Experimental measurement of axial clearance in scroll compressor using eddy current displacement sensor

Abstract

This paper describes a method by using eddy current displacement sensor for the measurement of axial clearance in a water-lubricated scroll air compressor. The basic physical principle of the sensor is reviewed. An effective experimental configuration is established and the test procedure is designed to acquire proper data. The output signal which gives us useful waveforms is obtained by the data acquisition program based on virtual instrument technology. The actual tested results show that the eddy current sensor has high sensitivity and preferable static and dynamic performances. The actual axial clearance of the scroll air compressor under a working condition was measured and the tested results showed that the axial clearance is larger than that in refrigeration scroll compressor. In addition, the frequencies of signal pulse also reflect the change in rotational speed by analysing the output voltage signals. The actual experimental results could reflect the real situation of axial clearance of the scroll air compressor. It is of significance to further study on the relationship between the axial clearance and the performance of the scroll air compressor.

Keywords

axial clearance eddy current sensor measurement scroll compressor

Get full access to this article

View all access options for this article.

References

Zhao

Y. Y.

L. L.

Shu

P. C

. Thermodynamic simulation of scroll compressor expander module in automotive fuel cell engine. Proc. IMechE Part D: J. Automobile Engineering2006220(D5)571–577.

Oku

Anami

Ishii

. Gas leakage in CO2 and R22 scroll compressors and its use in simulations of optimal performance. In Proceedings of the International Conference on Compressors and their Systems, London2005, pp. 403–412.

Lee

G. H

. Performance simulation of scroll compressors. Proc. Instn Mech. Engrs Part A: J. Power and Energy2002216(A2)169–180.

Lin

C. C.

Chang

Y. F.

Liang

Hung

C. H

. Temperature and thermal deformation analysis on scrolls of scroll compressor. Appl. Therm. Eng.200525(8)1724–1739.

Fabian

Sangkyun

Prinz

. Capacitive blade tip clearance measurements for a micro gas turbine. In Proceedings of the 19th IEEE, Anchorage2002, pp. 1011–1015.

Dowell

Sylvester

Krupp

Zipfel

. Progress in turbomachinery prognostics and health management via eddy-current sensing. In Proceedings of the Aerospace Conference, Big Sky, MT, USA2000, pp. 133–143.

Liu

S. H.

J. J.

Zhou

L. B.

Wei

. Experimental investigation of the oil film lubricating piston rings. SAE Spec. Public.19961210(10)33–37.

Schein

Radermacher

. Scroll compressor simulation model. J. Eng. Gas Turbines Power2001123(1)127–225.

Lee

B. C.

Yanagisawa

Fukuta

. A study on the leakage characteristics of tip seal mechanism in the scroll compressor. In Proceedings of the International Compressor Engineering Conference, Purde2002, pp. 960–968.

10.

Tian

G. Y.

Zhao

Z. X.

Balines

R. W

Corcoran

. Blind sensing. Manuf. Eng.199776(4)179–182.

11.

Roper

. A high-frequency eddy current method for the thickness measurement of thin metallic foils using ferrite-core transmission systems. NDTE Int.200033(3)163–172.

12.

X. N.

Wang

F. X.

Wang

B. G

. Application of eddy-current sensor for air gap detection in magnetic suspension motors. In Proceedings of the 5th International Conference on Electrical Machines and Systems, Shenyang, China2001, pp. 326–329.