Thermal and economical optimization for a finned-tube,air-cooled condenser design of a roof-top bus air-conditioning system

Abstract

The current paper presents a methodology of a design optimization technique that can be useful in assessing the best configuration of a finned-tube condenser, using a thermal and economical optimization approach. The assessment has been carried out on an air-cooled finned-tube condenser of a vapour compression cycle for a roof-top bus air-conditioning system at a specified cooling capacity. The methodology has been conducted by studying the effect of some operational and geometrical design parameters for the condenser on the entire cycle exergy destruction or irreversibility, air-conditioning system coefficient of performance (COP), and total annual cost. The heat exchangers for the bus air-conditioning system are featured by a very compact frontal area due to the stringent space limitations and structure standard for the system installation. Therefore, the current study also takes in its account the effect of the varying design parameters on the condenser frontal area. The irreversibility due to heat transfer across the stream-to-stream temperature-difference and due to frictional pressure-drops is calculated as a function of the design parameters. A cost function is introduced, defined as the sum of two contributions, the investment expense of the condenser material and the system compressor, and the operational expense of air-conditioning system, which is usually driven by an auxiliary engine or coupled with the main bus engine. The optimal trade-off between investment and operating cost is therefore investigated. A numerical example is discussed, in which, a comparison between the commercial condenser design and optimal design configuration has been presented in terms of the system COP and condenser material cost. The results show that a significant improvement can be obtained for the optimal condenser design compared to that of the commercial finned-tube condenser, which is designed based on the conventional values of the design parameters.

Keywords

thermoeconomic design optimization finned-tube heat exchanger air-cooled condenser exergy destruction modelling

Get full access to this article

View all access options for this article.

References

El-Sayed

Y. M.

Evans

R. B.

Thermoeconomics and the design of heat systems. ASME J. Eng. Power, 1970, 92, 27–35.

Alefeld

What are thermodynamic losses and how to measure them? A future for energy. In Proceedings of the World Energy Symposium, Italy, May 1990.

Klein

S. A.

Reindl

D. T.

The relationship of optimum heat exchanger allocation and minimum entropy generation for refrigeration cycles. In Proceedings of the ASME Advanced Energy Systems Division, 1997, vol. 37 87–94.

Bejan

Entropy generation minimization, the method of thermodynamic optimization of finite-size systems and finite-time processes, 1996 (CRC Press, New York).

Bejan

Pfister

P. A.

Evaluation and heat transfer augmentation techniques based on their impact on entropy generation. Lett. Heat Mass Transf., 1980, 7, 97–106.

Stewart

S.W.

Shelton

S.W.

Finned-tube condenser design optimization using thermoeconomic isolation. In Proceedings of t21st IIR International Congress of Refrigeration, 2003, Washington, DC, 17–22 August 2003, Page 1–8, Paper no. ICR0634.

Dentice d'Accadiaa

Vanoli

Thermoeconomic optimisation of the condenser in a vapour compression heat pump. Int. J. Refrig., 2004, 27, 433–441.

Khamis Mansour

Musa

M. N.

Wan Hassan

M. N.

Thermal design of a compact condenser for automotive air-conditioning system. In Proceedings of 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE/SOMCHE 2005, CPE-50), Malaysia, 8–10 December 2005.

Khamis Mansour

Musa

M. N.

Wan Hassan

M. N.

Abdullah

Theoretical and experimental simulation of roof-top bus multiple-circuit air-conditioning system performance. Proc. IMechE, Part C: J. Mechanical Engineering Science, 2007, in press.

10.

Wall

Optimization of refrigeration machinery. Int. J. Refrig., 1991, 14, 336–340.

11.

Park

Y. C.

McEnaney

Boewe

Steady state and cycling performance of a typical R134a mobile A/C system. In SAE International Congress and Exposition, Detroit, Michigan, Climate Control Systems, March 1999, 8 pp., Paper no. 1999–01–1190.

12.

VanWylen

G. J.

Sonntag

R. E.

Borgnakke

CATT: Computer-aided thermodynamic tables. In Fundamentals of classical thermodynamics, 4th edition, 1994 (John Wiley & Sons, Inc.).

13.

McLinden

Gallagher

Weber

Morrison

Ward

Goodwin

, et al. Measurement and formulation of the thermodynamic properties of refrigerants 134a and R123. ASHRAE Trans., 1989, 95(Pt 2), 263–2834.

14.

X. M.

Webb Ralph

Thermal and hydraulic analysis of a brazed aluminum evaporator. Appl. Therm. Eng., 2002, 22, 1369–1390.