Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd: Yag (neodymium-doped yttrium aluminium garnet) laser

Abstract

A 550W neodymium-doped yttrium aluminium garnet (Nd:YAG) pulsed laser was used in the solid freeform fabrication (SFF) process to form fully dense sintered parts. Tool steel powder was chosen due to its wide acceptance in the tool-making industry. Unlike many processes applying either thermoplastic binder or metals of low melting points in the powder mixture, this process enables a direct fusion of material to solid parts without a further post-processing step. This paper presents a methodology and the results of high-power laser sintering of tool steel powder. The investigation includes the effects of various process parameters on the fully dense laser sintering results on a single bead and single layer and the related scan strategy to build up solid cubes. This process could eventually produce pre-forms with complex material structures rather than finished tools or parts.

Keywords

laser sintering Nd:YAG laser tool steel tooling laser cladding

Get full access to this article

View all access options for this article.

References

Kruth

J. P.

M. C.

Nakagawa

Progress in additive manufacturing and rapid prototyping. Ann. CIRP, Mfg Technol., 1998, 47 (2), 525–540.

Meiners

Wissenbach

Poprawe

Direct selective laser sintering of steel powder. In Proceedings of the LANE′97, University of Erlangen, Germany, September 1997, pp. 615–622.

Hauser

Childs

T. H. C.

Dalgarno

K. W.

Eane

R. B.

Atmospheric control during direct selective laser sintering of stainless steel 314S powder. In Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, August 1999, pp. 273–280.

Morgan

Sutcliffe

C. J.

O'Neill

Experimental investigation of nanosecond pulsed Nd:YAG laser remelted pre-placed powder beds. Rapid Prototyping J., 2001, 7 (3), 159–172.

O'Neill

Sutcliffe

C. J.

Morgan

Hon

K. K. B.

Investigation of short pulse Nd:YAG laser interaction with stainless steel powder beds. In Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, August 1998, pp. 147–160.

Bourell

D. L.

Marcus

H. L.

Barlow

J. W.

Beamen

J. J.

Selective laser sintering of metals and ceramics. Int. J. Powder Metallurgy, 1992, 28 (4), 369–381.

Weerasinghe

V. M.

Steen

W. M.

Computer simulation model for laser cladding. In Transport Phenomena in Materials Processing, 1983, p. 15 (American Society of Mechanical Engineers, New York).

Weerasinghe

V. M.

Steen

W. M.

Laser cladding with pneumatic powder delivery. In Applied Laser Tooling (complied by Soares

O. D. D.

Perez-Amor

), 1987, p. 183 (Martinus Nijhoff Publishers, Dordrecht, The Netherlands).

Murphy

Lee

Steen

W. M.

Studies in rapid prototyping by laser-surface cladding. In ICALEO 93—Laser Materials Processing (complied by Denney

Miyamto

Mordike

B. L.

), 1994, p. 882 (SPIE and International Society of Optical Engineering, Bellingham, Washington).

10.

Karapatis

N. P.

van Griethuysen

J.-P. S.

Glardon

Direct rapid tooling: A review of the current research. Rapid Prototyping J., 1998, 4 (2), 77–89.

11.

Griffith

M. L.

Keicher

D. M.

Atwood

C. L.

Romero

J. A.

Smugeresky

J. E.

Harwell

L. D.

Greene

D. L.

Free form fabrication of metallic components using laser engineered net shaping (LENS^TM). In Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, August 1996, pp. 125–131.

12.

Lewis

G. K.

Milewski

Thoma

D. B.

Nemec

R. B.

Properties of near-net shape metallic components made by the directed light fabrication process. In Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, August 1997, pp. 513–520.

13.

Mazumder

Choi

Nagarathnam

The direct metal deposition of H 13 tool steels for 3-D components. J. Metals, May 1997, 49, 55–60.

14.

Klocke

Wirtz

Meiners

Direct manufacturing of metal prototypes and prototype tools. In Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, August 1996, pp. 141–148.

15.

Dave

V. R.

Matz

Eagar

Electron beam solid freeform fabrication of metal parts. In Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, August 1995, pp. 64–71.

16.

Wohlers

Wohlers Report—Annual Worldwide Progress Report, 2001.

17.

Niu

H. J.

Chang

I. T. H.

Selective laser sintering of gas atomized M2 high speed steel powder. J. Mater. Sci., 2000, 35, 31–38.