A new analytical model of a quasi one-dimensional non-adiabatic dust flame is developed with the assumption that the particle burning rate in the flame front is controlled by the process of oxygen diffusion. In this model, the flame propagation mechanism is considered to be radiation, conduction, and convection. Algebraic equations defining the laminar flame speed were obtained in two limiting cases: lean and rich mixtures. The flame structure is assumed to consist of a preheat zone, a reaction zone, and a postflame zone for lean mixtures and a preheat zone and a reaction zone for rich mixtures. Under the lean mixture approximation, values of the flame speed, lean limit, and flame temperature were calculated by adding the radiation term; flame temperature in the preheat zone increased, while it decreased in the postflame zone. This phenomenon may be attributed to the radiative heat transfer from the postflame zone to the preheat zone. Also, when the radiation term was considered, the flame speed increased but the lean limit decreased. In addition, radiation in the rich mixture resulted in the increase of the flame speed and the gas phase temperature in the preheat zone, whereas in the flame zone, the gas phase temperature decreased. Calculated values of the flame speed and flame temperature are in a good agreement with the experimental data in the literature.
BrooksK. P.BecksteadM. W., ‘Dynamics of aluminum combustion’J. Propuls. Power114 (1995): 769–780.
5.
DreizinE. L., ‘Experimental study of stages in aluminum particle combustion in air’Combust. Flame1054 (1996): 541–556.
6.
DreizinE. L., ‘Experimental study of aluminum particle flame evolution in normal and micro-gravity’Combust. Flame1163 (1999): 323–333.
7.
BucherP.YetterR. A.DryerF. L.VicenziE. P.ParrT. P.Hanson-parrD. M., ‘Condensed-phase species distributions about Al particles reacting in various oxidizer’Combust. Flame1171–2 (1999): 351–361.
8.
ShoshinY.DreizinE., ‘Particle combustion rates in premixed flames of polydisperse metal-air aerosols’Combust. Flame1333 (2003): 275–287.
9.
BecksteadM. W.LiangY.PudduppakkamK. V., ‘Numerical simulation of single aluminum particle combustion (review)’Combust. Explos. Shock Waves416 (2005): 622–638.
DesJardinP. E.FelskeJ. D.CarraraM. D., ‘Mechanistic model for aluminum particle ignition and combustion in air’J. Propuls. Power213 (2005): 478–485.
12.
YetterR. A.DryerF. L., ‘Metal particle combustion and classification’Micro-gravity combustion: Fire in free fall (New York: Academic Press2001): 419–478.
13.
CasselH. M., ‘Some fundamental aspects of dust flames, reports of investigations 6551, Bureau of Mines, 1963’.
14.
BallalD. R., ‘Flame propagation through dust clouds of carbon, coal, aluminum and magnesium in an environment of zero gravity’Proc. R. Soc. Lond. A385 (1983): 21–51 DOI: 10.1098/rspa.1983.0003.
15.
GoroshinS.BidabadiM.LeeJ. H. S., ‘Quenching distance of laminar flame in aluminum dust clouds’Combust. Flame105 (1996): 147–160.
16.
GoroshinS.FomenkoI.LeeJ. H. S., ‘Burning velocity in fuel-rich aluminum dust clouds’Proc. Combust. Inst.26 (1996): 1961–1967.
17.
ShoshinY.DreizinE. L., ‘Laminar lifted flame speed measurements for aerosols of metals and mechanical alloys’AIAA J.427 (2004): 1416–1426.
18.
BoichukL. V.ShevchukV. G.ShvetsA. I., ‘Flame propagation in two-component aluminum-boron gas suspensions’Combust. Explos. Shock Waves386 (2002): 651–654.
19.
GoroshinS.KolbeM.LeeJ. H. S., ‘Flame speed in a binary suspension of solid fuel particles’Proc. Combust. Inst.28 (2000): 2811–2817.
20.
RishaG. A.HuangY.YetterR. A.YangV., ‘Experimental investigation of aluminum particle dust cloud combustion’ In Proceedings of the 43rd Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 10–13 January 2005, AIAA paper 2005-739.
21.
