The characteristics of high power fibre laser welding

Abstract

Laser welding has an ever growing role in manufacturing technology. Keyhole laser welding is the most important laser welding process in metal industry when exceeding the 1 mm weld penetration. This process uses efficiently the high energy density of a laser beam to vaporize and melt materials, thus producing a keyhole in the material via which the energy is brought to it. The requirements from customer side and the development of new materials have been giving justification for the development of new laser types suitable for material processing with ever higher power values. In contrast, the development of laser technologies has made it possible to build more powerful lasers with excellent beam properties and good electrical efficiency. New laser sources with good absorption and beam quality make the laser welding even more efficient when throughput and efficiency are considered. They show their ability to produce narrower welds with lower line energy. However, the validation of actual keyhole shape, size, and behaviour against the models is still lacking because of the difficulties in performing the measurements of the actual dimensions. It has been shown that the better the beam quality the higher the welding speed. When welding with high power, good beam quality, and wavelength close to 1000 nm, there are some obstacles to overcome, which are caused by high absorption and power density. Typically, problems, such as thermal lensing, can be avoided with proper parameter and tool selection. Typically, the size of the keyhole is according to the focal point size, and the stability of the keyhole plays a major role when considering the ability of the laser welding process to produce high quality welds.

Keywords

laser welding fibre laser high power laser weldability

Get full access to this article

View all access options for this article.

References

Göbel

Brenner

Beyer

, ‘New application possibilities for fiber laser welding’ In Proceedings of the 26th International Conference on Applications of lasers and electro-optics, ICALEO2007, Laser Institute of America, Orlando, USA, 29 October–1 November 2007, pp. 102–108.

Gedicke

Olowinsky

Artal

Gillner

, ‘Influence of temporal and spatial laser power modulation on melt pool dynamics’ In Proceedings of the 26th International Conference on Applications of lasers and electro-optics, ICALEO2007, Laser Institute of America, Orlando, USA, 29 October–1 November 2007, pp. 816–822.

Vollertsen

Thomy

, ‘Welding with fiber lasers from 200 to 17000 W’ In Proceedings of the 24th International Conference on Applications of lasers and electro-optics, ICALEO2005, Laser Institute of America, Miami, USA, 31 October–3 November 2005, pp. 254–263.

Kinoshita

Mizutani

Kawahito

Katayama

, ‘Phenomena of welding with high-power fiber laser’ In Proceedings of the 25th International Conference on Applications of lasers and electro-optics, ICALEO2006, Laser Institute of America, Scottsdale, USA, 30 October–2 November 2006, pp. 535–542.

Verhaeghe

Hilton

, ‘The effect of spot size and laser beam quality on welding performance when using high-power continuous wave solid-state lasers’ In Proceedings of the 24th International Conference on Applications of lasers and electro-optics, ICALEO2005, Laser Institute of America, Miami, USA, 31 October–3 November 2005, pp. 264–271.

Liu

Kutsuna

, ‘Fiber laser welding of 780 MPa high strength steel’ In Proceedings of the 25th International Conference on Applications of lasers and electro-optics, ICALEO2006, Laser Institute of America, Scottsdale, USA, 30 October–2 November 2006, pp. 562–568.

Brockmann

Mann

Schlueter

Havrilla

, ‘High performance industrial disk lasers for a broad range of applications’ In Proceedings of the 26th International Conference on Applications of lasers and electro-optics, ICALEO2007, Laser Institute of America, Orlando, USA, 29 October–1 November 2007, pp. 866–870.

Heß

Dausinger

, ‘Melt flow dynamics and process limitations in laser beam welding with brilliant laser beam sources using high welding velocities’ In Proceedings of the International Conference on Stuttgarter lasertage, Universitt Stuttgart, Stuttgart, Germany, 4–6 March 2008, p. 17.

Salminen

Lehtinen

Harkko

, ‘The effect of welding parameters on keyhole and melt pool behavior during laser welding with high power fiber laser’ In Proceedings of the 27th International Conference on Applications of lasers and electro-optics, ICALEO2008, Laser Institute of America, Temecula, California, 22–23 October 2008, pp. 354–363.

10.

Westin

Fellman

, ‘Laser hybrid welding of a lean duplex stainless steel’ In Proceedings of the 27th International Conference on Applications of lasers and electro-optics, ICALEO2008, Laser Institute of America, Temecula, California, 22–23 October 2008, pp. 526–534, paper 1202.

11.

Khan

P. A. A.

DebRoy

David

S. A.

, ‘Laser beam welding of high-manganese stainless steels — examination of alloying element loss and microstructural changes’ Weld. J. 67 (1989): 1s–7s.

12.

Salminen

Fellman

, ‘The effect of laser and welding parameters on keyhole and melt pool behavior during laser welding’ In Proceedings of the 26th International Conference on Applications of lasers and electro-optics, ICALEO2007, Laser Institute of America, Orlando, USA, 29 October–1 November 2007, pp. 416–427.

13.

Kessler

, Welding results (Burbach, Germany: IPG-Photonics Marketing Materials 2006).

14.

Zhang

Ashida

Katayama

Mizutani

Anma

Luo

, ‘High-power fiber laser welding of thick steel at low welding speed’ In Proceedings of the 26th International Conference on Applications of lasers and electro-optics, ICALEO2007, Laser Institute of America, Orlando, USA, 29 October–1 November 2007, pp. 850–857.

15.

Weberpals

Dausinger

Göbel

Brenner

, ‘The role of strong focusability on the welding process’ In Proceedings of the 25th International Conference on Applications of lasers and electro-optics, ICALEO2006, Laser Institute of America, Scottsdale, USA, 30 October–2 November 2006, pp. 553–561.

16.

Kaplan

Westin

Wiklund

Norman

, ‘Imaging in cooperation with modelling of selected defect mechanisms during fiber laser welding of stainless steel’ In Proceedings of the 27th International Conference on Applications of lasers and electro-optics, ICALEO2008, Temecula, California, Laser Institute of America, 22–23 October 2008, pp. 789–798.

17.

Rofin Sinar . Welding results (Hamburg, Germany: Rofin Sinar Technologies Marketing Materials 2001–2006).

18.

Trumpf . Welding results (Ditzingen, Germany: Trumpf Marketing Materials 2001–2006).

19.

Piili

Salminen

Lehtinen

Harkko

, ‘The keyhole and plasma formation studies of fiber laser-Mig/Mag hybrid welding’ In Proceedings of the 27th International Conference on Applications of lasers and electro-optics, ICALEO2008, Laser Institute of America, Temecula, California, 22–23 October 2008, pp. 506–515.

20.

Abt

Hess

Dausinger

, ‘Temporal behaviour of the focal shift of beam forming optics for high power single mode lasers’ In Proceedings of the 27th International Conference on Applications of lasers and electro optics, ICALEO2008, Laser Institute of America, Temecula, California, 22–23 October 2008, pp. 561–568.

21.

Ream

Zhang

Firestone

Walters

, ‘Zinc sulfide optics for high power laser applications’ In Proceedings of the 26th International Conference on Applications of lasers and electro-optics, ICA-LEO2007, Laser Institute of America, Orlando, USA, 29 October–1 November 2007, pp. 903–909, paper 1609.

22.

Reutzel

Brown

Meiner

, ‘Portable laser-based repair’ In Proceedings of the International Conference on Shipyard applications for industrial lasers, SAIL2008, Pennsylvania State University, Williambsburg, VA, 18–19 August 2008, 24 p.