Measurement and interpretation of the heat transfer coefficients of metal foams

Abstract

The heat transfer characteristics of FeCrAlY (an iron-based alloy with a melting point of 1510°C sintered foams are presented. The foams have open cells and hollow cell ligaments. The foam samples had a range of cell sizes (1-3 mm) and relative densities (4.6-12.5 percent). Foam cores sandwiched between two conductive substrates were subjected to forced air convection with a constant input heat flux. The volumetric heat transfer coefficient is shown to depend on the effective porosity. Heat transfer is predominantly due to the increased flow mixing that the foam structure promotes. With higher-conductivity materials, the foam also acts to increase the heat transfer by providing an extended surface area, but this is not a strong effect in FeCrAlY foams owing to the low thermal conductivity of 16 W/m K. The FeCrAlY foam is compared with copper foam, and the latter effect is more significant.

Keywords

metal foams heat transfer measurement techniques heat transfer coefficient porosity conductivity

Get full access to this article

View all access options for this article.

References

Younis

L. B.

Viskanta

Experimental determination of the volumetric heat transfer coefficient between a stream of air and ceramic foam. Int. J. Heat Mass Transfer, 1993, 36 (6), 1425–1434.

Hwang

J.-J.

Hwang

G.-J.

Yeh

R.-H.

Chao

C.-H.

Measurement of interstitial convective heat transfer and frictional drag for flow across metal foams. Trans. ASME, February, 2002, 124, 120–129.

Lee

D.-Y.

Vafai

Analytical characterization and conceptual assessment of solid and fluid temperature differentials in porous media. Int. J. Heat Mass Transfer, 1999, 42, 423–435.

Hunt

M. L.

Tien

C. L.

Effects of thermal dispersion on forced convection in fibrous media. Int. J. Heat Mass Transfer, 1998, 31 (2), 301–309.

Zhao

C. Y.

T. J.

Hodson

H. P.

Thermal radiation in ultralight metal foams with open cells. Int. J. Heat Mass Transfer, 2004, 47, 2927–2939.

Zhao

C. Y.

Thermal transport in cellular metal foams with open cells. PhD dissertation, University of Cambridge, June 2003.

Calmidi

V. V.

Transport phenomena in high porosity fibrous metal foams. PhD thesis, Mechanical Engineering, University of Colorado, 1998.

T. J.

Stone

H. A.

Ashby

M. F.

Heat transfer in open-celled metal foams. Acta Mater., 1998, 46, 3619–3635.

Kim

Fuller

A. J.

Hodson

H. P.

T. J.

An experimental study of thermal transport in lightweight metal foams at high Reynolds numbers. In Proceedings of International Symposium on Compact Heat Exchangers, Grenoble, France, August 2002, pp. 227–232.

10.

Coleman

H. W.

Steele

W. G.

Experimentation and Uncertainty Analysis for engineers, 2nd edition, 1999 (John Wiley, New York).

11.

Bejan

Convection Heat Transfer, 2nd edition, 1995 (John Wiley, New York).