HuangY.RishaG. A.YangV.YetterR. A., ‘Combustion of bimodal nano/micron-sized aluminum particle dust in air’Proc. Combust. Inst.31 (2007): 2001–2009.
22.
HuangY.RishaG. A.YangV.YetterR. A., ‘Analysis of nano-aluminum particle dust cloud combustion in different oxidizer environments’ In Proceedings of the 43rd Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 10–13 January 2005, AIAA paper 2005-738.
23.
HuangY.RishaG. A.YangV.YetterR. A., ‘Effect of particle size on combustion of aluminum particle dust in air’Combust. Flame15612009: 5–13 DOI: 10.1016/j.combustflame.2008.07.018.
24.
DreizinE. L., ‘Effect of phase changes on metal particle combustion processes’Combust. Explos. Shock Waves396 (2003): 681–693.
25.
EapenB. Z.HoffmannV. K.SchoenitzM.DreizinE. L., ‘Combustion of aerosolized spherical aluminum powders and flakes in air’Combust. Sci. Technol.1767 (2004): 1055–1069.
26.
YarinL. P.HetsroniG.MosyakA., Combustion of two phase reaction media (Berlin: Springer2004).
27.
BucherP.ErnstL.DryerF. L.YetterR. A.ParrT. P.Hanson-ParrD. M.YangV.BrillT. B.RenW. Z., ‘Detailed studies on the flame structure of aluminum particle combustion’Solid propellant chemistry, combustion, and motor interior ballistics (Progress in Astronautic and Aeronautics) (Reston, VA: AIAA2000): 689–722.
28.
PriceE. W.SigmanR. K.YangV.BrillT. B.RenW. Z., ‘Combustion of aluminized solid propellants’Solid propellant chemistry, combustion, and motor interior ballistics (Progress in Astronautic and Aeronautics) (Reston, VA: AIAA2000): 663–687.
29.
MelcherJ. C.IV, Combustion of single and agglomerated aluminum particle in solid rocket motor flows PhD Thesis, University of Illinois at Urbana-Champaign, 2001.
30.
WilsonJ. R., ‘The structure of liquid metals and alloys’Metall. Rev.10 (1965): 381–590.
31.
PriceE. W.KuoK.SummerfieldM., ‘Combustion of metalized propellants’Fundamentals of solid propellant combustion (Progress in Aeronautics and Astronautics) (New York: AIAA1984): 478–513.
32.
LiangY.BecksteadM. W., ‘Numerical simulation of unsteady, single aluminum particle combustion in air’ In Proceedings of the 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cleveland, OH, 13–15 July 1998, AIAA paper 1998-3825.
33.
BucherP.YetterR. A.DryerF. L.ParrT. P.Hanson-ParrD. M., ‘PLIF species and ratiometric temperature measurements of aluminum particle combustion in O2, CO2, and N2O oxidizers, and comparisons with model calculations’ In Proceedings of the 27th Symposium (International) on Combustion, Combustion Institute, Pittsburg, PA, 1998, pp. 2421–2429.
34.
MerzhanovA. G.GrigorjevYu. M.GalchenkoYu. A., ‘Aluminum ignition’Combust. Flame29 (1977): 1–14.
35.
PlassG. N., ‘Temperature dependence of the Mie scattering and absorption cross sections for aluminum oxide’Appl. Opt.412 (1965): 1616–1619.
36.
SiegelR.HowellJ. R., Thermal radiation heat transfer (Washington: Hemisphere Publishing Corp1981).
37.
ViskantaR.MengucM. P., ‘Radiation heat transfer in combustion systems’Prog. Energy Combust. Sci.13 (1987): 97–160.
38.
BidabadiM., An experimental and analytical study of laminar dust flame propagation PhD Thesis, MC Gill University, Canada, 1995.
39.
HackertC. L.EllzeyJ. L.EzekoyeO. A., ‘Effects of thermal boundary conditions on flame shape and quenching in ducts’Combust. Flame112 (1998): 73–84.
40.
SohrabS. H.LinanA.WilliamsF. A., ‘Asymptotic theory of diffusion-flame extinction with radiant loss from the flame zone’Combust. Sci. Technol.27 (1982): 143–154.
41.
