Rotational Motion Control of a Washing Machine Using Electrorheological Clutches and Brakes

Abstract

In this work, a rotational motion control of a washing machine featuring an electrorheological (ER) clutch/brake actuators is investigated. After analysing the field-dependent transmission and braking torques of the actuator on the basis of Bingham model, two sets of ER clutch/brake actuators are manufactured. The dynamic model of the actuators is then formulated by considering time constants. Subsequently, the actuators are applied to a small-sized pulsator type washing machine for rotational motion control. The control system model represented by spin-basket and pulsator motions is established and PID controllers are designed for two motions. The controllers are experimentally realized for washing and dehydrating motions under various loads. In addition, durability test for the washing motion control has been undertaken to demonstrate practical feasibility.

Keywords

electrorheological fluid electrorheological clutch/brake rotational motion control PID controller washing machine

Get full access to this article

View all access options for this article.

References

Bonnecaze

R. T.

Brady

J. T.

Yield stresses in electro rheological fluids. J. Rheol., 1992, 36 (1), 73–113.

Stairway

Sproston

J. L.

El-Wahed

A. K.

Application of electrorheological fluids in vibration control: A survey. Smart Mater. Struct., 1996, 5 (4), 464–482.

Wereley

N. M.

Nondimensional analysis of semi-active electrorheological and magnetorheological dampers using approximate parallel plate models. Smart Mater. Struct., 1998, 5, 732–743.

Lindler

Wereley

N. M.

Analysis and testing of electrorheological bypass dampers. J. Intell. Mater. Syst. Struct., 1999, 10 (5), 363–376.

Wereley

N. M.

Kamath

G. M.

Idealized hysteresis modeling of electrorheological and magnetorheological dampers. J. Intell. Mater. Syst. Struct., 1998, 9 (8), 642–649.

Sims

N. D.

Stanway

Peel

D. J.

Bullough

W. A.

Johnson

A. R.

Controllable viscous damping: An experimental study of an electrorheological long-stroke damper under proportional feedback control. Smart Mater. Struct., 1999, 8, 601–615.

Choi

S. B.

Choi

Y. T.

Chang

E. G.

Han

S. J.

Kim

C. S.

Control characteristics of a continuously variable ER damper. Mechatronics, 1998, 8, 143–161.

Choi

S. B.

Choi

Y. T.

Park

D. W.

A sliding mode control of a full-car electrorhelogical suspension system via hardware-in-the-loop simulation. ASME J. Dyn. Syst. Meas. Control, 2000, 122 (1), 202–209.

Williams

E. W.

Rigby

S. G.

Sproston

J. L.

Stanway

Electrorheological fluids applied to an automotive engine mount. J. Non-Newton. Fluid Mech., 1993, 47, 221–238.

10.

Choi

S. B.

Song

H. J.

Vibration control of a passenger vehicle utilizing a semi-active ER engine mount. Vehicle Syst. Dyn., 2002, 37 (3), 193–216.

11.

Choi

S. B.

Park

Y. K.

Cheong

C. C.

Active vibration control of intelligent composite laminated structures incorporating an electro-rheological fluid. J. Intell. Mater. Syst. Struct., 1996, 7 (4), 411–419.

12.

Carlson

Duclos

T. F.

ER fluids clutches and brakes - fluid property and mechanical considerations. In Proceedings of the Second International Conference on ER Fluids, Raleigh, NC, 1990, pp. 353–367.

13.

Stangroom

J. E.

Tension control using ER fluids - a case study. In Proceedings of the Second International Conference on ER Fluids, Raleigh, NC, 1990, pp. 419–425.

14.

Stevens

N. G.

Sproston

J. L.

Tanway

An experimental study of electro-rheological torque transmission. ASME J. Dyn. Syst. Meas. Control, 1988, 110 (1), 182–188.

15.

Johnson

A. R.

Makin

Bullough

W. A.

Electro-rheological catch/clutch: Inertial simulations. In Proceedings of the Fourth International Conference on ER Fluids, Feldkirch, Austria, 1993, pp. 493–515.

16.

Oravsky

Krc-Jediny

Steady-state solution of an ER clutch at harmonic load. In Proceedings of the Fifth International Conference on ER Fluids, MR Suspensions and Associated Technology, Sheffield, UK, 1995, pp. 64–71.

17.

Choi

S. B.

Cheong

C. C.

Kim

G. W.

Feedback control of tension in a moving tape using an ER brake actuator. Mechatronics, 1997, 7 (1), 53–66.

18.

Han

S. S.

Choi

S. B.

Cheong

C. C.

Position control of X-Y table mechanism using electrorheological clutch. Mech. Mach. Theory, 2000, 35 (11), 1563–1577.

19.

Kim

J. H.

Motion control of washing machine using ER clutches and brakes. MS Thesis, Department of Mechanical Engineering, Inha University, Korea, 1998.

20.

Conrad

D. C.

Soedel

On the problem of oscillatory walk of automatic washing machines. J. Sound Vib., 1995, 188 (3), 301–314.

21.

Ogata

Modern Control Engineering, 1990 (Prentice Hall International, Inc., Englewood Cliffs, NJ).