Finite-element modelling and updating of laser spot weld joints in a top-hat structure for dynamic analysis

Abstract

Spot welds made by resistance spot welding are used extensively in automotive engineering. However, owing to increasing demands in the use of advanced and lightweight materials, laser welding has become a popular alternative for producing spot welds. Because of the complexity and uncertainties of laser welds and thus formed structures, the finite-element (FE) modelling of the welds for dynamic analysis is a research issue. This article first outlines some of the existing modelling works of spot welds. Then, a hat-plate structure used for this study is described and its FE representations are explained. The welds are modelled using CWELD elements in MSC/NASTRAN and their feasibility for representing laser spot welds is investigated. Numerical results for the initial FE model differ considerably from that of their experimental counterparts; hence, a model updating procedure is carried out to minimize the discrepancy between the two sets of results. In this work, the updating is posed as an optimization problem and is performed using the structural optimization capability (SOL 200) in MSC/NASTRAN. Two stages of updating are conducted, that is (a) updating FE models of individual components and (b) updating an FE model of the welded structure. Crucial steps in updating are explained. It is found that by selecting the right updating parameters, the CWELD element can be used to represent laser spot welds with good accuracy.

Keywords

finite-element modelling model updating modal testing laser welding spot weld joints CWELD

Get full access to this article

View all access options for this article.

References

Cho

S. J.

, ‘Resistance spot welding of aluminium and steel: A comparative experimental study’ J. Eng. Manuf. 217 (2003): 1355–1363.

Donders

Brughmans

Hermans

Liefooghe

Van der Auweraer

Desmet

, ‘The robustness of dynamic vehicle performance to spot weld failures’ Finite Elem. Anal. Des. 42 (2006): 670–682.

Deng

, ‘An evaluation of simplified finite element models for spot-welded joints’ Finite Elem. Anal. Des. 40 (2004): 1175–1194.

Deng

Chen

Shi

, ‘Three-dimensional finite element analysis of the mechanical behavior of spot welds’ Finite Elem. Anal. Des. 35 (2000): 17–39.

Maiti

S. K.

Walsh

C. A.

Bhadeshia

H. K. D. H.

, ‘Finite element simulation of laser spot welding’ Sci. Technol. Weld. Joining 8 5 (2003): 377–384.

Dong

Z. B.

Wei

Y. H.

, ‘Three dimensional modelling weld solidification cracks in multipass welding’ Theor. Appl. Fract. Mech. 46 (2006): 156–165.

Tsirkas

S. A.

Papanikos

Kermanidis

Th.

, ‘Numerical simulation of the laser welding process in butt-joint specimens’ J. Mater. Process. Technol. 134 (2003): 59–69.

Cho

S. K.

Yang

Y. S.

Son

K. J.

Kim

J. Y.

, ‘Fatigue strength in laser welding of the lap joint’ Finite Elem. Anal. Des. 40 (2004): 1059–1070.

Gaul

Nitsche

, ‘The role of friction in mechanical joints’ Appl. Mech. Rev. 54 2 (2001): 93–106.

10.

Ibrahim

R. A.

Pettit

C. L.

, ‘Uncertainties and dynamic problems of bolted joints and other fasteners’ J. Sound Vibr. 279 (2005): 857–936.

11.

Oldfield

Ouyang

Mottershead

J. E.

, ‘Simplified models of bolted joints under harmonic loading’ Comput. Struct. 84 (2005): 25–33.

12.

Kim

Yoon

J.-C.

Kang

B.-S.

, ‘Finite element analysis and modelling of structure with bolted joints’ Appl. Math. Modell. 31 (2007): 895–911.

13.

Mottershead

J. E.

Mares

James

Friswell

M. I.

, ‘Stochastic model updating: Part 2 – application to a set of physical structures’ Mech. Syst. Signal Process. 20 (2006): 2171–2185.

14.

Chen

Deng

, ‘Performance of shell elements in modelling spot-welded joints’ Finite Elem. Anal. Des. 35 (2000): 41–57.

15.

Heiserer

Chargin

Sielaff

, ‘High performance, process oriented, weld spot approach’ In Proceedings of the First MSC Worldwide Automotive User Conference, Munich, Germany, 1999.

16.

Salvini

Vivio

Vullo

, ‘A spot weld finite element for structural modelling’ Int. J. Fatigue 22 (2000): 645–656.

17.

Fang

Hoff

Holman

Mueller

Wallerstein

, ‘Weld modelling with MSC. Nastran’ In Proceedings of the Second MSC Worldwide Automotive Conference, MSC Software Corporation, 2000.

18.

Palmonella

Friswell

M. I.

Mottershead

J. E.

Lees

A. W.

, ‘Finite element models of spot welds in structural dynamics: Review and updating’ Comput. Struct. 83 (2005): 648–661.

19.

Ewins

D. J.

, Modal testing: Theory, practice and application (Taunton, UK: Research Studies Press Ltd 2000).

20.

Avitabile

, ‘Experimental modal analysis (a simple non-mathematical presentation)’ Sound Vibr. (2001): 1–15.

21.

Friswell

M. I.

Mottershead

J. E.

, Finite element model updating in structural dynamics (The Netherlands: Kluwer Academic Publishers, Dordrecht 1995).

22.

Friswell

M. I.

Inman

D. J.

Pilkey

D. F.

, ‘The direct updating of damping and stiffness matrices’ AIAA J. 36 2 (1998): 491–493.

23.

Mottershead

J. E.

Friswell

M. I.

, ‘Model updating in structural dynamics: A survey’ J. Sound Vibr. 167 2 (1993): 347–375.

24.

Kenigsbuch

Halevi

, ‘Model updating in structural dynamics: A generalised reference basis approach’ Mech. Syst. Signal Process. 12 1 (1998): 75–90.

25.

Mares

Friswell

M. I.

Mottershead

J. E.

, ‘Model updating using robust estimation’ Mech. Syst. Signal Process. 16 1 (2002): 169–183.

26.

Kim

G. H.

Park

Y. S.

, ‘An improved updating parameter selection method and finite element model update using multiobjective optimisation technique’ Mech. Syst. Signal Process. 18 1 (2004): 59–78.

27.

Jaishi

Ren

, ‘Finite element model updating based on eigenvalue and strain energy residuals using multiobjective optimisation technique’ Mech. Syst. Signal Process. 21 (2007): 2295–2317.

28.

Duan

Liu

Spencer

B. F.

, ‘Finite element model updating of structures using a hybrid optimization technique’ Proc. SPIE 5765 (2005): 335–344.

29.

Mottershead

J. E.

Mares

Friswell

M. I.

James

, ‘Selection and updating of parameters for an aluminium space-frame model’ Mech. Syst. Signal Process. 14 6 (2000): 923–944.

30.

Ahmadian

Gladwell

G. M. L.

Ismail

, ‘Parameter selection strategies in finite element model updating’ J. Vibr. Acoust. 119 1 (1997): 37–45.

31.

Gladwell

G. M. L.

Ahmadian

, ‘Generic element matrices suitable for finite element model updating’ Mech. Syst. Signal Process. 9 6 (1995): 601–614.