JoulinG., ‘Temperature-lags and radiative transfer in particle-laden gaseous flames. Part I: Steady planar fronts’Combust. Sci. Technol.52 (1987): 377–395.
42.
JoulinG.CambrayP., ‘Temperature-lags and radiative transfer in particle-laden gaseous flames part II: Unsteady propagations’Combust. Sci. Technol.52 (1987): 397–412.
43.
ProustC.VeyssiereB., ‘Fundamental properties of flames propagating in starch dust-air mixtures’Combust. Sci. Technol.62 (1988): 149–172.
44.
BlouquinR.JoulinG., ‘On the influence of gradient transports upon the burning velocities of dust flames’Combust. Sci. Technol.115 (1996): 355–367.
45.
BlouquinR.JoulinG., ‘Propagation limits of dust/air flames diluted by addition of inert solid particles’ In Proceedings of the Twenty-Sixth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, vol. 26, issue 1, 1996, pp. 1565–1570.
46.
AtreyaA.AgrawalS., ‘Effect of radiative heat loss on diffusion flames in quiescent microgravity atmosphere’Combust. Flame115 (1998): 372–382.
47.
ProustC., ‘Flame propagation and combustion in some dust-air mixtures’J. Loss Prevent. Process Ind.19 (2006): 89–100.
48.
BohrenC. F.HuffmanD. R., Absorption and scattering of light by small particles (New York: Wiley1983).
49.
SmootL. D.SmithP. J., Coal combustion and gasification (New York: Plenum Chemical Engineering Series1985).
50.
KothandaramanC. P.SubramanyanS., Heat and mass transfer (New York: Wiley1977).
51.
HolmanJ. P., Heat transfer (New York: Mc Graw-Hill1990).
52.
MahamB. H., Elementary chemical thermodynamics (New York: W. A. Benjamin1964).
53.
Van de HulstH. C., Light scattering by small particles (New York: Wiley1957).
54.
WickramasingheN. C., Light scattering functions for small particles (New York: Wiley1973).
55.
JonesA. R., ‘Light scattering for particle characterization’Prog. Energy Combust. Sci.25 (1999): 1–53.
56.
GuruzK.MehnetY., ‘A theoretical study of the effect of scattering on radiative heat transfer’Archivum Combust.33 (1983): 193–210.
57.
HottelH. C.SarofimA. F., Radiative transfer (New York: McGraw-Hill1967).
58.
LevineP. H., ‘Absorption efficiencies for large spherical particles: A new approximation’Appl. Opt.1724 (1978): 3861–3862.
59.
GrayW. A.KilhamJ. K.MullerR., Heat transfer from flames (London: Paul Elek (Scientific Books) Ltd1976).
60.
NagendraC. L.ThutupalliG. K. M., ‘Determination of optical properties of absorbing materials: A generalized scheme’Appl. Opt.224 (1983): 587–591.
61.
OrdalM. A.LongL. L.BellR. J.BellS. E.BellR. R.AlexanderR. W.WardC. A., ‘Optical properties of the metals Al, Co, Cu, Au, Fe, Pb, Ni, Pd, Pt, Ag, Ti, and W in the infrared and far infrared’Appl. Opt.227 (1983): 1099–1119.
62.
ShilesE.SasakiT.InokutiM.SmithD. Y., ‘Self-consistency and sum-rule tests in the Kramers-Kronig analysis of optical data: Applications to aluminum’Phys. Revi. B224 (1980): 1612–1628.
63.
O'BryanH. M., ‘The optical constants of several metals in vacuum’J. Opt. Soc. Am. A26 (1936): 122–127.
64.
MalitsonI. H., ‘Refraction and dispersion of synthetic sapphire’J. Opt. Soc. Am. A5212 (1962): 1377–1379.
65.
PlassG. N., ‘Mie scattering and absorption cross sections for aluminum oxide and magnesium oxide’Appl. Opt.37 (1964): 867–872.
66.
GouesbetG.GrehanG.MaheuB., ‘Single scattering characteristics of volume elements in coal clouds’Appl. Opt.2213 (1983): 2038–2050.
67.
GaydonA. G., The spectroscopy of flame (London: Chapman and Hall1974).
