Role of electrolyte [NaCl] in current-carrying processes in electrochemical machining of iron work piece has been analysed in light of Onsagar equation of strong electrolyte. Over-voltage-calculated with respect to equilibrium gap and penetration rate, shows that only a narrow range of equilibrium gap and penetration rate are admissible. It has been found that the maximum specific conductance of NaCl solution is 0.0387 ohm-1 cm-1 at 1.5 M NaCl concentration. It appears that NaCl contribute only a fraction of current, on the other hand H+ and OH-produced by electrolysis of water play an important role in the current-carrying process.
DavydovA.Electrochemical machining of metals, 1989 (MIR Publishers, Moscow).
2.
RajurkarK. P.ZhuD.McGeoughJ. A.KozakJ.De SilvaA.New developments in electrochemical machining. Ann. CIRP, 1999, 48(2), 567–579.
3.
ZhouJ. J.WangX. M.PangG. B.Research on non-traditional finishing. J. Dallan Univ. Technol., 2003, 43(1), 51–56.
4.
KaoJ. Y.TarngY. S.A neural network approach for the on-line monitoring of the electrial discharge machining process. J. Mater. Process Technol., 1997, 69, 112–119.
5.
RajurkarK. P.ZhuD.WeiB.Minimization of machining allowance in electrochemical machining. Ann. CIRP, 1997, 47(1), 165–168.
6.
RiskoD. G.DavydovA. D.Manufacturing applications and productivity limitations of electrochemical machining. Manuf. Sci. Eng. ASME PED, 1993, 64, 701–711.
7.
ZhouJ. J.ZhaiX. B.PangG. B.LiH. Y.XuW. J.GuoL. S.Research on pulse electrochemical finishing. J. Dallan Univ. Technol., 2003, 43, 311–314.
8.
ChenY.-L.ZhuS.-M.LeeS.-J.WangJ. C.The technology combined electrochemical mechanical polishing. J. Mater. Process Technol., 2003, 140, 203–205.
9.
KahlesJ. F.Metals hand book. In Electrochemical machining(Ed. TaylerLynian), 1967, 8th edition, vol. 3, 44073 (Machining American Society for Metals, Metals Park, OH).
10.
JainV. K.MuruganS.Investigations into the effect of cathode material on temperature distribution during electrochemical machining. Int. J. Prod. Res., 1980, 24, 439–450.
11.
HopenfeldJ.ColeR. R.Prediction of the one dimentional equilibrium cutting gap in electrochemical machining. Trans. ASME J. Eng. Ind., 1969, B8, 755–765.
12.
HopenfieldJ.ColeR. R.Electrochemical machining prediction and correlation of process variables. Trans. ASME J. Eng. Ind., 1966, 88(4), 455–461.
13.
LandoltD.AcostaR.MullerR. H.TobiasC. W.An optical study of cathodic hydrogen evolution in high-rate electrolysis. J. Electro. Chem. Soc., 1970, 117(6), 839–845.
14.
ThorpeJ. F.ZerkleR. D.Analytic determination of the equilibrium gap in electrochemical machining. Int. J. Mech. Tool Des. Res., 1969, 9, 131–144.
15.
MoorW. J.Physical chemistry, 1990, p. 444 (Orient Longman, New Delhi).
16.
McGeoughJ. A.Principles of electrochemical machining, 1974, chapter III (Chapman & Hall, London).
17.
GlasstoneS.Text book of physical chemistry, 1990, p. 905 (McMillan India Limited, Madras).
18.
HMT Banglore.Electrochemical machining in production technology, 1980, p. 478 (Tata McGraw-Hill Publishing Company Limited, New Delhi).
