A fast model of roll stack deformation is presented. Appropriate simplified structural models are chosen by careful consideration of the application of general theories. Discretization of continuous variables allows the use of matrix-based weighting functions in describing component deformation and leads to a vectorized solution. All model non-linearities are considered, with particular attention given to the variable region of contact between adjacent rolls in the stack. A novel and efficient ‘binary choice matrix’ method is developed to describe the uncertainty in defining this region. This leads to a more efficient solution than previously published related models. Opportunities for future extensions are discussed.
HabberleyP. J.Market requirements of metal packaging. In Fifth International Rolling Conference, Imperial College, London, 1990 (Institute of Metals).
2.
MolotilovB. V.ShabalovI. P.DeevA. I.Trends in development of casting and rolling units. Steel in the USSR, 1991, 21(6), 264–267.
3.
DaviesG. M.Effects of dimensional and shape deviation of steel products on automotive processing operations. In Fifth International Rolling Conference, Imperial College, London, 1990 (Institute of Metals).
4.
HartleyP.SturgessC. E. N.LiuC.RoweG. W.Experimental and theoretical studies of workpiece deformation, stress, and strain during flat rolling. Int. Mater. Rev., 1989, 34(1), 19–34.
5.
MontmittonetP.BuesslerP.A review of theoretical analyses of rolling in Europe. ISIJ Int., 1991, 31(6), 525–538.
6.
MantylaP.KorhonenR.JonssonN. G.Improved thickness and shape accuracy with advanced pass scheduling in plate rolling. J. Mater. Proc. Technol., 1992, 34(1–4), 255–263.
7.
BabkinA. G.BelowevichV. K.PimenovA. F.KhaidarovaA. D.Calculation of cold-rolling schedule for chromium nickel stainless-steel on 1700 mill. Steel in the USSR, 1991, 21(1), 28–30.
8.
OikeY.SatoJ.KawashimaT.MatsuuraY.YonedaE.HasegawaH.Development of high-accuracy set-up technology in hot strip mill. Tetsu to Hagane, J. Iron and Steel Inst. Japan, 1993, 79(3), 345–351.
9.
PawelskiO.RaspW.RieckmannJ.A mathematical model for describing the elastical and plastical deformations in cold-rolling mills. Stahl und Eisen, 1989, 109(20), 967–975.
10.
ShohetK. N.TownsendN. A.Roll bending methods of crown control in four-high plate mills. J. Iron and Steel Inst., 1968, 1088–1098.
11.
YeS.SamarasekeraI. V.Role of spray cooling on thermal behaviour and crown development in hot-strip. Iron and Steelmaker, 1994, 21(7), 49–60.
12.
RaudenskyM.HorskyJ.Thermal model of rolls and sheets improvement by experimental study of cooling. J. Mater. Proc. Technol., 1992, 34(1–4), 247–253.
13.
AtackP.RobinsonI. S.An investigation into the control of thermal camber by spray cooling. J. Mater. Proc. Technol., 1994, 45(1–4), 125–130.
14.
ChenS. J.TsengA. A.Spray and jet cooling in steel rolling. Int. J. Heat and Fluid Flow, 1992, 13(4), 358–369.
15.
RosenthalD.CVC technology on hot and cold strip rolling mills. R. de Met.-Cah. d'inf. Tech., 1988, 85(7), 597–606.
16.
JiangZ.WangG.ZhangQ.MaD.TangC.WuG.Shifting-roll profile and control characteristics. J. Mater. Proc. Technol., 1993, 37(1–4), 53–60.
17.
PetitB.CaillaudR.SeigneurbieuxM.SerenaG.Thickness improvements associated with stretching and stand mechanics for the hot-rolling mill. R. de Met.-Cah. d'inf. Tech., 1993, 90(10), 1255–1264.
18.
HacquinA.MontmitonnetP.GuilleraultJ. P.Experimental validation of a rolling stand elastic-deformation model. J. Mater. Proc. Technol., 1994, 45(1–4), 199–206.
19.
SpoonerP. D.BryantG. F.Analysis of shape and discussion of problems of scheduling set-up and shape control. In The Metals Society Conference on Shape Control, London, 1976, pp. 19–29.
20.
WangG.PanD.WangT.The roll elastic deformation in the mills with rolls shifted transversely. In Fourth International Steel Rolling Conference, Deauville, France, 1987.
21.
YuenW. Y. D.WechnerB.A physical model for on-line roll bending set up in cold rolling. In Fifth International Rolling Conference, Imperial College, London, 1990 (Institute of Metals).
22.
BryantG. F.HeseltonM. O.Roll-gap temperature models for hot mills. Metals Technol., 1982, 9, 469–477.
23.
YaritaI.Problems of friction, lubrication, and materials for rolls in the rolling technology. Trans. Iron and Steel Inst. Japan, 1984, 24(12), 1014–1035.
24.
LenardJ. G.MalinowskiZ.Measurements of friction during the warm rolling of aluminium. J. Mater. Proc. Technol., 1993, 39(3–4), 357–371.
25.
BruceR. W.KarabinM. E.PanchanadeeswaranS.LalliL. A.RichmondO.DevenpeckM. L.LuS. C. Y.SheppardT.Experimental and analytical comparison of interface and internal variables in cold rolling. Am. Soc. Mech. Engng, Mater. Div., MD, 1988, 8, 49–57.
26.
CottrellA. H.The Mechanical Properties of Matter, 1964 (John Wiley, New York).
27.
AllwoodJ. M.Online modelling and control of shape phenomena in metal rolling. PhD thesis, University of London, 1993.
28.
ChiuY. P.WeinsteinA. S.ZorowskiC. F.The stresses, deformations and bending of a simply supported cylinder subjected to a symmetric normal surface loading. Int. J. Mech. Sci., 1963, 5, 119–136.
29.
BoussinesqJ.Application des Potentiels, 1885, Paris.
30.
TimoshenkoS.GoodierJ. N.Theory of Elasticity, 1951 (McGraw-Hill, London).
31.
ChiuY. P.WeinsteinA. S.ZorowskiC. F.The stresses, deformations and bending of a simply supported cylinder subjected to a symmetric normal surface loading. Int. J. Mech. Sci., 1963, 5, 119–136.
32.
RoarkR. J.Formulas for Stress and Strain, 1965 (McGraw-Hill, London).
33.
SaxlK.Transverse taper and instability in four-high rolling. Proc. Instn Mech. Engrs, Part E, 1991, 205(E2), 91–95.
34.
HugginsF. J. G.Roll indentation: Its relation to limiting reduction and limiting thickness in cold rolling. J. Inst. Metals, 1966, 238.
35.
GolubG. H.Van LoanC. F.Matrix Computations, 1983 (North Oxford Academic Publishing).
36.
AllwoodJ. M.StubbsR. E.BryantG. F.An efficient treatment of binary nonlinearities applied to elastic contact problems without friction. J. Engng Math., 1977, 31, 81–98.
37.
AllwoodJ. M.Achieving manufacturing advantage through efficient mill preset. The Annual Rolling Meeting, Royal Institute of International Affairs, London, 1995 (Institute of Metals).
38.
MatsubaraS.HaraK.TakezoeA.Optimization of work roll taper for extremely-thin strip rolling. ISIJ Int., 1989, 29(1), 58–63.
