This article is the second of a set and describes the results of wake traverses and droplet measurements in a cascade of steam turbine improved nozzle blade profiles. In the course of expansion of steam in turbines the state path crosses the saturation line, the fluid nucleates become wet, and the succeeding stages have to operate on a two-phase mixture. The formation and subsequent behaviour of the liquid phase lowers the performance of turbine wet stages. To study these problems systematically the turbine two-phase flow conditions need to be reproduced realistically, which can be done under blow down conditions. Following earlier studies of typical profiles in nucleating steam the performance of a new design of blades is presented. A substantially improved aerodynamic performance is achieved by the new profile.
BakhtarF.MamatZ. A.JadayelO. C.MahpeykarM. R., ‘On the performance of a cascade of improved turbine nozzle blades in nucleating steam. Part 1: Surface pressure distributions’ Proc. IMechE, Part C: J. Mechanical Engineering Science223 C8 (2009): 1911–1922 DOI: 10.1243/09544062JMES1255.
2.
BarbucciP.CarboneC.DonatiniF.MazzocchiL.VergaM., ‘Steam turbine flow field and steam quality measurements’ (1993) ASME Power Division Publication PWR-21.
3.
BarbucciP.CarboneC.MazzocchiL.VergaM., ‘Wet steam measurements in industrial turbines. In Proceedings of the 5th International Conference on Multiphase flow in industrial plants, Amalfi, Italy, September 1996, pp. 419–430.
4.
BohnD. E.SürkenN.KreitmeierF., ‘Nucleation phenomena in a multi-stage low pressure steam turbine’ Proc. IMechE, Part A: J. Power and Energy217 A4 (2003): 453–463 DOI: 10.1243/095765003322315513.
5.
DibeliusG. H.MertensK.PittR. V.StraufE., ‘Investigation of wet steam flow in turbines. In Proceedings of the IMechE Conference on Turbomachinery - efficiency prediction and improvement, Cambridge, 1986–7, paper C271/87, pp. 135–143, (Mechanical Engineering Publications, London).
6.
FeldbergL. A.PovarovO. A.SemenovV. N.PopovC. A., ‘Dispersion and steam wetness measurements in the turbine using optical probe. In Proceedings of the VGB/EPRI Conference on Steam chemistry, Freiburg, Germany, June 1999.
7.
GardzilewiczA.KolovratnikM.WróblewskiW.MarchinkowskiS.PetrV.DykasS., ‘Experimental and theoretical investigation of steam condensation in LP part of a large power turbine. In Proceedings of the 7th European Turbomachinery Conference, Athens, March 2007, paper no. 059.
8.
GerberA. G.SiggR.VölkerL.CaseyM. V.SürkenN., ‘Predictions of non-equilibrium phase transition in a model low-pressure steam turbine’ Proc. IMechE, Part A: J. Power and Energy221 A6 (2007): 825–835 DOI: 10.1243/09576509JPE456.
9.
GerschützW.CaseyM.TruckenmüllerF., ‘Experimental investigation of flow instabilities in the last stage of a low pressure model steam turbine during windage. In Proceedings of the 6th European Turbomachinery Conference, Lille, 2005, paper 036-08/177.
10.
HallerB. R.UnsworthR. G.WaltersP. T.LordM. J.MitchellJ. M. Ed., ‘Wetness measurements in a model multistage low pressure steam turbine’ (1989).
11.
HeslerS. H.MaurerR. H.LibersonA. S.McCloskeyT. H., ‘Technology for field measurement of condensed steam in LP turbines. In Proceedings of the VGB/EPRI Conference on Steam chemistry, Freiburg, Germany, June 1999.
12.
KleitzA.LaaliA. R.CourantJ. J.MitchellJ. M. Ed., ‘Fog droplet size measurements and calculation in steam turbines’ (1989) Conference Proceedings.
13.
KreitmeierF.SchlachterW.SmutnyJ., ‘An investigation of flow in a low pressure wet steam model steam turbine and its use for determining wetness losses’ (1979).
14.
LaaliA. R.CourantJ. J.KleitzA., ‘Calculation and measurement of fog droplet size. Comparison between nuclear and fossil fired turbines. In Proceedings of the International Joint Power Generation Conference on Design repair and refurbishment of steam turbines, San Diego, California, October 1991, ASME Power Division Publication PWR-13, pp. 133–138 (American Society of Mechanical Engineers, New York).
