An approach to the selection of mechanism types in computer-aided conceptual design

Abstract

The selection of mechanism type is one of the important aspects in conceptual design of machine products. The paper applies the set theory for representing the attribute items of kinematic function to reflect the kinematic state and the function quality to reflect overall performances of the function unit for some complex design task. It gives a set-theory-based mode for the selection of mechanism types, in which precise reasoning by computer is combined with fuzzy appraisement by human. By precise reasoning at first, the computer selects from mechanisms database those mechanisms that can meet the kinematic requirements of the function unit to be solved. And then the function qualities of the selected mechanisms are appraised by human approving, which is actually a process of fuzzy match. This approach avoided the difficulty that the computer cannot yet effectively process fuzzy information and is suitable for the selection of both single-degree-of-freedom (DOF) and many-DOF mechanisms. The selected mechanisms can thus meet the requirements not only of the kinematic function, but also of the function quality. The approach presented in the current paper has been successfully applied to the software development of computer-aided conceptual design of mechanism systems.

Keywords

mechanism type selection set theory computer-aided conceptual design

Get full access to this article

View all access options for this article.

References

Erdman

A. G.

Thompson

T. R.

Riley

D. R.

Type selection of robot and gripper kinematic topology using expert systems. Int. J. Robot. Res. 1986 5(2)183–189.

Hoeltzel

D. A.

Chieng

W. H.

Knowledge-based approaches for the creative synthesis of mechanisms. Comput. Aided Des. 1990 22(1–2)57–67.

Yang

Investigated system for design of mechanisms by an expert system-DOMES. ASME J. Mech. Des. 1991 113 25–31.

Chiou

S. J.

Kota

Automated conceptual design of mechanisms. Mech. Mach. Theory 1999 34(3)467–495.

Xue

L. H.

Scheme generation and evaluation methods of conceptual design of mechanical products (in Chinese). PhD Thesis, Dalian University Technology2006.

Chen

W. M.

Application of a comprehensive decision method of fuzzy mathematics in selecting mechanism types (in Chinese). Mech. Sci. Technol. 1999 18(2)262–264.

Liu

C. Y.

The decision method of mechanism type selection in layout design (in Chinese). J. Nanjing Univ. Sci. Technol. 2001 25(2)156–159.

Tang

Zuo

H. J.

Accomplishing CAD of mechanical kinematic scheme by the design unit approach (in Chinese). J. Comput. Aided Des. Comput. Graph. 2000 12(8)614–617.

Tang

Tong

Identification of mechanism function in automated conceptual design (in Chinese). J. Mach. Des. 2000 17(12)39–41.

10.

Tang

Automated synthesis theory and realization for mechanism types (in Chinese). PhD Thesis, Shanghai Jiaotong University2000.

11.

Tang

Research on automated system for selection and combination of mechanisms based on set theory (in Chinese). Report of Postdoctoral Research Work, Donghua University, Shanghai, People's Republic of China2002.

12.

Tang

Zou

H. J.

The principle for automated connection of mechanisms and its realization. Mech. Mach. Theory 2001 36(8)997–1008.

13.

Tang

Many-degree of freedoms mechanism combination in automated conceptual design of mechanism systems. Proc. IMechE Part C:J. Mechanical Engineering Science 2006 220(C5)727–740.

14.

Tang

Theory and method for conceptual design of products (in Chinese) 2006 (National Defense Industry Press Beijing, People's Republic of China).