Numerical analysis of a centrifugal fan for performance enhancement using boundary layer suction slots

Abstract

Flow in centrifugal fans tends to be in a state of instability with flow separation zones on both the suction surface and the front shroud. The overall efficiency of the diffusion process in a centrifugal fan could be enhanced by judiciously introducing the boundary layer suction slots. With easy accessibility of computational fluid dynamics (CFD) as an analytical tool, an extensive numerical whole field analysis of the effect of boundary layer suction slots in discrete regions of suspected separation points is possible. This article attempts to explore the effect of boundary layer suction slots corresponding to various geometrical locations on the impeller as well as on the diffuser. The analysis shows that the suction slots located on the impeller blade near to its trailing edge appreciably improves the static pressure recovery across the fan. Slots provided at a radial distance of 30 per cent from the leading edge of the diffuser vane also significantly contribute to the static pressure recovery across the fan.

Keywords

boundary layer suction slot flow separation sliding mesh unsteady analysis recirculation zone jets and wakes

Get full access to this article

View all access options for this article.

References

Boyce

M. P.

, Gas turbine engineering hand book (USA: Gulf Professional Publishing 2006): 238–239.

Reacock

R. E.

, ‘Boundary-layer suction to eliminate corner separation in cascades of aerofoil's, Research Report’ (1965): University Engineering Department, Cambridge, 1965.

Khan

M. M. S.

Cornelius

K. C.

Tassa

, ‘Effect of suction on boundary-layer flow over a 2-D slot’ In Proceedings of the American Institute of Aeronautics and Astronautics, Aerospace Sciences Meeting, 20th, Orlando, FL, 11–14 January 1982, p. 11.

Seal

C. V.

Smith

C. R.

, ‘The control of turbulent end-wall boundary layers using surface suction’ Exp. Fluids 27 6 (1999): 484–496.

Raghunathan

Cooper

R. K.

, ‘Passive boundary layer control with slots in short diffusers’ ASME J. Fluids Eng. 122 3 (2000): 177–179.

Wursthorn

Schnerr

G. H.

, ‘Numerical investigations of cavitation control in pumps’ J. Appl. Math. Mech. 80 (2000): S663–S664

Hubrich

Bolcs

Ott

, ‘Boundary layer suction via a slot in a transonic compressor: Numerical parameter study and first experiments’ In Proceedings of the ASME Turbo Expo 2004 Power for Land, Sea, and Air, Austria, 2004, pp. 527–536, GT2004-53758.

Shojaefard

M. H.

Noorpoor

A. R.

Avanesians

Ghaffarpour

, ‘Numerical investigation of flow control by suction and injection on a subsonic airfoil’ Am. J. Appl. Sci. 2 10 (2005): 1474–1480.

Atik

Kim

C. Y.

Van-Dommelen

Walker

J. D. A.

, ‘Boundary-layer separation control on a thin airfoil using local suction’ J. Fluid Mech. 535 (2005): 415–443.

10.

Gajjar

J. S. B.

Smith

F. T.

, ‘Vortices and flow reversal due to suction slots’ Philos. Trans. R. Soc. 363 1830 (2005): 1199–1208.

11.

Dovgal

Sorokin

, ‘Application of flow suction for controlling the shedding of large-scale vortices at boundary-layer separation’ J. Appl. Mech. Tech. Phys. 47 4 (2006): 510–514.

12.

Song

Chen

Yang

Wang

, ‘A numerical investigation of boundary layer suction in compound lean compressor cascades’ ASME J. Turbomach. 128 2 (2006): 357–366.

13.

Atik

van Dommelen

, ‘Autogenous suction to prevent laminar boundary-layer separation’ J. Fluids Eng. 130 1 (2008):.

14.

Gbadebo

S. A.

Cumpsty

N. A.

Hynes

T. P.

, ‘Control of three-dimensional separations in axial compressors by tailored boundary layer suction’ ASME J. Turbomach. 130 1 2008: 011004.

15.

Fatsis

Pierret

Van den Braembussche

, ‘Three-dimensional unsteady flow and forces in centrifugal impellers with circumferential distortion of the outlet static pressure’ ASME J. Turbomach. 119 (1997): 94–102.

16.

Sorokes

J. M.

Borer

J. C.

Koch

J. M.

, ‘Investigation of the circumferential static pressure non-uniformity caused by centrifugal compressor discharge volute’ In Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition 98 GT 326, Stockholm, Sweden, 1998.

17.

Hillewaert

Van den Braembussche

R. A.

, ‘Numerical simulation of impeller-volute interaction in centrifugal compressors’ ASME J. Turbomach. 121 (1999): 603–608.

18.

Shi

Tsukamoto

, ‘Numerical study of pressure fluctuations caused by impeller-diffuser interaction in a diffuser pump stage’ Trans. ASME 123 9 (2001): 466–474.

19.

Sofiane

Smaïne

Farid

Robert

, ‘Flow study in the impeller–diffuser interface of a vaned centrifugal fan’ ASME J. Fluid Eng. 127 5 (2005): 495–502.

20.

Meakhail

Park

S. O.

, ‘A study of impeller-diffuser-volute interaction in a centrifugal fan’ ASME J. Turbomach. 127 (2005): 84–90.

21.

Fluent 6.3, Fluent Inc., Cavendish Court Lebanon, NH 03766, USA.