15.
MooreM. J.SculpherP., ‘Conditions producing concentrated erosion in large steam turbines. Proc. Instn Mech. Engrs, Conference Proceedings, 1969–70, 184(3G(III)), 45–56. DOI: 10.1243/PIME_CONF_1969_184_202_02.
16.
PetrV.KolovratnikM., ‘Diagnostics of wet steam in LP steam turbines. In Proceedings of the 5th European Conference on Turbomachinery, Prague, Czech Republic, 2003, pp. 687–698.
17.
RossM. M.SpratlingM. W.KirklandC. B.StoreyP. J., ‘Measurement of microfog wetness in a model steam turbine using a miniature optical spectral extinction probe. In Proceedings of the IMechE Conference on Optical methods and data processing in heat and fluid flow, April 1994, paper C485/012 (Mechanical Engineering Publications, London).
18.
SakamotoT.NagaoS.TanumaT., ‘Investigation of wet steam flow for steam turbine repowering. In Proceedings of the International Joint Power Generation Conference on Steam turbine - generator developments for the power generation industry, Atlanta, Georgia, 1992, ASME Power Division Publication PWR-18, pp. 33–40 (American Society of Mechanical Engineers, New York).
19.
SeiboldA.StetterH., ‘Investigating condensation process in low pressure turbines with an improved optical probe. In Proceedings of the International Joint Power Generation Conference, New Orleans, 4–7 June 2001, vol. 2, pp. 291–300 (American Society of Mechanical Engineers, New York).
20.
SettleJ.ArmstrongC., ‘The determination of stagnation enthalpy profiles in wet steam turbines’ (1979) paper C139/79.
21.
TanumaT.SakamotoT., ‘The removal of water from steam turbine stationary blades by suction slots’ (1991) paper C423/022.
22.
StastnyM., ‘Structure of secondary liquid phase downstream of moving blades in LP cylinder stages of steam turbines’ (1979).
23.
VolkerL.CaseyM.NeefM.StüerH., ‘The flow field and performance of a model low pressure steam turbine. In Proceedings of the 6th European Turbomachinery Conference, Lille, 2005, paper 22-05/43.
24.
WaltersP., ‘Wetness and efficiency measurements in L.P. turbines with an optical probe as an aid to improving performance’ ASME paper 85-JPGC-GT-9.
25.
WaltersP. T.MitchellJ. M. Ed., ‘Improving the accuracy of wetness measurements in generating turbines by using a new procedure for analysing optical transmission data’ (1989) Conference Proceedings.
26.
YoshidaK.MasuzawaC.KishimotoM., ‘Development of measuring techniques and measurement on wet steam for steam turbine’ (1990) ASME Power Division Publication PWR-10.
27.
BakhtarF. Ed., ‘Special issue on wet steam’ Proc. IMechE, Part C: J. Mechanical Engineering Science218 C8 (2004): 811–899.
28.
BakhtarF. Ed., ‘Special issue on wet steam - part 2’ Proc. IMechE, Part C: J. Mechanical Engineering Science219 C12 (2005): 1301–1443.
29.
BakhtarF.WebbR. A.Shojaee-FardM. H.SirajM. A., ‘An experimental facility for studies of nucleating and steam flows in turbine blading’ (1991) paper C423/003.
30.
BakhtarF.WebbR. A.Shojaee-FardM. H.SirajM. A., ‘An investigation of nucleating flows of steam in a cascade of blading’ ASME J. Fluids Eng.115 (1993): 128–134.
31.
BakhtarF.EbrahimiM.WebbR. A., ‘An investigation of nucleating flows of steam in a cascade of blading - wake traverses’ ASME J. Fluids Eng.116 (1994): 121–127.
32.
BakhtarF.WebbR. A.Shojaee-FardM. H.SavageR. A.ForuyaO. Ed., ‘An investigation of nucleating flows of steam in a cascade of blading - effect of overall pressure ratios. In Proceedings of the Cavitation and Multiphase Flow Forum ASME Fluids Engineering Conference, Washington, 1993, June 20–24, FED 153, pp. 205–208.
33.
BakhtarF.MahpeykarM. R.AbbasK. K., ‘‘An investigation of nucleating flow of steam in a cascade of turbine blading - theoretical treatment’ Trans. ASME, J. Fluids Eng.117 (1995): 138–144.
