Vibration analysis of rotors for the identification of shaft misalignment Part 1: Theoretical analysis

Abstract

Shaft misalignment in machinery causes preload forces to be generated in couplings which are then transmitted to the different machine components, thus reducing their lifetime. Shaft misalignment is a major cause of vibration in machines. Based on tests on coupling stiffness, a new coupling finite element stiffness matrix has been deduced. This has been used in the finite element analysis of a two-rotor system connected by a flexible coupling, to calculate the mechanical vibration resulting from mixed angular and parallel shaft misalignments with residual unbalance. The calculated vibration spectra were determined for two flexible couplings: a three-pin Renold coupling and a three-jaw Lovejoy coupling. The results and analysis indicate that the vibration generated by shaft misalignment is caused by the variation in coupling stiffness on rotation, and that the forcing frequencies generated are harmonics of the shaft's speed and directly depend on the frequency of the variation in coupling stiffness. In addition, the amplitudes of the measured vibratory components were found to rely directly upon the frequency response function that is related to the coupling and measurement points.

Keywords

rotor vibration analysis coupling misalignment condition monitoring

Get full access to this article

View all access options for this article.

References

Piotrowsk

Shaft Alignment Handbook, 1986 (Marcel Dekker, New York).

Al-Hussain

K. M.

Redmond

Dynamic response of two rotors connected by a rigid mechanical coupling with parallel misalignment. J. Sound Vibr., 2002, 249(3), 483–98.

Dewell

D. L.

Mitchell

L. D.

Detection of a misaligned disk coupling using spectrum analysis. Trans. ASME, J. Vibr., Acoust., Stress and Reliability Des., 1984, 106, 9–15.

Marangoni

R. D.

Vibration analysis of a motor-flexible coupling-rotor system subject to misalignment and unbalance. Part I: Theoretical model and analysis. J. Sound Vibr., 1994, 176(5), 663–679.

Marangoni

R. D.

Vibration analysis of a motor-flexible coupling-rotor system subject to misalignment and unbalance. Part II: Experimental validation. J. Sound Vibr., 1994, 176(5), 681–691.

Sekhar

A. S.

Prabhu

B. S.

Effects of coupling misalignment on vibrations of rotating machinery. J. Sound Vibr., 1995, 185(4), 655–671.

Simon

Prediction of vibration behaviour of large turbomachinery on elastic foundations due to unbalance and coupling misalignment. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1992, 206(C1), 29–39.

Bachschmid

Pennachi

Vania

Identification of multiple faults in rotor systems. J. Sound Vibr., 2002, 254(2), 327–366.

Nelson

H. D.

McVaugh

J. M.

The dynamics of rotor-bearing systems using finite elements. Trans. ASME, J. Engng for Industry, 1976, 98(2), 593–600.

10.

Gibbons

C. B.

Coupling misalignment forces. In Proceedings of the Fifth Turbomachinery Symposium, Gas Turbine Laboratories, Texas A & M University, College Station, Texas, 1976, pp. 111–116.

11.

Schwerdlin

Reaction forces in elastomeric couplings. Mach. Des., 1979, 51(16), 76–79.

12.

Ramírez

D. E.

Analysis of the vibratory behaviour of rotating machines. Master's thesis, Universidad de Concepción, Chile, 2003.