, 1994, 5, 143–151.

Salsbury

J. G.

Uncertainty of the co-ordinate measurement process due to unwanted asperities. In Proceedings of the ASPE Annual Meeting, 1996, Vol. 14, pp. 664–667.

Allen

J. P.

A general approach to CNC machine tool thermal error reduction. PhD thesis, University of Huddersfield, 1997.

10.

Forsythe

G. E.

Malcolm

M. A.

Moler

Computer Methods for Mathematical Computations, Prentice-Hall Series in Automatic Computation, 1977 (Prentice-Hall, Englewood Cliffs, New Jersey).