34.
BakhtarF.EbrahimiM.WebbR. A., ‘On the performance of a cascade of turbine rotor tip section blading in nucleating steam. Part 1: Surface pressure distributions’ Proc. IMechE, Part C: J. Mechanical Engineering Science209 C2, 115–124 DOI: 10.1243/PIME_PROC_1995_209_131_02.
35.
BakhtarF.EbrahimiM.BamkoleB. O., ‘On the performance of a cascade of turbine rotor tip section blading in nucleating steam. Part 2: Wake traverses’ Proc. IMechE, Part C: J. Mechanical Engineering Science209 C3 (1995): 169–177 DOI: 10.1243/PIME_PROC_1995_ 209_140_02.
36.
BakhtarF.MahpeykarM. R., ‘On the performance of a cascade of turbine rotor tip section blading in nucleating steam. Part 3: Theoretical treatment’ Proc. IMechE, Part C: J. Mechanical Engineering Science211 C3 (1997): 195–210 DOI: 10.1243/0954406971521773.
37.
BakhtarF.MashmoushyH.JadayelO. C., ‘Calibration characteristics of a three-hole probe and a static tube in wet steam’ Int. J. Heat Fluid Flow22 (2001): 537–542.
38.
BakhtarF.MashmoushyH.BuckleyJ. R., ‘On the performance of a cascade of turbine rotor tip section blading in wet steam. Part 1: Generation of wet steam of prescribed droplet sizes’ Proc. IMechE, Part C: J. Mechanical Engineering Science211 C7 (1908): 519–529 DOI: 10.1243/095440697152.
39.
BakhtarF.MashmoushyH.JadayelO. C., ‘On the performance of a cascade of turbine rotor tip section blading in wet steam. Part 2: Surface pressure distributions’ Proc. IMechE, Part C: J. Mechanical Engineering Science211 C7 (1917): 531–540 DOI: 10.1243/ 095440697152.
40.
BakhtarF.MashmoushyH.JadayelO. C., ‘On the performance of a cascade of turbine rotor tip section blading in wet steam. Part 3: Wake traverses’ Proc. IMechE, Part C: J. Mechanical Engineering Science211 C8 (2014): 639–648 DOI: 10.1243/095440697152.
41.
BakhtarF.RassamS. Y.ZhangG., ‘On the performance of a cascade of turbine rotor tip section blading in wet steam. Part 4: Droplet measurements’ Proc. IMechE, Part C: J. Mechanical Engineering Science213 C4 (1999): 343–353 DOI: 10.1243/0954406991522301.
42.
BakhtarF.HensonR. J. K.MashmoushyH., ‘On the performance of a cascade of turbine rotor tip section blading in wet steam. Part 5: Theoretical treatment’ Proc. IMechE, Part C: J. Mechanical Engineering Science220 C4 (2006): 457–472 DOI: 10.1243/09544062JMES151.
43.
SteltzW. G.LeeP. K.LindsayW. T.SteltzW. E.DonaldsonA. M. Ed., ‘The verification of concentrated impurities in low pressure steam turbines’ Aerothermodynamics of steam turbines (Washington, DC: ASME Winter Annual Meeting 1981): 73–82.
44.
JonasO.DooleyR. B., ‘Impurity concentration processes in steam turbines. In Proceedings of the VGB/EPRI Conference on Steam Chemistry, Freiburg, Germany, June 1999, pp. 9.1–9.26, EPRI, TR-114837, August 2000.
45.
BakhtarF.HensonR. J. K., ‘A re-examination of the effect of impurities on condensing flows of steam. In Proceedings of the VGB/EPRI Conference on Steam chemistry, Freiburg, Germany, June 1999, pp 12.1–12.10, EPRI, TR-114837, August 2000.
46.
BuckleyJ. R.WintertonR. H. S., ‘The role of heterogeneous nucleation in the steam condensation process. In Proceedings of the VGB/EPRI Conference on Steam chemistry, Freiburg, Germany, June 1999, pp 13.1–13.15, EPRI, TR-114837, August 2000.
47.
Van de HulstH. C., Light scattering by small particles (London: Dover1981).
48.
PendorfR. B., ‘New table of total mie scattering coefficients for spherical particles of real refractive indices’ J. Opt. Soc. Am.47 (1957): 1010–1015.
