The effect of three-dimensional crack growth on the force distribution and meshing stiffness of a spur gear: Ideal and misaligned contacts

Abstract

This article presents a routine for prediction of the crack growth path in gears. Crack simulation helps in determining failure modes and crack detecting by vibration monitoring. To simulate crack propagation an effective method is developed by which the meshing force is calculated based on the compliance of meshing teeth in every stage of crack growth. In this method the compliance matrix of the tooth is calculated using three-dimensional boundary element analysis without the need for simultaneously modelling two meshing gears. The force distribution on the contact area is then calculated using Hertz theory and compliance matrices of meshing teeth. The method is used in prediction of the crack propagation path, meshing force, and meshing stiffness for two cases of ideal and misaligned meshing of a spur gear set. The crack propagation path is very different in the two cases of meshing and affects force distribution on a contact zone. Meshing stiffness reduces as crack propagates but the amount of reduction depends on the position of the contact line and crack propagation path.

Keywords

three-dimensional crack meshing stiffness meshing force misalignment spur gear

Get full access to this article

View all access options for this article.

References

Lewicki

D. G.

Sane

Drago

Wawrzynek

, ‘Three-dimensional gear crack propagation studies’ (1998): NASA, Technical Memorandum (USA), 1998-208827.

Ural

Heber

Wawrzynek

Ingraffea

Lewicki

D. G.

Neto

B. C.

, ‘Three-dimensional, parallel, finite element simulation of fatigue crack growth in a spiral bevel pinion gear’ Eng. Fract. Mech. 72 (2005): 1148–1170.

Glodez

Pehan

Flasker

, ‘Experimental results of the fatigue crack growth in a gear tooth root’ Int. J. Fatigue 20 (1998): 669–675.

Lewicki

D. G.

, ‘Gear crack propagation path studies-guideline for ultra-safe design’ J. Am. Helicopter Soc. 47 1 (2002): 64–72.

Lewicki

D. G.

Handschuh

R. F.

Spievak

L. E.

Wawrzynek

P. A.

Ingraffea

A. R.

, ‘Consideration of moving tooth load in gear crack propagation predictions’ ASME J. Mech. Des. 123 (2001): 118–124.

version 2.6 (New York, USA: Cornell University 2003).

Spievak

L. E.

Wawrzynek

P. A.

Ingraffea

A. R.

Lewicki

D. G.

, ‘Simulating fatigue crack growth in spiral bevel gears’ Eng. Fract. Mech. 68 (2001): 53–76.

Vijayakar

, ‘A combined surface integral and finite contact problem element solution for a three-dimensional’ Int. J. Numer. Methods Eng. 31 (1991): 525–545.

10.

Litvin

F. L.

Chen

J. S.

Handschuh

R. F.

, ‘Application of finite element analysis for determination of load share, real contact ratio, precision of motion, and stress analysis’ ASME J. Mech. Des. 118 (1996): 561–567.

11.

Wang

, Theory of elasticity (New York, USA: McGraw-Hill 1953).

12.

Coy

Chao

, ‘A method of selecting grid size to account for Hertz deformation in finite element analysis of spur gears’ ASME J. Mech. Des. 104 (1982): 759–766.

13.

Karnopp

D. C.

Rosenberg

R. C.

, System dynamics: a unified approach (New York, USA: John Wiley & Sons, Inc. 1990).

14.

Stasa

, ‘Applied finite element analysis for engineers’ (New York, USA: CBS College Publisher 1985).

15.

Johnson

E. R.

Beer

F. P.

, Mechanics of materials (New York, USA: McGraw-Hill 1985).

16.

Kaung

Yang

, ‘An estimate of mesh stiffness and load sharing ratio of a spur gear pair’ (1992).

17.

Yang-Tao

Cong-Xin

Wei

Chang-Hua

, ‘A finite-element-based study of the load distribution of a heavily loaded spur gear system with effects of transmission shafts and gear blanks’ ASME J. Mech. Des. 125 (2003): 625–631.

18.

, ‘Finite element analysis for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and tooth modifications’ Mech. Mach. Theory 42 (2007): 88–114.

19.

, ‘Effects of machining errors, assembly errors and tooth modifications on load capacity, load-sharing ratio and transmission error of a pair of spur gears’ Mech. Mach. Theory 42 (2007): 698–726.